Отримання і застосування комплексних модифікаторів з рідкісноземельними металами
The results of research and refinement of the technology for producing complex modifiers (CM) by the carbon thermal method from agglomerated raw materials and their use in rolling mill production are presented. These studies were preceded by a study of the modifying effect of individual rare-earth m...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/95 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471937095335936 |
|---|---|
| author | Іванова, Л. Х. Колотило, Є. В. Хитько, О. Ю. Терехін, В. О. |
| author_facet | Іванова, Л. Х. Колотило, Є. В. Хитько, О. Ю. Терехін, В. О. |
| author_sort | Іванова, Л. Х. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-11T05:57:42Z |
| description | The results of research and refinement of the technology for producing complex modifiers (CM) by the carbon thermal method from agglomerated raw materials and their use in rolling mill production are presented. These studies were preceded by a study of the modifying effect of individual rare-earth metals (REM) of the cerium group (cerium, lanthanum and samarium) on the crystallization parameters and structure formation of roll cast irons at various cooling rates that take place in real roll form. It was found that the minimum required amount of modifier, which allowed to achieve the maximum level of decrease in the temperature of the onset of eutectic crystallization, depended on the cooling rate. An increase in the cooling rate led to a shift in this amount of modifier towards lower concentrations.
Studies on the development of modes for obtaining complex modifiers using the technology of formed ore-carbon materials containing in one piece a reducing agent and oxides of various rare-earth metals of the cerium group were carried out in laboratory and industrial conditions. In laboratory conditions, the studies were carried out on the installation, which consisted of a high-speed heating unit, a forming unit, a sintering and annealing unit. The results of the study showed that the sheer influence of oxides on coal in ore-coal mixtures grew in a number of oxides: cerium dioxide, samarium oxide, lanthanum oxide, and the introduction of lanthanum oxide weakened significantly, and the introduction of cerium dioxide – to a lesser extent. Samarium oxide exerted a thinning effect, more significant than cerium dioxide, but less than lanthanum oxide. According to the developed technological regimes, molded carbon-ore materials containing individual oxides of various rare-earth metals were obtained and used for smelting CM. Modification by these modifiers within the studied concentrations stimulated the crystallization of austenite. |
| first_indexed | 2026-03-12T15:50:28Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-95 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:28Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-952023-06-11T05:57:42Z Obtaining and application of complex modifiers with rare-earth metals Отримання і застосування комплексних модифікаторів з рідкісноземельними металами Іванова, Л. Х. Колотило, Є. В. Хитько, О. Ю. Терехін, В. О. carbon-ore material rare-earth metal roll iron modification crystallization parameter structure рудно-вуглецевий матеріал рідкісноземельний метал валковий чавун модифікування параметр кристалізації структура The results of research and refinement of the technology for producing complex modifiers (CM) by the carbon thermal method from agglomerated raw materials and their use in rolling mill production are presented. These studies were preceded by a study of the modifying effect of individual rare-earth metals (REM) of the cerium group (cerium, lanthanum and samarium) on the crystallization parameters and structure formation of roll cast irons at various cooling rates that take place in real roll form. It was found that the minimum required amount of modifier, which allowed to achieve the maximum level of decrease in the temperature of the onset of eutectic crystallization, depended on the cooling rate. An increase in the cooling rate led to a shift in this amount of modifier towards lower concentrations. Studies on the development of modes for obtaining complex modifiers using the technology of formed ore-carbon materials containing in one piece a reducing agent and oxides of various rare-earth metals of the cerium group were carried out in laboratory and industrial conditions. In laboratory conditions, the studies were carried out on the installation, which consisted of a high-speed heating unit, a forming unit, a sintering and annealing unit. The results of the study showed that the sheer influence of oxides on coal in ore-coal mixtures grew in a number of oxides: cerium dioxide, samarium oxide, lanthanum oxide, and the introduction of lanthanum oxide weakened significantly, and the introduction of cerium dioxide – to a lesser extent. Samarium oxide exerted a thinning effect, more significant than cerium dioxide, but less than lanthanum oxide. According to the developed technological regimes, molded carbon-ore materials containing individual oxides of various rare-earth metals were obtained and used for smelting CM. Modification by these modifiers within the studied concentrations stimulated the crystallization of austenite. Наведено результати дослідження і уточнення технології отримання комплексних модифікаторів (КМ) вуглетермічним способом з окускованої сировини та застосування їх у вальцеливарному виробництві. Цим дослідженням передувало дослідження особливостей модифікуючого впливу індивідуальних рідкісноземельних металів (РЗМ) церієвої групи (церію, лантану та самарію) на параметри кристалізації і структуроутворення валкових чавунів при різних швидкостях охолодження, що мають місце у реальній валковій формі. Встановлено, що мінімальна необхідна кількість модифікатора, що дозволяла досягти максимального рівня зниження температури початку евтектичної кристалізації, залежала від швидкості охолодження. Підвищення швидкості охолодження призводило до зміщення цієї кількості модифікатора у бік менших концентрацій. Дослідження з відпрацювання режимів отримання комплексних модифікаторів за технологією формованих рудно-вуглецевих матеріалів, що містили в одному шматку відновник і оксиди різних рідкісноземельних металів церієвої групи, проводили у лабораторних і промислових умовах. В лабораторних умовах дослідження проводили на установці, яка складалася з вузла швидкісного нагріву, вузла формування, вузла спікання і прожарювання. Результати дослідження показали, що послаблюючий вплив оксидів на вугілля в рудно-вугільних сумішах зростав у ряді оксидів: діоксид церію, оксид самарію, оксид лантану, причому найзначніше охляло рудно-вугільну суміш введення оксиду лантану, а найменшою мірою – введення діоксиду церію. Оксид самарію чинив послаблюючу дію, значнішу, ніж діоксид церію, але меншу, ніж оксид лантану. За відпрацьованими технологічними режимами було отримано формовані рудно-вуглецеві матеріали, що містили індивідуальні оксиди різних РЗМ, і використано для виплавляння КМ. Модифікування вказаними модифікаторами в межах досліджених концентрацій стимулювало кристалізацію аустеніту. Physico-technological Institute of Metals and Alloys 2023-06-11 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/95 Metal and Casting of Ukraine; Vol. 28 No. 1 (2020): Метал та лиття України Метал та лиття України ; Том 28 № 1 (2020): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/95/95 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | рудно-вуглецевий матеріал рідкісноземельний метал валковий чавун модифікування параметр кристалізації структура Іванова, Л. Х. Колотило, Є. В. Хитько, О. Ю. Терехін, В. О. Отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| title | Отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| title_alt | Obtaining and application of complex modifiers with rare-earth metals |
| title_full | Отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| title_fullStr | Отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| title_full_unstemmed | Отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| title_short | Отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| title_sort | отримання і застосування комплексних модифікаторів з рідкісноземельними металами |
| topic | рудно-вуглецевий матеріал рідкісноземельний метал валковий чавун модифікування параметр кристалізації структура |
| topic_facet | carbon-ore material rare-earth metal roll iron modification crystallization parameter structure рудно-вуглецевий матеріал рідкісноземельний метал валковий чавун модифікування параметр кристалізації структура |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/95 |
| work_keys_str_mv | AT ívanovalh obtainingandapplicationofcomplexmodifierswithrareearthmetals AT kolotiloêv obtainingandapplicationofcomplexmodifierswithrareearthmetals AT hitʹkooû obtainingandapplicationofcomplexmodifierswithrareearthmetals AT terehínvo obtainingandapplicationofcomplexmodifierswithrareearthmetals AT ívanovalh otrimannâízastosuvannâkompleksnihmodifíkatorívzrídkísnozemelʹnimimetalami AT kolotiloêv otrimannâízastosuvannâkompleksnihmodifíkatorívzrídkísnozemelʹnimimetalami AT hitʹkooû otrimannâízastosuvannâkompleksnihmodifíkatorívzrídkísnozemelʹnimimetalami AT terehínvo otrimannâízastosuvannâkompleksnihmodifíkatorívzrídkísnozemelʹnimimetalami |