Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом
Al-Si and Al-Si-Cu aluminum alloys are widely used materials in many industries. Such alloys have a very high ability to be recycled many times repeatedly. In this case, with each cycle of reuse, they increase the amount of harmful impurities. First of all, this problem concerns the increase in iron...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/85 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471932911517696 |
|---|---|
| author | Ворон, М. М. |
| author_facet | Ворон, М. М. |
| author_sort | Ворон, М. М. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2024-01-06T08:38:19Z |
| description | Al-Si and Al-Si-Cu aluminum alloys are widely used materials in many industries. Such alloys have a very high ability to be recycled many times repeatedly. In this case, with each cycle of reuse, they increase the amount of harmful impurities. First of all, this problem concerns the increase in iron content. Decreasing its harmful effects by adding manganese is a classic and quite satisfactory way to ensure the quality and the required level of mechanical properties of cast parts. The use of other modifiers, especially in combination with manganese and with each other, can significantly expand the possibilities of reducing the harmful effects of iron and improving the mechanical properties of such alloys. The complex effect of Co, V and Mo on the structure and phase composition of the well-known widely used AlSi12Cu2 alloy, which already contained a small amount of chromium to enhance the modifying effect of manganese, was investigated. All modifying additives were added in an amount of 0.1–0.2 wt.%. In this case, their total content did not exceed 0.3 wt.%. It is shown that the simultaneous presence of chromium with vanadium or molybdenum in the alloy leads to the formation of coarse modified phase Al15(Fe, Mn)3Si2, the size of which is about 80–150 μm. The formation of such adverse inclusions leads to the presence of chromium, which follows from a comparison with previous studies, where chromium in the alloys was absent. When cobalt is added, iron-containing phases are formed in more favorable morphology and small sizes of about 5–20 μm. Also, these phases occur in the form of closely spaced placers of small particles smaller than 10 μm. |
| first_indexed | 2026-03-12T15:50:24Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-85 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:24Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-852024-01-06T08:38:19Z Influence of Co, V and Mo on the structure and phase composition of chromium-modified AlSi12Cu2 casting alloy Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом Ворон, М. М. cast aluminum alloys modification AlSi12Cu2 structure phase composition ливарні алюмінієві сплави модифікування AK12M2 структура фазовий склад Al-Si and Al-Si-Cu aluminum alloys are widely used materials in many industries. Such alloys have a very high ability to be recycled many times repeatedly. In this case, with each cycle of reuse, they increase the amount of harmful impurities. First of all, this problem concerns the increase in iron content. Decreasing its harmful effects by adding manganese is a classic and quite satisfactory way to ensure the quality and the required level of mechanical properties of cast parts. The use of other modifiers, especially in combination with manganese and with each other, can significantly expand the possibilities of reducing the harmful effects of iron and improving the mechanical properties of such alloys. The complex effect of Co, V and Mo on the structure and phase composition of the well-known widely used AlSi12Cu2 alloy, which already contained a small amount of chromium to enhance the modifying effect of manganese, was investigated. All modifying additives were added in an amount of 0.1–0.2 wt.%. In this case, their total content did not exceed 0.3 wt.%. It is shown that the simultaneous presence of chromium with vanadium or molybdenum in the alloy leads to the formation of coarse modified phase Al15(Fe, Mn)3Si2, the size of which is about 80–150 μm. The formation of such adverse inclusions leads to the presence of chromium, which follows from a comparison with previous studies, where chromium in the alloys was absent. When cobalt is added, iron-containing phases are formed in more favorable morphology and small sizes of about 5–20 μm. Also, these phases occur in the form of closely spaced placers of small particles smaller than 10 μm. Ливарні алюмінієві сплави систем Al-Si та Al-Si-Cu є широко використовуваними матеріалами в багатьох галузях промисловості. Такі сплави мають дуже високу здатність до багаторазової вторинної переробки. При цьому, з кожним циклом повторного використання, в них збільшується кількість шкідливих домішок. В першу чергу така проблема стосується підвищення вмісту заліза. Нівелювання його шкідливого впливу за допомогою додавання марганцю є класичним та цілком задовільним способом забезпечення якості та потрібного рівня механічних властивостей литих деталей. Застосування інших модифікаторів, особливо у комплексі з марганцем та один з одним, може значно розширити можливості зниження шкідливого впливу заліза та підвищення механічних властивостей силумінів. В роботі досліджувався комплексний вплив Co, V та Мо на структуру та фазовий склад відомого широковживаного силуміну АК12М2, який вже містив у своєму складі незначну кількість хрому для підсилення модифікуючого впливу марганцю. Всі модифікуючі добавки вводилися в кількості 0,1–0,2 %мас. При цьому, їх сумарний вміст не перевищував 0,3 %мас. Показано, що одночасна присутність хрому з ванадієм або молібденом у складі сплаву призводить до утворення грубих виділень модифікованої фази Al15(Fe, Mn)3Si2, розміри яких складають в середньому 80–150 мкм. До утворення саме таких несприятливих включень призводить наявність хрому, що випливає з порівняння із попередніми дослідженнями, де хром у складі сплавів був відсутнім. При додаванні кобальту відбувається формування залізовмісних фаз більш сприятливої морфології та дрібних розмірів близько 5–20 мкм. Також ці фази зустрічаються у вигляді близько розташованих розсипів дрібних частинок розмірами менше 10 мкм. Physico-technological Institute of Metals and Alloys 2023-06-09 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/85 10.15407/steelcast2021.04.055 Metal and Casting of Ukraine; Vol. 29 No. 4 (2021): Metal and Casting of Ukraine Метал та лиття України ; Том 29 № 4 (2021): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/85/85 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | ливарні алюмінієві сплави модифікування AK12M2 структура фазовий склад Ворон, М. М. Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом |
| title | Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом |
| title_alt | Influence of Co, V and Mo on the structure and phase composition of chromium-modified AlSi12Cu2 casting alloy |
| title_full | Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом |
| title_fullStr | Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом |
| title_full_unstemmed | Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом |
| title_short | Вплив Co, V та Mo на структуру та фазовий склад ливарного сплаву АК12М2, модифікованого хромом |
| title_sort | вплив co, v та mo на структуру та фазовий склад ливарного сплаву ак12м2, модифікованого хромом |
| topic | ливарні алюмінієві сплави модифікування AK12M2 структура фазовий склад |
| topic_facet | cast aluminum alloys modification AlSi12Cu2 structure phase composition ливарні алюмінієві сплави модифікування AK12M2 структура фазовий склад |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/85 |
| work_keys_str_mv | AT voronmm influenceofcovandmoonthestructureandphasecompositionofchromiummodifiedalsi12cu2castingalloy AT voronmm vplivcovtamonastrukturutafazovijskladlivarnogosplavuak12m2modifíkovanogohromom |