Десульфурація сталі: сучасні технології, тенденції та перспективи
Today, the process of sulfur removal includes four stages: in the blast furnace (usually up to 90 % S is removed), during the pre-treatment of hot metal, in the steelmaking unit (oxygen converter (BOF) or electric steelmaking furnace) and out-offurnace treatment. The process of sulfur release (metal...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/5 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471921370890240 |
|---|---|
| author | Воденнікова, Оксана Воденнікова, Лариса |
| author_facet | Воденнікова, Оксана Воденнікова, Лариса |
| author_sort | Воденнікова, Оксана |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-05-18T08:44:57Z |
| description | Today, the process of sulfur removal includes four stages: in the blast furnace (usually up to 90 % S is removed), during the pre-treatment of hot metal, in the steelmaking unit (oxygen converter (BOF) or electric steelmaking furnace) and out-offurnace treatment. The process of sulfur release (metal desulfurization) is the main condition for obtaining quality steel, which depends on the chemical composition of the slag, its holding time in the ladle, the degree of oxidation of the metal, mixing conditions of steel in the ladle and additional technological operations. The paper presents the world's best-known methods of cast iron desulfurization: Kanbara Reactor process (only lime is used as desulfurizing reagent), Ukraina Desmag process (magnesium monoinjection) and Co-injection process (co-injection process of magnesium and lime or calcium carbide). The evaluation of the efficiency of various metallurgical processes in terms of the degree of desulfurization of the metal and the ability to achieve the final sulfur content in the metal is less than 0.001 %. A comparative analysis of modern technologies of out-of-furnace desulfurization of cast iron is given and it is established that the degree of desulfurization within 90–99 % is achieved by injection of magnesium-based mixture, lime-magnesium-based mixture, and deep arc recovery technology. The inefficiency of using zinc oxide (ZnO) as a desulfurizing agent in comparison with other desulfurizers (including fluidized CaO, industrial CaO, CaC2 powder, Mg granules and mixtures of industrial CaO and Mg) has been shown. The modern view on the process of steel desulfurization in the conditions of steel production in different countries of the world is analyzed. In particular, the technological aspects of desulfurization in the oxygen-converter shops of PJSC Severstal and PJSC Magnitogorsk Iron & Steel Works are given. Technological possibilities of steel desulfurization in the process of secondary steelmaking in the conditions of JSC Moldova Steel Works and OJSC Byelorussian Steel Works are considered. The study of the kinetics of the desulfurization process of 20ГЛ steel in the conditions of JSC Tashkent Mechanical Plant is analyzed. The regularities of the desulfurization process on the example of research during the smelting of oxygen-converter steel in the conditions of the Isdemir are given. |
| first_indexed | 2026-03-12T15:50:13Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-5 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:13Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-52023-05-18T08:44:57Z Desulfurization of steel: modern technologies, trends and prospects Десульфурація сталі: сучасні технології, тенденції та перспективи Воденнікова, Оксана Воденнікова, Лариса steel desulfurization desulfurizer degree of desulfurization cast iron desulfurization plant secondary steelmaking ladle furnace десульфурація сталі десульфуратор ступінь десульфурації установка десульфурації чавуну позапічна обробка сталі установка «піч-ківш» Today, the process of sulfur removal includes four stages: in the blast furnace (usually up to 90 % S is removed), during the pre-treatment of hot metal, in the steelmaking unit (oxygen converter (BOF) or electric steelmaking furnace) and out-offurnace treatment. The process of sulfur release (metal desulfurization) is the main condition for obtaining quality steel, which depends on the chemical composition of the slag, its holding time in the ladle, the degree of oxidation of the metal, mixing conditions of steel in the ladle and additional technological operations. The paper presents the world's best-known methods of cast iron desulfurization: Kanbara Reactor process (only lime is used as desulfurizing reagent), Ukraina Desmag process (magnesium monoinjection) and Co-injection process (co-injection process of magnesium and lime or calcium carbide). The evaluation of the efficiency of various metallurgical processes in terms of the degree of desulfurization of the metal and the ability to achieve the final sulfur content in the metal is less than 0.001 %. A comparative analysis of modern technologies of out-of-furnace desulfurization of cast iron is given and it is established that the degree of desulfurization within 90–99 % is achieved by injection of magnesium-based mixture, lime-magnesium-based mixture, and deep arc recovery technology. The inefficiency of using zinc oxide (ZnO) as a desulfurizing agent in comparison with other desulfurizers (including fluidized CaO, industrial CaO, CaC2 powder, Mg granules and mixtures of industrial CaO and Mg) has been shown. The modern view on the process of steel desulfurization in the conditions of steel production in different countries of the world is analyzed. In particular, the technological aspects of desulfurization in the oxygen-converter shops of PJSC Severstal and PJSC Magnitogorsk Iron & Steel Works are given. Technological possibilities of steel desulfurization in the process of secondary steelmaking in the conditions of JSC Moldova Steel Works and OJSC Byelorussian Steel Works are considered. The study of the kinetics of the desulfurization process of 20ГЛ steel in the conditions of JSC Tashkent Mechanical Plant is analyzed. The regularities of the desulfurization process on the example of research during the smelting of oxygen-converter steel in the conditions of the Isdemir are given. На сьогодні процес видалення сірки включає чотири етапи: у доменній печі (зазвичай видаляється до 90 % S), під час попередньої обробки гарячого металу, у сталеплавильному агрегаті (кисневому конвертері або електросталеплавильній печі) та позапічній обробці. Процес виділення сірки (десульфурація металу) – це головна умова отримання якісної сталі, який залежить від хімічного складу шлаку, часу його витримки в ковші, ступеня окислення металу, умов перемішування сталі в ковші та додаткових технологічних операцій обробки металу. У роботі представлено найбільш відомі світові способи десульфурації чавуну: процес «Kanbara Reactor» (в якості реагент-десульфуратора використовується тільки вапно), процес «Ukraina Desmag» (моноінжекція магнію) та процес «Co-injection» (процес спільної інжекції магнію та вапна або карбіду кальцію). Дано оцінку ефективності різних металургійних процесів з точки зору ступеня десульфурації металу та можливості досягати кінцевого вмісту сірки в металі менше 0,001 %. Наведено порівняльний аналіз сучасних технологій позапічної десульфурації чавуну та встановлено, що ступінь десульфурації в межах 90–99 % досягається інжєкцією (вдуванням) суміші на основі магнію, суміші на основі вапна та магнію, а також використанням технології глибинного дугового відновлення. Показано неефективність використання в якості реагент-десульфуратора оксиду цинку (ZnO) в порівнянні з іншими десульфураторами (зокрема флюідизованим CaO, промисловим CaO, порошком CaC2, гранулами Mg та суміші промислового CaO та Mg). Проаналізовано сучасний погляд на процес десульфурації сталі в умовах сталеплавильного виробництва різник країн світу. Зокрема, наведено технологічні аспекти десульфурації в киснево-конвертерних цехах ПАТ «Северсталь» та ПАТ «Магнітогорський металургійний комбінат». Розглянуто технологічні можливості десульфурації сталі в процесі позапічної обробки сталі в умовах ВАТ «Молдавський металургійний завод» та ВАТ «Білоруський металургійний завод». Проаналізовано дослідження кінетики процесу десульфурації сталі 20ГЛ в умовах АТ «Ташкентський механічний завод». Наведено закономірності процесу десульфурації на прикладі досліджень під час виплавки киснево-конвертерної сталі в умовах Іскендерунського металургійного комбінату. Physico-technological Institute of Metals and Alloys 2023-05-18 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/5 Metal and Casting of Ukraine; Vol. 30 No. 1 (2022): Метал та лиття України Метал та лиття України ; Том 30 № 1 (2022): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/5/5 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | десульфурація сталі десульфуратор ступінь десульфурації установка десульфурації чавуну позапічна обробка сталі установка «піч-ківш» Воденнікова, Оксана Воденнікова, Лариса Десульфурація сталі: сучасні технології, тенденції та перспективи |
| title | Десульфурація сталі: сучасні технології, тенденції та перспективи |
| title_alt | Desulfurization of steel: modern technologies, trends and prospects |
| title_full | Десульфурація сталі: сучасні технології, тенденції та перспективи |
| title_fullStr | Десульфурація сталі: сучасні технології, тенденції та перспективи |
| title_full_unstemmed | Десульфурація сталі: сучасні технології, тенденції та перспективи |
| title_short | Десульфурація сталі: сучасні технології, тенденції та перспективи |
| title_sort | десульфурація сталі: сучасні технології, тенденції та перспективи |
| topic | десульфурація сталі десульфуратор ступінь десульфурації установка десульфурації чавуну позапічна обробка сталі установка «піч-ківш» |
| topic_facet | steel desulfurization desulfurizer degree of desulfurization cast iron desulfurization plant secondary steelmaking ladle furnace десульфурація сталі десульфуратор ступінь десульфурації установка десульфурації чавуну позапічна обробка сталі установка «піч-ківш» |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/5 |
| work_keys_str_mv | AT vodenníkovaoksana desulfurizationofsteelmoderntechnologiestrendsandprospects AT vodenníkovalarisa desulfurizationofsteelmoderntechnologiestrendsandprospects AT vodenníkovaoksana desulʹfuracíâstalísučasnítehnologíítendencíítaperspektivi AT vodenníkovalarisa desulʹfuracíâstalísučasnítehnologíítendencíítaperspektivi |