Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів
Pipeline transport systems are dangerous man-made objects. This determines the high level of requirements for pipes for construction and repair of pipelines. Ensuring such a high level of technical requirements may be possible in productions with a full technological cycle and on specialized equipme...
Saved in:
| Date: | 2023 |
|---|---|
| Main Authors: | , |
| Format: | Article |
| Language: | Ukrainian |
| Published: |
Physico-technological Institute of Metals and Alloys
2023
|
| Subjects: | |
| Online Access: | https://www.metalsandcasting.com/index.php/mcu/article/view/78 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471929883230208 |
|---|---|
| author | Проців, Володимир Григоренко, Володимир |
| author_facet | Проців, Володимир Григоренко, Володимир |
| author_sort | Проців, Володимир |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-07T15:21:35Z |
| description | Pipeline transport systems are dangerous man-made objects. This determines the high level of requirements for pipes for construction and repair of pipelines. Ensuring such a high level of technical requirements may be possible in productions with a full technological cycle and on specialized equipment. After forming the pipes from the sheet and welding the side ends of the sheet residual stresses that reduce the reliability of the pipelines accumulate in the metal. To ensure the regulated geometrical parameters of pipes and the complex of mechanical properties of metal pipes at modern specialized pipe enterprises around the world, a calibration-expansion operation is performed on hydromechanical expanders.
Expanders are designed to calibrate pipes by outer diameter and fatigue number at the ends of the pipe, to reduce the curvature of the finished pipes, leveling the final stresses in the main metal of the pipe, additional testing of weld quality, preliminary short-term testing of base metal at tangential stresses above the flow limits. Characteristic features and purposes of using the expansion process are as follows:
application, if the pipe is not subject to further normalization, hardening and tempering or further heat treatment;
execution only on pipes, where there is a continuous technological weld;
increase in the outer diameter of the pipe by 0.3–1.5 percent within the limits set in the regulatory documentation;
stepwise increase in the diameter of the pipe along the entire length of the pipe;
the location of the weld in the recess of the segment of the expander so that it is not affected by radially directed forces applied to the base metal of the pipe;
the ability to process the formed pipes with a weld with a wall thickness of up to 50 mm;
execution of the expansion process for each pipe;
use in the production of main pipes for the transportation of gas and oil.
|
| first_indexed | 2026-03-12T15:50:20Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-78 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:20Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-782023-06-07T15:21:35Z Features of the expansion process in the technology of production of large diameter pipes for main oil and gas pipelines Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів Проців, Володимир Григоренко, Володимир main pipelines large diameter pipes forming welding expansion residual stresses technological equipment normative documentation reliability elastic and plastic deformation increase of pipe diameter магістральні трубопроводи труби великого діаметра формування зварювання експандування залишкові напруження технологічне обладнання нормативна документація надійність пружна і пластична деформація збільшення діаметра труби Pipeline transport systems are dangerous man-made objects. This determines the high level of requirements for pipes for construction and repair of pipelines. Ensuring such a high level of technical requirements may be possible in productions with a full technological cycle and on specialized equipment. After forming the pipes from the sheet and welding the side ends of the sheet residual stresses that reduce the reliability of the pipelines accumulate in the metal. To ensure the regulated geometrical parameters of pipes and the complex of mechanical properties of metal pipes at modern specialized pipe enterprises around the world, a calibration-expansion operation is performed on hydromechanical expanders. Expanders are designed to calibrate pipes by outer diameter and fatigue number at the ends of the pipe, to reduce the curvature of the finished pipes, leveling the final stresses in the main metal of the pipe, additional testing of weld quality, preliminary short-term testing of base metal at tangential stresses above the flow limits. Characteristic features and purposes of using the expansion process are as follows: application, if the pipe is not subject to further normalization, hardening and tempering or further heat treatment; execution only on pipes, where there is a continuous technological weld; increase in the outer diameter of the pipe by 0.3–1.5 percent within the limits set in the regulatory documentation; stepwise increase in the diameter of the pipe along the entire length of the pipe; the location of the weld in the recess of the segment of the expander so that it is not affected by radially directed forces applied to the base metal of the pipe; the ability to process the formed pipes with a weld with a wall thickness of up to 50 mm; execution of the expansion process for each pipe; use in the production of main pipes for the transportation of gas and oil. Системи трубопровідного транспорту є небезпечними техногенними об'єктами. Це визначає високий рівень вимог до труб для будівництва та ремонту трубопроводів. Забезпечення такого високого рівня технічних вимог може бути можливим на виробництвах з повним технологічним циклом і на спеціалізованому обладнанні. Після формування труб з листа і зварювання бокових торців листа в металі накопичуються залишкові напруження, що знижують надійність трубопроводів. Для забезпечення регламентованих геометричних параметрів труб і комплексу механічних властивостей метала труб на сучасних спеціалізованих трубних підприємствах усього світу проводиться операція калібрування-експандування на гідромеханічних експандерах. Експандери створені для калібрування труб за зовнішнім діаметром і в тому числі на торцях труби, для зменшення кривизни готових труб, нівелювання остаточних напружень в основному металі труби, додаткового тестування якості зварювального шва, попереднього короткострокового випробування основного металу під час тангенціальних напружень вище межі плинності. Характерними рисами та цілями використання процесу експандування є такі: застосування, якщо труба не підлягає подальшій нормалізації, загартуванню та відпуску або подальшій термообробці; виконання тільки на трубах, де є суцільний технологічний зварний шов; збільшення зовнішнього діаметра труби на 0,3–1,5 відсотка у встановлених у нормативній документації межах; покроковість збільшення діаметра труби уздовж всієї довжини труби; розташування зварного шва у виїмці сегмента експандера таким чином, щоб на нього не діяли радіально направлені сили, що прикладаються до основного металу труби; можливість обробляти сформовані труби зі зварним швом з товщиною стінки до 50 мм; виконання процесу експандування для кожної труби; застосування при виробництві магістральних труб для транспортування газу, а також нафти. Physico-technological Institute of Metals and Alloys 2023-06-07 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/78 Metal and Casting of Ukraine; Vol. 29 No. 3 (2021): Metal and Casting of Ukraine Метал та лиття України ; Том 29 № 3 (2021): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/78/78 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | магістральні трубопроводи труби великого діаметра формування зварювання експандування залишкові напруження технологічне обладнання нормативна документація надійність пружна і пластична деформація збільшення діаметра труби Проців, Володимир Григоренко, Володимир Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| title | Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| title_alt | Features of the expansion process in the technology of production of large diameter pipes for main oil and gas pipelines |
| title_full | Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| title_fullStr | Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| title_full_unstemmed | Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| title_short | Особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| title_sort | особливості процесу експандування в технологіях виробництва труб великого діаметра для магістральних нафто- та газопроводів |
| topic | магістральні трубопроводи труби великого діаметра формування зварювання експандування залишкові напруження технологічне обладнання нормативна документація надійність пружна і пластична деформація збільшення діаметра труби |
| topic_facet | main pipelines large diameter pipes forming welding expansion residual stresses technological equipment normative documentation reliability elastic and plastic deformation increase of pipe diameter магістральні трубопроводи труби великого діаметра формування зварювання експандування залишкові напруження технологічне обладнання нормативна документація надійність пружна і пластична деформація збільшення діаметра труби |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/78 |
| work_keys_str_mv | AT procívvolodimir featuresoftheexpansionprocessinthetechnologyofproductionoflargediameterpipesformainoilandgaspipelines AT grigorenkovolodimir featuresoftheexpansionprocessinthetechnologyofproductionoflargediameterpipesformainoilandgaspipelines AT procívvolodimir osoblivostíprocesuekspanduvannâvtehnologíâhvirobnictvatrubvelikogodíametradlâmagístralʹnihnaftotagazoprovodív AT grigorenkovolodimir osoblivostíprocesuekspanduvannâvtehnologíâhvirobnictvatrubvelikogodíametradlâmagístralʹnihnaftotagazoprovodív |