Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва
It is shown that one of the urgent tasks in the field of theory and technology of foundry production of synthetic cast iron, designed for the manufacture of parts of railway rolling stock (brake pads, friction “Khanin wedge”), is the further development of ideology, system, algorithm for adjusting c...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/84 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471932374646784 |
|---|---|
| author | Сіренко, К. А. Мазур, В. Л. |
| author_facet | Сіренко, К. А. Мазур, В. Л. |
| author_sort | Сіренко, К. А. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-09T07:31:46Z |
| description | It is shown that one of the urgent tasks in the field of theory and technology of foundry production of synthetic cast iron, designed for the manufacture of parts of railway rolling stock (brake pads, friction “Khanin wedge”), is the further development of ideology, system, algorithm for adjusting calculation and optimization of cast iron in the process of its melting. Based on the results of the study of the chemical composition of synthetic cast iron smelted in an industrial 3-ton induction furnace at the plant LLC "M-LYT" (Nikopol, Ukraine), it is established that the introduced technology guarantees the requirements of standards for chemical composition and mechanical properties of these products. The ranges of content of C, Si, Mn, P, S in cast iron are significantly narrower than regulated by standards. The share of S in the composition of cast iron does not exceed 0.05 %. Histograms of the density of distribution of these elements are presented, calculated from the actual data of statistical processing of a sample of more than 200 batches of synthetic cast iron in the manufacture of brake pads type “M” for locomotives according to GOST 30249-97 and GOST 33695-2015 and “Khanin wedge” according to requirements of DSTU 8833:2019. Approaches to calculation of necessary volumes of additives of alloying and modifying materials in molten cast iron at adjustment of its chemical composition are offered. Aiming points are determined from the ranges of chemical elements in the composition of cast iron regulated by normative documents when determining the required number of components added to the melt. A rational sequence of operations in the procedure of refining the chemical composition of cast iron to the specified conditions is recommended. It is proposed to take as a criterion for optimizing the chemical composition of cast iron an indicator of economic efficiency of the production process of cast iron and iron products. Ways to minimize the cost of smelting synthetic cast iron are considered. |
| first_indexed | 2026-03-12T15:50:23Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-84 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:23Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-842023-06-09T07:31:46Z Ideology of adjustment of the chemical composition of synthetic cast iron in the manufacturing process of casting Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва Сіренко, К. А. Мазур, В. Л. synthetic cast iron chemical composition adjustment technology brake pads Khanin wedge production синтетичний чавун хімічний склад коригування технологія гальмові колодки клин Ханіна виробництво It is shown that one of the urgent tasks in the field of theory and technology of foundry production of synthetic cast iron, designed for the manufacture of parts of railway rolling stock (brake pads, friction “Khanin wedge”), is the further development of ideology, system, algorithm for adjusting calculation and optimization of cast iron in the process of its melting. Based on the results of the study of the chemical composition of synthetic cast iron smelted in an industrial 3-ton induction furnace at the plant LLC "M-LYT" (Nikopol, Ukraine), it is established that the introduced technology guarantees the requirements of standards for chemical composition and mechanical properties of these products. The ranges of content of C, Si, Mn, P, S in cast iron are significantly narrower than regulated by standards. The share of S in the composition of cast iron does not exceed 0.05 %. Histograms of the density of distribution of these elements are presented, calculated from the actual data of statistical processing of a sample of more than 200 batches of synthetic cast iron in the manufacture of brake pads type “M” for locomotives according to GOST 30249-97 and GOST 33695-2015 and “Khanin wedge” according to requirements of DSTU 8833:2019. Approaches to calculation of necessary volumes of additives of alloying and modifying materials in molten cast iron at adjustment of its chemical composition are offered. Aiming points are determined from the ranges of chemical elements in the composition of cast iron regulated by normative documents when determining the required number of components added to the melt. A rational sequence of operations in the procedure of refining the chemical composition of cast iron to the specified conditions is recommended. It is proposed to take as a criterion for optimizing the chemical composition of cast iron an indicator of economic efficiency of the production process of cast iron and iron products. Ways to minimize the cost of smelting synthetic cast iron are considered. Показано, що однією з актуальних задач у сфері теорії й технології ливарного виробництва синтетичного чавуну, призначеного для виготовлення деталей залізничного рухомого складу (гальмових колодок, фрикційного «клину Ханіна»), є подальший розвиток ідеології, системи, алгоритму коригування розрахунку та оптимізації хімічного складу чавуну в процесі його плавки. На основі результатів дослідження хімічного складу синтетичного чавуну, виплавленого в промисловій трьохтонній індукційній печі на заводі ТОВ «М-ЛИТ» (місто Нікополь, Україна), встановлено, що запроваджена технологія гарантовано забезпечує вимоги стандартів до хімічного складу і механічних властивостей зазначеної продукції. Діапазони вмісту С, Si, Mn, P, S в чавуні суттєво вужчі, ніж регламентовані стандартами. Доля S в складі чавуну не перевищує 0,05 %. Представлено гістограми щільності розподілу цих елементів, розраховані за фактичними даними статистичної обробки вибірки більше ніж 200 партій синтетичного чавуну при виготовленні з нього гальмових колодок типу «М» для локомотивів згідно з ГОСТ 30249-97 і ГОСТ 33695-2015 і «клину Ханіна» згідно з вимогами ДСТУ 8833:2019. Запропоновано підходи до розрахунку необхідних обсягів добавок легуючих і модифікуючих матеріалів в розплавлений чавун при коригуванні його хімічного складу. Визначено точки прицілювання з регламентованих нормативними документами діапазонів вмісту хімічних елементів у складі чавуну при визначенні необхідної кількості компонентів, що додаються у розплав. Рекомендовано раціональну послідовність операцій в процедурі доводки хімічного складу чавуну до заданих кондицій. Запропоновано у вигляді критерію оптимізації хімічного складу чавуну приймати показник економічної ефективності процесу виробництва чавуну і виробів з нього. Розглянуто шляхи мінімізації витрат на виплавлення синтетичного чавуну. Physico-technological Institute of Metals and Alloys 2023-06-09 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/84 Metal and Casting of Ukraine; Vol. 29 No. 4 (2021): Metal and Casting of Ukraine Метал та лиття України ; Том 29 № 4 (2021): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/84/84 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | синтетичний чавун хімічний склад коригування технологія гальмові колодки клин Ханіна виробництво Сіренко, К. А. Мазур, В. Л. Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| title | Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| title_alt | Ideology of adjustment of the chemical composition of synthetic cast iron in the manufacturing process of casting |
| title_full | Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| title_fullStr | Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| title_full_unstemmed | Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| title_short | Ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| title_sort | ідеологія коригування хімічного складу синтетичного чавуну в процесі виготовлення литва |
| topic | синтетичний чавун хімічний склад коригування технологія гальмові колодки клин Ханіна виробництво |
| topic_facet | synthetic cast iron chemical composition adjustment technology brake pads Khanin wedge production синтетичний чавун хімічний склад коригування технологія гальмові колодки клин Ханіна виробництво |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/84 |
| work_keys_str_mv | AT sírenkoka ideologyofadjustmentofthechemicalcompositionofsyntheticcastironinthemanufacturingprocessofcasting AT mazurvl ideologyofadjustmentofthechemicalcompositionofsyntheticcastironinthemanufacturingprocessofcasting AT sírenkoka ídeologíâkoriguvannâhímíčnogoskladusintetičnogočavunuvprocesívigotovlennâlitva AT mazurvl ídeologíâkoriguvannâhímíčnogoskladusintetičnogočavunuvprocesívigotovlennâlitva |