Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу
Ductile cast irons of ferritic class with higher plasticity are widely used in production of machine parts that operate under shock-cyclic and dynamic loads, including at low temperatures. In the European Union countries ferritic ductile cast irons with strength Rm ≥ 450 MPa and elongation A ≥ 18 %...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/30 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471905969405952 |
|---|---|
| author | Бубликов, Валентин Нарівський, Анатолій Бачинський, Ю. Д. Нестерук, Олена |
| author_facet | Бубликов, Валентин Нарівський, Анатолій Бачинський, Ю. Д. Нестерук, Олена |
| author_sort | Бубликов, Валентин |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-05-21T05:21:25Z |
| description | Ductile cast irons of ferritic class with higher plasticity are widely used in production of machine parts that operate under shock-cyclic and dynamic loads, including at low temperatures. In the European Union countries ferritic ductile cast irons with strength Rm ≥ 450 MPa and elongation A ≥ 18 % (standard EN 1563:18, grade EN-GJS-450-18) are developed. Traditional production technologies of such cast irons are inefficient and they require the use of expensive refined blast furnace cast irons in the charge and energy-intensive heat treatment. The article presents the data on influence of the main structure formation factors on mechanical properties of ferritic ductile cast irons. The results of these studies allow: to clarify the optimal concentrations of chemical elements; to increase the intensity of physicochemical modifying and refining processes; to choose the rational heat treatment modes; to reduce the production cost of cast products. For implementation of this technology cheaper charge materials and high efficient ferrosilicon-magnesium-calcium modifiers are used at less energy consumption for castings heat treatment. The technology of obtaining ferritic class ductile cast iron, which has the following high mechanical properties (Rm = 497–541 MPa; A = 22.0–24.7 %; KC = 134–152 J/cm2 with Brinell hardness of 156–170 HB) has been developed. The research results create preconditions for the development of new parts designs for modern technic with given high mechanical properties and performance characteristics which blanks are obtained with casting method and of high-efficiency economic technologies for their production. |
| first_indexed | 2026-03-12T15:49:58Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-30 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:49:58Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-302023-05-21T05:21:25Z Development of technologies of high-plastic ductile cast irons of ferritic class obtaining Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу Бубликов, Валентин Нарівський, Анатолій Бачинський, Ю. Д. Нестерук, Олена ductile cast iron ferrite modifier mechanical properties heat treatment process високоміцний чавун ферит модифікатор механічні властивості термічне оброблення процес Ductile cast irons of ferritic class with higher plasticity are widely used in production of machine parts that operate under shock-cyclic and dynamic loads, including at low temperatures. In the European Union countries ferritic ductile cast irons with strength Rm ≥ 450 MPa and elongation A ≥ 18 % (standard EN 1563:18, grade EN-GJS-450-18) are developed. Traditional production technologies of such cast irons are inefficient and they require the use of expensive refined blast furnace cast irons in the charge and energy-intensive heat treatment. The article presents the data on influence of the main structure formation factors on mechanical properties of ferritic ductile cast irons. The results of these studies allow: to clarify the optimal concentrations of chemical elements; to increase the intensity of physicochemical modifying and refining processes; to choose the rational heat treatment modes; to reduce the production cost of cast products. For implementation of this technology cheaper charge materials and high efficient ferrosilicon-magnesium-calcium modifiers are used at less energy consumption for castings heat treatment. The technology of obtaining ferritic class ductile cast iron, which has the following high mechanical properties (Rm = 497–541 MPa; A = 22.0–24.7 %; KC = 134–152 J/cm2 with Brinell hardness of 156–170 HB) has been developed. The research results create preconditions for the development of new parts designs for modern technic with given high mechanical properties and performance characteristics which blanks are obtained with casting method and of high-efficiency economic technologies for their production. Високоміцні чавуни феритного класу з підвищеною пластичністю широко застосовуються для одержання деталей машин, які працюють в умовах ударно-циклічних та динамічних навантажень, а також за низьких температур. У країнах Європейського союзу розроблені високоміцні чавуни феритного класу, міцність яких σВ ≥ 450 МПа і відносне видовження d ≥ 18 % (стандарт EN 1563:18, марка EN-GJS-450-18). Традиційні технології виготовлення таких чавунів малоефективні та потребують використання в шихті дорогих рафінованих доменних чавунів і проведення енергоємного термічного оброблення. У статті наведено дані по впливу основних структуроутворювальних факторів на механічні властивості високоміцних чавунів феритного класу. Результати цих досліджень дозволяють: визначити оптимальні концентрації хімічних елементів, підвищити інтенсивність фізико-хімічних процесів модифікування і рафінування, вибрати раціональні режими термічного оброблення, знизити собівартість литих виробів. Для реалізації такої технології використовують дешеві шихтові матеріали та високоефективні феросиліцій-магній-кальцієві модифікатори при економних енерговитратах на термічне оброблення виливків. Розроблено технологію одержання високоміцного чавуну феритного класу, що має наступні високі механічні властивості: σВ = 497–541 МПа; d = 22,0–24,7 %; КС = 134–152 Дж/см2 при твердості 156–170 НВ. Результати досліджень створюють передумови для розроблення нових конструкцій деталей сучасної техніки, заготовки яких отримують литтям, з заданими високими механічними властивостями і експлуатаційними характеристиками і високоефективних економічних технологій їх одержання. Physico-technological Institute of Metals and Alloys 2023-05-21 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/30 Metal and Casting of Ukraine; Vol. 30 No. 3 (2022): Метал та лиття України Метал та лиття України ; Том 30 № 3 (2022): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/30/30 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | високоміцний чавун ферит модифікатор механічні властивості термічне оброблення процес Бубликов, Валентин Нарівський, Анатолій Бачинський, Ю. Д. Нестерук, Олена Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| title | Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| title_alt | Development of technologies of high-plastic ductile cast irons of ferritic class obtaining |
| title_full | Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| title_fullStr | Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| title_full_unstemmed | Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| title_short | Розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| title_sort | розвиток технологій одержання високопластичних високоміцних чавунів феритного класу |
| topic | високоміцний чавун ферит модифікатор механічні властивості термічне оброблення процес |
| topic_facet | ductile cast iron ferrite modifier mechanical properties heat treatment process високоміцний чавун ферит модифікатор механічні властивості термічне оброблення процес |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/30 |
| work_keys_str_mv | AT bublikovvalentin developmentoftechnologiesofhighplasticductilecastironsofferriticclassobtaining AT narívsʹkijanatolíj developmentoftechnologiesofhighplasticductilecastironsofferriticclassobtaining AT bačinsʹkijûd developmentoftechnologiesofhighplasticductilecastironsofferriticclassobtaining AT nesterukolena developmentoftechnologiesofhighplasticductilecastironsofferriticclassobtaining AT bublikovvalentin rozvitoktehnologíjoderžannâvisokoplastičnihvisokomícnihčavunívferitnogoklasu AT narívsʹkijanatolíj rozvitoktehnologíjoderžannâvisokoplastičnihvisokomícnihčavunívferitnogoklasu AT bačinsʹkijûd rozvitoktehnologíjoderžannâvisokoplastičnihvisokomícnihčavunívferitnogoklasu AT nesterukolena rozvitoktehnologíjoderžannâvisokoplastičnihvisokomícnihčavunívferitnogoklasu |