Особливості технології виведення доменних печей із експлуатації
The aim of the work is to improve the technology of safe blowing of blast furnaces by substantiating the choice of the volume of idle coke and the dynamics of changes in the gas-blowing mode of the blowing process. To determine the directions of improving the technology of the blowing process, we co...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2025
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/300 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859472004182179840 |
|---|---|
| author | Крячко, Г.Ю. Сігарьов, Є.М. |
| author_facet | Крячко, Г.Ю. Сігарьов, Є.М. |
| author_sort | Крячко, Г.Ю. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2026-02-08T11:37:51Z |
| description | The aim of the work is to improve the technology of safe blowing of blast furnaces by substantiating the choice of the volume of idle coke and the dynamics of changes in the gas-blowing mode of the blowing process. To determine the directions of improving the technology of the blowing process, we considered the characteristic modes and formulated the tasks of these modes in accordance with the analyzed information. Consideration of the tasks that certain modes of the blowing process must solve shows that the modes of forming the charge column and the gas-blowing parameters, the study of which was focused on, are decisive in creating conditions for safe blowing of furnaces. It is shown that to determine the justified volume of idle coke, the taper of the top of the coke nozzle should be taken into account, which increases with the increase in the volume of blast furnaces. It is proposed to estimate the taper of the top of the nozzle by the ratio of the shoulder volume Vs to the furnace diameter df. It is established, firstly, that the value of the ratio Vs/df is satisfactorily correlated with the volume of idle coke from the practice of PJSC "ArcelorMittal Kryvyi Rih". Secondly, a higher level of filling the shoulders with idle coke of a powerful furnace eliminates to a certain extent the breakthrough of tuyeres gases through its layer. The feasibility of considering the gas dynamics of the blowing process as a single systemic whole with simultaneous consideration of the characteristics of the charge column, the parameters of the blast and the gas in the furnace space is shown. The leading role of increased gas pressure in establishing a safe gas-blasting mode of the blowing process is shown on examples of decommissioning industrial blast furnaces. To ensure safe blowing of the blast furnace, the resistance of the charge column to the gas flow ∆Р at the beginning of the blowing process can be equal to the excess pressure of gases on the top Pk or exceed it ∆Р ≥ Pk. In the process of reducing the height of the blowing charge column, the inverse inequality Pk > ∆Р should be maintained, which eliminates the possibility of tuyeres gas breakthrough through the charge column. The results obtained by the authors allow improving the technology of safe blowing of blast furnaces. |
| first_indexed | 2026-03-12T15:51:32Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-300 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:32Z |
| publishDate | 2025 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-3002026-02-08T11:37:51Z Features of Technology for Decommissioning Blast Furnaces Особливості технології виведення доменних печей із експлуатації Крячко, Г.Ю. Сігарьов, Є.М. Blast furnace blowing volume gas-blowing mode dynamics of changes blowing process доменна піч видувка «холостий» кокс об’єм газодуттьовий режим динаміка змін видувальний процес The aim of the work is to improve the technology of safe blowing of blast furnaces by substantiating the choice of the volume of idle coke and the dynamics of changes in the gas-blowing mode of the blowing process. To determine the directions of improving the technology of the blowing process, we considered the characteristic modes and formulated the tasks of these modes in accordance with the analyzed information. Consideration of the tasks that certain modes of the blowing process must solve shows that the modes of forming the charge column and the gas-blowing parameters, the study of which was focused on, are decisive in creating conditions for safe blowing of furnaces. It is shown that to determine the justified volume of idle coke, the taper of the top of the coke nozzle should be taken into account, which increases with the increase in the volume of blast furnaces. It is proposed to estimate the taper of the top of the nozzle by the ratio of the shoulder volume Vs to the furnace diameter df. It is established, firstly, that the value of the ratio Vs/df is satisfactorily correlated with the volume of idle coke from the practice of PJSC "ArcelorMittal Kryvyi Rih". Secondly, a higher level of filling the shoulders with idle coke of a powerful furnace eliminates to a certain extent the breakthrough of tuyeres gases through its layer. The feasibility of considering the gas dynamics of the blowing process as a single systemic whole with simultaneous consideration of the characteristics of the charge column, the parameters of the blast and the gas in the furnace space is shown. The leading role of increased gas pressure in establishing a safe gas-blasting mode of the blowing process is shown on examples of decommissioning industrial blast furnaces. To ensure safe blowing of the blast furnace, the resistance of the charge column to the gas flow ∆Р at the beginning of the blowing process can be equal to the excess pressure of gases on the top Pk or exceed it ∆Р ≥ Pk. In the process of reducing the height of the blowing charge column, the inverse inequality Pk > ∆Р should be maintained, which eliminates the possibility of tuyeres gas breakthrough through the charge column. The results obtained by the authors allow improving the technology of safe blowing of blast furnaces. Метою роботи є удосконалення технології безпечної видувки доменних печей шляхом обґрунтування вибору об’єму холостого коксу і динаміки зміни газодуттьового режиму видувального процесу. Для визначення напрямів удосконалення технології видувального процесу розглянули характерні режими і сформулювали задачі цих режимів відповідно до проаналізованої інформації. Розгляд завдань, які повинні вирішувати певні режими видувального процесу, показує, що визначальними у створенні умов безпечної видувки печей є режими формування стовпа шихти і газодуттьових параметрів, на дослідженні яких було зосереджено увагу. Показано, що для визначення обґрунтованого об’єму холостого коксу слід враховувати конусність верху коксової насадки, яка зростає зі збільшенням об’єму доменних печей. Запропоновано оцінювати конусність верху насадки відношенням об’єму заплечиків Vз до діаметра горна dг. Встановлено, по-перше, що величина відношення Vз/dг задовільно корелюється з об’ємом холостого коксу з практики ПАТ «АрселорМіттал Кривий Ріг». По-друге, більший рівень заповнення заплечиків холостим коксом потужної печі усуває у визначеній мірі прорив фурменних газів крізь його шар. Показано доцільність розгляду газодинаміки видувального процесу, як єдиного системного цілого з одночасним врахуванням характеристик стовпа шихти, параметрів дуття і газу в пічному просторі. На прикладах виведення промислових доменних печей із експлуатації показано провідну роль підвищеного тиску газу у встановленні безаварійного газодуттьового режиму видувального процесу. Для забезпечення безаварійної видувки доменної печі опір стовпа шихти газовому потоку ∆Р на початку видувального процесу може дорівнювати надмірному тиску газів на колошнику Рк або переважати його ∆Р ≥ Pк. В процесі зменшення висоти стовпа видувальної шихти слід підтримувати зворотну нерівність Pк > ∆Р, яка усуває можливість прориву фурменного газу крізь стовп шихти. Отримані авторами результати дозволяють удосконалити технологію безпечної видувки доменних печей.  Physico-technological Institute of Metals and Alloys 2025-12-30 Article Article application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/300 10.15407/steelcast2025.03-04.020 Metal and Casting of Ukraine; Vol. 33 No. 3-4 (2025): Metal and Casting of Ukraine; 20-27 Метал та лиття України ; Том 33 № 3-4 (2025): Метал та лиття України; 20-27 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/300/295 Авторське право (c) 2025 Г.Ю. Крячко, Є.М. Сігарьов https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | доменна піч видувка «холостий» кокс об’єм газодуттьовий режим динаміка змін видувальний процес Крячко, Г.Ю. Сігарьов, Є.М. Особливості технології виведення доменних печей із експлуатації |
| title | Особливості технології виведення доменних печей із експлуатації |
| title_alt | Features of Technology for Decommissioning Blast Furnaces |
| title_full | Особливості технології виведення доменних печей із експлуатації |
| title_fullStr | Особливості технології виведення доменних печей із експлуатації |
| title_full_unstemmed | Особливості технології виведення доменних печей із експлуатації |
| title_short | Особливості технології виведення доменних печей із експлуатації |
| title_sort | особливості технології виведення доменних печей із експлуатації |
| topic | доменна піч видувка «холостий» кокс об’єм газодуттьовий режим динаміка змін видувальний процес |
| topic_facet | Blast furnace blowing volume gas-blowing mode dynamics of changes blowing process доменна піч видувка «холостий» кокс об’єм газодуттьовий режим динаміка змін видувальний процес |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/300 |
| work_keys_str_mv | AT krâčkogû featuresoftechnologyfordecommissioningblastfurnaces AT sígarʹovêm featuresoftechnologyfordecommissioningblastfurnaces AT krâčkogû osoblivostítehnologíívivedennâdomennihpečejízekspluatacíí AT sígarʹovêm osoblivostítehnologíívivedennâdomennihpečejízekspluatacíí |