Особливості одержання литих модулів для побудови захисних споруд
The article is devoted to the current issues related to the development of modular protective structures. The article considers the types of engineering structures designed to protect personnel, control points and material and technical means from the effects of weapons. Special attention is paid to...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2025
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/309 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859472006391529472 |
|---|---|
| author | Шинський, О.Й. Шалевська, І.А. Калюжний, П.Б. Квасницька, Ю.Г. Нейма, О.В. Шалевський, А.В. |
| author_facet | Шинський, О.Й. Шалевська, І.А. Калюжний, П.Б. Квасницька, Ю.Г. Нейма, О.В. Шалевський, А.В. |
| author_sort | Шинський, О.Й. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2026-02-08T11:37:51Z |
| description | The article is devoted to the current issues related to the development of modular protective structures. The article considers the types of engineering structures designed to protect personnel, control points and material and technical means from the effects of weapons. Special attention is paid to prefabricated structures for the rapid construction of shelters. A number of shortcomings in the complexity of production, installation, duration of the production cycle in the manufacture of existing protective structures, or their insufficient stability, were identified. The prospects of using casting technologies for obtaining modules for the rapid construction of protective structures are shown.
The Physico-technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine has developed the principles of constructing modular protective structures based on cast structures. Cast modules have been designed, which structurally consist of a metal shell and a refractory non-metallic filler and have a surface that increases their protective characteristics and reduces the metal content of products. For the shell of the modules, economical alloyed carbon steels and appropriate heat treatment regimes have been developed to ensure the required level of physical and mechanical properties. The use of non-metallic fillers in cast metal structures allows for the production of modules with a nominal density that is 1.5 times lower than that of reinforced concrete.
As a result of the research, a comprehensive technological scheme for the manufacture of cast lightweight steel modules based on gasified models was developed. Laboratory and pilot-production tests were conducted, and pilot modules were manufactured. It was established that the shelter made of cast lightweight steel modules in terms of protective characteristics — in terms of maintaining strength, integrity, and preventing significant movements — meets the requirements of storage facilities in accordance with regulatory documentation. |
| first_indexed | 2026-03-12T15:51:34Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-309 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:34Z |
| publishDate | 2025 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-3092026-02-08T11:37:51Z Features of Obtaining Cast Modules for the Construction of Protective Structures Особливості одержання литих модулів для побудови захисних споруд Шинський, О.Й. Шалевська, І.А. Калюжний, П.Б. Квасницька, Ю.Г. Нейма, О.В. Шалевський, А.В. Casting protective structure thin-walled cast modules filler lost foam casting виливок захисна споруда тонкостінні литі модулі наповнювач лиття за моделями, що газифікуються The article is devoted to the current issues related to the development of modular protective structures. The article considers the types of engineering structures designed to protect personnel, control points and material and technical means from the effects of weapons. Special attention is paid to prefabricated structures for the rapid construction of shelters. A number of shortcomings in the complexity of production, installation, duration of the production cycle in the manufacture of existing protective structures, or their insufficient stability, were identified. The prospects of using casting technologies for obtaining modules for the rapid construction of protective structures are shown. The Physico-technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine has developed the principles of constructing modular protective structures based on cast structures. Cast modules have been designed, which structurally consist of a metal shell and a refractory non-metallic filler and have a surface that increases their protective characteristics and reduces the metal content of products. For the shell of the modules, economical alloyed carbon steels and appropriate heat treatment regimes have been developed to ensure the required level of physical and mechanical properties. The use of non-metallic fillers in cast metal structures allows for the production of modules with a nominal density that is 1.5 times lower than that of reinforced concrete. As a result of the research, a comprehensive technological scheme for the manufacture of cast lightweight steel modules based on gasified models was developed. Laboratory and pilot-production tests were conducted, and pilot modules were manufactured. It was established that the shelter made of cast lightweight steel modules in terms of protective characteristics — in terms of maintaining strength, integrity, and preventing significant movements — meets the requirements of storage facilities in accordance with regulatory documentation. Статтю присвячено актуальній проблематиці, яка стосується розроблення модульних захисних споруд. У статті розглянуто різновиди інженерних споруд, призначених для забезпечення захисту особового складу, пунктів управління та матеріально-технічних засобів від дії засобів ураження. Окрему увагу приділено збірним спорудам для швидкої побудови укриттів. Було визначено ряд недоліків у складності виробництва, монтажу, тривалості виробничого циклу при виготовленні існуючих захисних споруд, або ж недостатній їх стійкості. Показано перспективність застосування ливарних технологій для одержання модулів для швидкісної побудови захисних споруд. У Фізико-технологічному інституті металів та сплавів НАН України розроблено принципи побудови модульних захисних споруд на основі литих конструкцій. Спроєктовано литі модулі, які конструктивно складаються з металевої оболонки та вогнетривкого неметалевого наповнювача і мають поверхню, що підвищує їх захисні характеристики та зменшує металоємність виробів. Для оболонки модулів розроблено економно леговані вуглецеві сталі та відповідні режими термічного оброблення для забезпечення необхідного рівня фізико-механічних властивостей. Застосування неметалевих наповнювачів у литих металевих конструкціях дозволяє одержати модулі з умовною щільністю, яка у 1,5 рази нижча ніж у залізобетону. В результаті проведених досліджень було розроблено комплексну технологічну схему виготовлення литих легковагих сталевих модулів за моделями, що газифікуються. Було проведено лабораторні та дослідно-виробничі випробування та виготовлено дослідні модулі. Встановлено, що укриття з литих легковагих сталевих модулів за захисними характеристиками — з точки зору збереження міцності, цілісності та запобігання значним переміщенням — відповідає вимогам сховищ згідно з нормативною документацією. Physico-technological Institute of Metals and Alloys 2025-12-30 Article Article application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/309 10.15407/steelcast2025.03-04.106 Metal and Casting of Ukraine; Vol. 33 No. 3-4 (2025): Metal and Casting of Ukraine; 106-113 Метал та лиття України ; Том 33 № 3-4 (2025): Метал та лиття України; 106-113 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/309/303 Авторське право (c) 2025 О.Й. Шинський, І.А. Шалевська, П.Б. Калюжний, Ю.Г. Квасницька, О.В. Нейма, А.В. Шалевський https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | виливок захисна споруда тонкостінні литі модулі наповнювач лиття за моделями що газифікуються Шинський, О.Й. Шалевська, І.А. Калюжний, П.Б. Квасницька, Ю.Г. Нейма, О.В. Шалевський, А.В. Особливості одержання литих модулів для побудови захисних споруд |
| title | Особливості одержання литих модулів для побудови захисних споруд |
| title_alt | Features of Obtaining Cast Modules for the Construction of Protective Structures |
| title_full | Особливості одержання литих модулів для побудови захисних споруд |
| title_fullStr | Особливості одержання литих модулів для побудови захисних споруд |
| title_full_unstemmed | Особливості одержання литих модулів для побудови захисних споруд |
| title_short | Особливості одержання литих модулів для побудови захисних споруд |
| title_sort | особливості одержання литих модулів для побудови захисних споруд |
| topic | виливок захисна споруда тонкостінні литі модулі наповнювач лиття за моделями що газифікуються |
| topic_facet | Casting protective structure thin-walled cast modules filler lost foam casting виливок захисна споруда тонкостінні литі модулі наповнювач лиття за моделями що газифікуються |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/309 |
| work_keys_str_mv | AT šinsʹkijoj featuresofobtainingcastmodulesfortheconstructionofprotectivestructures AT šalevsʹkaía featuresofobtainingcastmodulesfortheconstructionofprotectivestructures AT kalûžnijpb featuresofobtainingcastmodulesfortheconstructionofprotectivestructures AT kvasnicʹkaûg featuresofobtainingcastmodulesfortheconstructionofprotectivestructures AT nejmaov featuresofobtainingcastmodulesfortheconstructionofprotectivestructures AT šalevsʹkijav featuresofobtainingcastmodulesfortheconstructionofprotectivestructures AT šinsʹkijoj osoblivostíoderžannâlitihmodulívdlâpobudovizahisnihsporud AT šalevsʹkaía osoblivostíoderžannâlitihmodulívdlâpobudovizahisnihsporud AT kalûžnijpb osoblivostíoderžannâlitihmodulívdlâpobudovizahisnihsporud AT kvasnicʹkaûg osoblivostíoderžannâlitihmodulívdlâpobudovizahisnihsporud AT nejmaov osoblivostíoderžannâlitihmodulívdlâpobudovizahisnihsporud AT šalevsʹkijav osoblivostíoderžannâlitihmodulívdlâpobudovizahisnihsporud |