Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються
The article reviews the common elements of prefabricated modular building metal structures with a list of their advantages and assessment of the prospects for the manufacture of their important components in the LFC process. Such construction with the use of metal structures must have all the prereq...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/29 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471907153248256 |
|---|---|
| author | Шинський, Володимир Дорошенко, Володимир |
| author_facet | Шинський, Володимир Дорошенко, Володимир |
| author_sort | Шинський, Володимир |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-05-21T04:54:25Z |
| description | The article reviews the common elements of prefabricated modular building metal structures with a list of their advantages and assessment of the prospects for the manufacture of their important components in the LFC process. Such construction with the use of metal structures must have all the prerequisites to become an impetus and an effective solution in the construction industry, which will contribute to the reconstruction of the country. The fabrication of connector assemblies and bolt brackets for connecting beams and connectors with flexible steel plates for seismically unstable conditions is considered. In the department of prof. O.I. Shinsky since 2011 a number of frame-cell thin-walled cast structures have been patented on the basis of models made of expanded polystyrene, which are assembled mainly from repeating elements, and which is similar to the modern method of mounting prefabricated building metal structures. We have also gained experience in casting with LFC parts with cast threads, which simplifies the serial production of ball joints and conical tips for tubular elements. When constructing hangars and warehouses with shell vaults, reducing the weight of metal shells with the obligatory preservation of their required strength is an important requirement for the design of such structures. For this purpose, in particular, the method of inversion of flexible hanging nets formed from a flat state by gravity is used for building structures. The article uses the fact that the inverted chain line serves as an ideal outline for arches and domes, as homogeneous arches in the form of such a line undergo only compression deformation, but not bending. The method of physical modeling of the support surface of the momentless vault shell of a complex curved surface by the method of inversion of the sagging heated thermoplastic synthetic film was developed, which turned out to be simpler than the method of inversion of hanging nets. |
| first_indexed | 2026-03-12T15:49:59Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-29 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:49:59Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-292023-05-21T04:54:25Z Cast elements of modular building metal structures for their production by Lost Foam Casting Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються Шинський, Володимир Дорошенко, Володимир modular constructions building metal constructions modeling shell constructions metal casting metal savings Lost Foam Casting модульні конструкції будівельні металоконструкції моделювання оболонкові конструкції виливки заощадження металу лиття за моделями, що газифікуються The article reviews the common elements of prefabricated modular building metal structures with a list of their advantages and assessment of the prospects for the manufacture of their important components in the LFC process. Such construction with the use of metal structures must have all the prerequisites to become an impetus and an effective solution in the construction industry, which will contribute to the reconstruction of the country. The fabrication of connector assemblies and bolt brackets for connecting beams and connectors with flexible steel plates for seismically unstable conditions is considered. In the department of prof. O.I. Shinsky since 2011 a number of frame-cell thin-walled cast structures have been patented on the basis of models made of expanded polystyrene, which are assembled mainly from repeating elements, and which is similar to the modern method of mounting prefabricated building metal structures. We have also gained experience in casting with LFC parts with cast threads, which simplifies the serial production of ball joints and conical tips for tubular elements. When constructing hangars and warehouses with shell vaults, reducing the weight of metal shells with the obligatory preservation of their required strength is an important requirement for the design of such structures. For this purpose, in particular, the method of inversion of flexible hanging nets formed from a flat state by gravity is used for building structures. The article uses the fact that the inverted chain line serves as an ideal outline for arches and domes, as homogeneous arches in the form of such a line undergo only compression deformation, but not bending. The method of physical modeling of the support surface of the momentless vault shell of a complex curved surface by the method of inversion of the sagging heated thermoplastic synthetic film was developed, which turned out to be simpler than the method of inversion of hanging nets. В статті виконано огляд поширених елементів швидкозбірних модульних будівельних металоконструкцій з переліком їх переваг та оцінкою перспективи виготовлення їх важливих вузлів за ЛГМ-процесом. Таке будівництво із застосуванням металоконструкцій має всі передумови стати імпульсом та ефективним рішенням в будівельній галузі, що сприятиме відбудові країни. Розглянуто виготовлення вузлів-конекторів та болтових кронштейнів для з’єднання балок та конекторів з гнучкими сталевими пластинами для сейсмічно нестабільних умов. У відділі проф. О.Й. Шинського, починаючи з 2011 року, запатентовано ряд каркасно-комірчастих тонкостінних литих конструкцій за моделями з пінополістиролу, що зібрані переважно з елементів, які повторюються, і що аналогічно до сучасного способу монтування збірних будівельних металоконструкцій. Також накопичено досвід лиття методом ЛГМ деталей з литою різьбою, що спрощує серійне виготовлення кульових вузлів сполучення та конічних наконечників для трубчастих елементів. При зведенні ангарів і складів з оболонковими склепіннями, зниження ваги металевих оболонок з обов’язковим зберіганням їх необхідної міцності є важливою вимогою до проєктування таких конструкцій. Для цього, зокрема, для будівельних конструкцій застосовують метод інверсії гнучких висячих сіток, що формуються з плоского стану дією сили тяжіння. З використанням того, що перевернута ланцюгова лінія слугує ідеальним обрисом для арок і куполів, оскільки однорідні арки в формі такої лінії зазнають лише деформації стиснення, але не вигину, було відпрацьовано метод фізичного моделювання опорної поверхні безмоментної склепінчастої оболонки складної криволінійної поверхні способом перевертання провисаючої нагрітої термопластичної синтетичної плівки, що виявилось простіше, ніж за методом перевертання висячих сіток. Physico-technological Institute of Metals and Alloys 2023-05-21 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/29 Metal and Casting of Ukraine; Vol. 30 No. 3 (2022): Метал та лиття України Метал та лиття України ; Том 30 № 3 (2022): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/29/29 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | модульні конструкції будівельні металоконструкції моделювання оболонкові конструкції виливки заощадження металу лиття за моделями що газифікуються Шинський, Володимир Дорошенко, Володимир Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| title | Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| title_alt | Cast elements of modular building metal structures for their production by Lost Foam Casting |
| title_full | Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| title_fullStr | Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| title_full_unstemmed | Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| title_short | Литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| title_sort | литі елементи модульних будівельних металоконструкцій за моделями, що газифікуються |
| topic | модульні конструкції будівельні металоконструкції моделювання оболонкові конструкції виливки заощадження металу лиття за моделями що газифікуються |
| topic_facet | modular constructions building metal constructions modeling shell constructions metal casting metal savings Lost Foam Casting модульні конструкції будівельні металоконструкції моделювання оболонкові конструкції виливки заощадження металу лиття за моделями що газифікуються |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/29 |
| work_keys_str_mv | AT šinsʹkijvolodimir castelementsofmodularbuildingmetalstructuresfortheirproductionbylostfoamcasting AT dorošenkovolodimir castelementsofmodularbuildingmetalstructuresfortheirproductionbylostfoamcasting AT šinsʹkijvolodimir litíelementimodulʹnihbudívelʹnihmetalokonstrukcíjzamodelâmiŝogazifíkuûtʹsâ AT dorošenkovolodimir litíelementimodulʹnihbudívelʹnihmetalokonstrukcíjzamodelâmiŝogazifíkuûtʹsâ |