Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків
The purpose of this work is to study the effect of sand-liquid glass molds, structured by the method of steam-microwave hardening (SMH-process), on the burn-in and roughness of the casting. The studies used molds prepared by the Cold-boxamin-process, Resol-CO2-process, CO2-process and SMH-process, w...
Saved in:
| Date: | 2023 |
|---|---|
| Main Authors: | , , |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
Physico-technological Institute of Metals and Alloys
2023
|
| Subjects: | |
| Online Access: | https://www.metalsandcasting.com/index.php/mcu/article/view/74 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471926348480512 |
|---|---|
| author | Солоненко, Людмила Реп'ях, Сергій Білий, Олександр |
| author_facet | Солоненко, Людмила Реп'ях, Сергій Білий, Олександр |
| author_sort | Солоненко, Людмила |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-05-27T17:08:59Z |
| description | The purpose of this work is to study the effect of sand-liquid glass molds, structured by the method of steam-microwave hardening (SMH-process), on the burn-in and roughness of the casting. The studies used molds prepared by the Cold-boxamin-process, Resol-CO2-process, CO2-process and SMH-process, which were filled with 30L steel. Samples of castings were cast in molds made by the SMH-process from steels 30L, 20Kh27N18S2L, gray cast iron SCh20, bronzes BrA9Zh3L, BrO5Ts5S5, BrO4Ts4S17, and aluminum alloy AL2. Overheating of all alloys above the liquidus temperature was 120 ± 7 °C. The microstructure of 30L steel samples was investigated using an MBS-10 optical microscope before and after their etching castings made in shell molds. Considering that the SMH-process is environmentally safer than the Coldbox-amin, Resol-CO2, more efficient and economical than the Cold-box-amin, Resol-CO2, CO2-process, then this method of making molds and cores, from among of the above methods, is the most promising for the manufacture of medium and small castings for general machine-building purposes from iron-carbon and low-melting non-ferrous alloys. Proceeding from the foregoing, prospective studies should be aimed at establishing the regularities of the influence of a number of basic parameters of clad liquid glass mixtures and the conditions for the manufacture of molds and cores by the SMH method on the quality of casting and optimization of the conditions for structuring such mixtures in the conditions of casting production in modern foundries. |
| first_indexed | 2026-03-12T15:50:17Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-74 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:17Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-742023-05-27T17:08:59Z Influence of sand-sodium-silicate molds structured by steam-microwave solidification on castings surface burn-in and roughness Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків Солоненко, Людмила Реп'ях, Сергій Білий, Олександр casting surface roughness burn-in sand water glass cladding steam-microwave hardening виливок шорсткість поверхні пригар пісок рідке скло плакування паро-мікрохвильове затвердіння The purpose of this work is to study the effect of sand-liquid glass molds, structured by the method of steam-microwave hardening (SMH-process), on the burn-in and roughness of the casting. The studies used molds prepared by the Cold-boxamin-process, Resol-CO2-process, CO2-process and SMH-process, which were filled with 30L steel. Samples of castings were cast in molds made by the SMH-process from steels 30L, 20Kh27N18S2L, gray cast iron SCh20, bronzes BrA9Zh3L, BrO5Ts5S5, BrO4Ts4S17, and aluminum alloy AL2. Overheating of all alloys above the liquidus temperature was 120 ± 7 °C. The microstructure of 30L steel samples was investigated using an MBS-10 optical microscope before and after their etching castings made in shell molds. Considering that the SMH-process is environmentally safer than the Coldbox-amin, Resol-CO2, more efficient and economical than the Cold-box-amin, Resol-CO2, CO2-process, then this method of making molds and cores, from among of the above methods, is the most promising for the manufacture of medium and small castings for general machine-building purposes from iron-carbon and low-melting non-ferrous alloys. Proceeding from the foregoing, prospective studies should be aimed at establishing the regularities of the influence of a number of basic parameters of clad liquid glass mixtures and the conditions for the manufacture of molds and cores by the SMH method on the quality of casting and optimization of the conditions for structuring such mixtures in the conditions of casting production in modern foundries. Метою цієї роботи є вивчення впливу піщано-рідкоскляних форм, структурованих за способом паро-мікрохвильового затвердіння (ПМЗ-процес), на пригар і шорсткість виливків. У дослідженнях використовували форми, що були виготовлені за Сold-box-amin-процесом, Resol-CO2-процесом, СО2-процесом та ПМЗ-процесом, які заливали сталлю 30Л. Зразки виливків зі сталей 30Л, 20Х27Н18С2Л, сірого чавуну СЧ20, бронз БрА9Ж3Л, БрО5Ц5С5, БрО4Ц4С17 і алюмінієвого сплаву АЛ2 відливали в форми, що виготовлені за ПМЗ-процесом. Перегрів всіх сплавів над температурою ліквідус при заливці становив 120 ± 7 °C. Мікроструктуру зразків сталі 30Л досліджували на оптичному мікроскопі МБС-10 до і після їх травлення ніталем. Параметри шорсткості визначали на профілометрі в комплекті з інформаційно-обчислювальним комплексом мод. 170622. Встановлено, що якість поверхні виливків, виготовлених за ПМЗ-процесом, не поступається якості поверхні виливків, виготовлених в формах за Сold-box-amin, Resol-CO2, СО2-процесами, і для виливків зі сплаву АЛ2 знаходиться на рівні якості (по чистоті поверхні) з виливками, що виготовляють в оболонкових формах. Якщо врахувати, що ПМЗ-процес екологічно безпечніший, ніж Сold-box-amin, Resol-CO2-процес, і економічніший, ніж Сold-boxamin, Resol-CO2 і СО2-процес, то цей спосіб виготовлення форм і стрижнів, з числа перерахованих способів, при наявності відповідного обладнання та оснащення, є найбільш перспективним для виготовлення середнього і дрібного литва загальномашинобудівного призначення із залізовуглецевих і легкоплавких кольорових сплавів. Виходячи з викладеного, перспективні дослідження повинні бути спрямовані на встановлення закономірностей впливу ряду основних параметрів плакованих рідкоскляних сумішей і умов виготовлення форм і стрижнів за способом ПМЗ на якість литва та оптимізацію умов структурування подібних сумішей в умовах виробництва виливків в сучасних ливарних цехах. Physico-technological Institute of Metals and Alloys 2023-05-27 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/74 Metal and Casting of Ukraine; Vol. 29 No. 3 (2021): Metal and Casting of Ukraine Метал та лиття України ; Том 29 № 3 (2021): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/74/74 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | виливок шорсткість поверхні пригар пісок рідке скло плакування паро-мікрохвильове затвердіння Солоненко, Людмила Реп'ях, Сергій Білий, Олександр Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| title | Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| title_alt | Influence of sand-sodium-silicate molds structured by steam-microwave solidification on castings surface burn-in and roughness |
| title_full | Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| title_fullStr | Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| title_full_unstemmed | Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| title_short | Вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| title_sort | вплив піщано-рідкоскляних форм, структурованих паромікрохвильовим затвердінням, на пригар і шорсткість поверхні виливків |
| topic | виливок шорсткість поверхні пригар пісок рідке скло плакування паро-мікрохвильове затвердіння |
| topic_facet | casting surface roughness burn-in sand water glass cladding steam-microwave hardening виливок шорсткість поверхні пригар пісок рідке скло плакування паро-мікрохвильове затвердіння |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/74 |
| work_keys_str_mv | AT solonenkolûdmila influenceofsandsodiumsilicatemoldsstructuredbysteammicrowavesolidificationoncastingssurfaceburninandroughness AT repâhsergíj influenceofsandsodiumsilicatemoldsstructuredbysteammicrowavesolidificationoncastingssurfaceburninandroughness AT bílijoleksandr influenceofsandsodiumsilicatemoldsstructuredbysteammicrowavesolidificationoncastingssurfaceburninandroughness AT solonenkolûdmila vplivpíŝanorídkosklânihformstrukturovanihparomíkrohvilʹovimzatverdínnâmnaprigaríšorstkístʹpoverhnívilivkív AT repâhsergíj vplivpíŝanorídkosklânihformstrukturovanihparomíkrohvilʹovimzatverdínnâmnaprigaríšorstkístʹpoverhnívilivkív AT bílijoleksandr vplivpíŝanorídkosklânihformstrukturovanihparomíkrohvilʹovimzatverdínnâmnaprigaríšorstkístʹpoverhnívilivkív |