Знешкодження газів, які виділяються при литті за моделями, що газифікуються
The priority areas of innovation include the widespread use of new technologies for cleaner production and environmental protection. The work is devoted to the technology of Lost Foam casting process (LFC) mainly in vacuum sand molds. Improvements are designed for the manufacture of mainly medium or...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/62 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471921344675840 |
|---|---|
| author | Дорошенко, Володимир |
| author_facet | Дорошенко, Володимир |
| author_sort | Дорошенко, Володимир |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-05-25T09:59:00Z |
| description | The priority areas of innovation include the widespread use of new technologies for cleaner production and environmental protection. The work is devoted to the technology of Lost Foam casting process (LFC) mainly in vacuum sand molds. Improvements are designed for the manufacture of mainly medium or large castings on single polymer patterns, which are oxidized with the neutralization of gases in sand molds from bulk refractories. For stable combustion of gases in different foundry systems in vacuum molds by removing from the movable gap between the liquid metal and the material of the pattern of gasification products on the upper surface of the mold and burning these gaseous products additionally used a tube through which air flow was fed into this gap. The oxygen of the supplied air partially oxidizes the vapor-gas phase of the pattern's hydrocarbons, and the nitrogen of the air expels the gases before leaving the combustion mold on its surface. At the exit of the mold, the gas burns with an odorless torch with complete neutralization. Combustion of gases outside the mold significantly reduces the power and energy consumption of exhaust ventilation and significantly improves the working conditions in the foundry and has the environmental effect of reducing environmental pollution. Production of exhaust ducts in the pattern by burning is possible for any type of gutter systems. The removal of gas through the channels expands the use of patterns with high-volume density polymers, extrusion polymer made on 3D milling machines, as well as using 3D printing. Examples of patterns for casting with neutralization of gases from gasification of the model are given. In subsequent studies, calculations of air flow in the form are carried out taking into account the thermal balance of oxidation of the products of the model at different oxygen concentrations in the cavity of the form, as well as the creation of an analytical model of gasdynamics of the process for the technical and economic substantiation of recommendations for the casting of different types of castings, species and the temperature of their poured metal, as well as the choice of relevant equipment and instrument. |
| first_indexed | 2026-03-12T15:50:13Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-62 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:13Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-622023-05-25T09:59:00Z Disposal of gases emitted during Lost Foam casting process Знешкодження газів, які виділяються при литті за моделями, що газифікуються Дорошенко, Володимир foundry processes casting according to gasified patterns thermal destruction expanded polystyrene neutralization of gases harmful gases burning of channels gas removal ливарні процеси лиття за газифікованими моделями термодеструкція пінополістирол нейтралізація газів шкідливі гази пропалювання каналів газовивід The priority areas of innovation include the widespread use of new technologies for cleaner production and environmental protection. The work is devoted to the technology of Lost Foam casting process (LFC) mainly in vacuum sand molds. Improvements are designed for the manufacture of mainly medium or large castings on single polymer patterns, which are oxidized with the neutralization of gases in sand molds from bulk refractories. For stable combustion of gases in different foundry systems in vacuum molds by removing from the movable gap between the liquid metal and the material of the pattern of gasification products on the upper surface of the mold and burning these gaseous products additionally used a tube through which air flow was fed into this gap. The oxygen of the supplied air partially oxidizes the vapor-gas phase of the pattern's hydrocarbons, and the nitrogen of the air expels the gases before leaving the combustion mold on its surface. At the exit of the mold, the gas burns with an odorless torch with complete neutralization. Combustion of gases outside the mold significantly reduces the power and energy consumption of exhaust ventilation and significantly improves the working conditions in the foundry and has the environmental effect of reducing environmental pollution. Production of exhaust ducts in the pattern by burning is possible for any type of gutter systems. The removal of gas through the channels expands the use of patterns with high-volume density polymers, extrusion polymer made on 3D milling machines, as well as using 3D printing. Examples of patterns for casting with neutralization of gases from gasification of the model are given. In subsequent studies, calculations of air flow in the form are carried out taking into account the thermal balance of oxidation of the products of the model at different oxygen concentrations in the cavity of the form, as well as the creation of an analytical model of gasdynamics of the process for the technical and economic substantiation of recommendations for the casting of different types of castings, species and the temperature of their poured metal, as well as the choice of relevant equipment and instrument. До пріоритетних напрямів інноваційної діяльності належить широке застосування нових технологій більш чистого виробництва та охорони навколишнього природного середовища. Роботу присвячено технології лиття металу за газифікованими моделями (ЛГМ) переважно в піщаних формах, що вакуумуються. Удосконалення призначені для виготовлення переважно середніх чи крупних виливків за разовими полімерними моделями, що окислюються з нейтралізацією газів у піщаних формах з сипких вогнетривів. Для стабільного спалювання газів при різних ливникових системах у вакуумованих формах методом виведення із рухомого зазору між рідким металом і матеріалом моделі продуктів газифікації на верхню поверхню форми та спалювання цих газових продуктів додатково застосували трубку, по якій подавали у цей зазор потік повітря. Кисень повітря, що подається, частково окислює парогазову фазу вуглеводнів моделі, а азот повітря витискує гази до виходу з форми для спалювання на її поверхні. На виході з форми газ горить факелом без запаху з повним знешкодженням. Згоряння газів за межами форми значно знижує потужності і енергозатрати витяжної вентиляції і суттєво покращує умови праці в ливарному цеху та має екологічний ефект зниження забруднення навколишнього середовища. Виготовлення газовідвідних каналів у моделі методом пропалювання можливе для будь-яких типів ливникових систем. Видалення газу по каналах розширює застосування моделей з пінополімерами підвищеної об’ємної густини, з екструзійного полімеру, виготовлених на 3D-фрезерах, а також за допомогою 3D-друку. Наведено приклади моделей для лиття з нейтралізацією газів від газифікації моделі. В подальших дослідженнях проводяться розрахунки витрат повітря, що нагнітається у форму, з урахуванням теплового балансу окислення продуктів моделі при різній концентрації кисню в порожнині форми, а також створення аналітичної моделі газодинаміки процесу для техніко-економічного обґрунтування рекомендацій щодо лиття різних типів конструкцій виливків, виду і температури їх металу, що заливається, а також вибору відповідного оснащення та інструменту. Physico-technological Institute of Metals and Alloys 2023-05-25 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/62 Metal and Casting of Ukraine; Vol. 29 No. 2 (2021): Metal and Casting of Ukraine Метал та лиття України ; Том 29 № 2 (2021): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/62/62 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | ливарні процеси лиття за газифікованими моделями термодеструкція пінополістирол нейтралізація газів шкідливі гази пропалювання каналів газовивід Дорошенко, Володимир Знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| title | Знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| title_alt | Disposal of gases emitted during Lost Foam casting process |
| title_full | Знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| title_fullStr | Знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| title_full_unstemmed | Знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| title_short | Знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| title_sort | знешкодження газів, які виділяються при литті за моделями, що газифікуються |
| topic | ливарні процеси лиття за газифікованими моделями термодеструкція пінополістирол нейтралізація газів шкідливі гази пропалювання каналів газовивід |
| topic_facet | foundry processes casting according to gasified patterns thermal destruction expanded polystyrene neutralization of gases harmful gases burning of channels gas removal ливарні процеси лиття за газифікованими моделями термодеструкція пінополістирол нейтралізація газів шкідливі гази пропалювання каналів газовивід |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/62 |
| work_keys_str_mv | AT dorošenkovolodimir disposalofgasesemittedduringlostfoamcastingprocess AT dorošenkovolodimir zneškodžennâgazívâkívidílâûtʹsâprilittízamodelâmiŝogazifíkuûtʹsâ |