Инновационные технологии выплавки стали для фасонных отливок
The productivity of the foundry largely depends on the metallurgical stage. When assessing the influence of steel melting technology in acidic and basic furnaces, a connection was established between the technological and strength characteristics of castings: strength and ductility, properties of ca...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/98 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471938847506432 |
|---|---|
| author | Лысенко, Т. В. Ясюков, В. В. Тур, М. П. Бежанова, А. Н. |
| author_facet | Лысенко, Т. В. Ясюков, В. В. Тур, М. П. Бежанова, А. Н. |
| author_sort | Лысенко, Т. В. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-11T05:57:42Z |
| description | The productivity of the foundry largely depends on the metallurgical stage. When assessing the influence of steel melting technology in acidic and basic furnaces, a connection was established between the technological and strength characteristics of castings: strength and ductility, properties of castings after heat treatment, cracking, etc. These and other differences in properties should be taken into account by specialists developing and preparing technological processes. The introduced and implemented technical, technological and organizational innovations are considered, which provide an increase in the efficiency of electric steel smelting. Among them are the evaluation of the quality of the charge by geometric parameters, pollution of the scrap surface with non-ferrous metals, the need for briquetting and chip packing. Much attention is paid to the physicochemical processes that occur when sulfur and phosphorus are removed from metals. Comparative technical and economic indicators of the operation of electric arc furnaces with acidic and basic lining are given. The main parameters are emphasized: the resistance of an acid lining is almost two times higher than the basic; the acidlined furnace charges of 20 % more; the duration of the basic heat is increased by 30–40 minutes in comparison with acidic. Recommendations are given on the selection and calculation of electrodes, the arrangement of electrode holders, and economizers. The technology of steel refining with synthetic slag in a ladle when releasing steel from a furnace is described. Examples of the use of nanomaterials in the modification of steel are given, which makes it possible to obtain castings with a homogeneous fine-grained structure in various sections, and increased operational reliability of cast parts. |
| first_indexed | 2026-03-12T15:50:29Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-98 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:29Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-982023-06-11T05:57:42Z Innovative steelmaking technologies for shaped castings Инновационные технологии выплавки стали для фасонных отливок Лысенко, Т. В. Ясюков, В. В. Тур, М. П. Бежанова, А. Н. electric arc steel smelting charge acidic and basic melting desulfurization dephosphorization out-of-furnace treatment nanomodification электродуговая плавка стали шихта кислая и основная плавка десульфурация дефосфорация внепечная обработка наномодифицирование The productivity of the foundry largely depends on the metallurgical stage. When assessing the influence of steel melting technology in acidic and basic furnaces, a connection was established between the technological and strength characteristics of castings: strength and ductility, properties of castings after heat treatment, cracking, etc. These and other differences in properties should be taken into account by specialists developing and preparing technological processes. The introduced and implemented technical, technological and organizational innovations are considered, which provide an increase in the efficiency of electric steel smelting. Among them are the evaluation of the quality of the charge by geometric parameters, pollution of the scrap surface with non-ferrous metals, the need for briquetting and chip packing. Much attention is paid to the physicochemical processes that occur when sulfur and phosphorus are removed from metals. Comparative technical and economic indicators of the operation of electric arc furnaces with acidic and basic lining are given. The main parameters are emphasized: the resistance of an acid lining is almost two times higher than the basic; the acidlined furnace charges of 20 % more; the duration of the basic heat is increased by 30–40 minutes in comparison with acidic. Recommendations are given on the selection and calculation of electrodes, the arrangement of electrode holders, and economizers. The technology of steel refining with synthetic slag in a ladle when releasing steel from a furnace is described. Examples of the use of nanomaterials in the modification of steel are given, which makes it possible to obtain castings with a homogeneous fine-grained structure in various sections, and increased operational reliability of cast parts. Продуктивность литейного производства в значительной степени зависит от металлургического передела. При оценке влияния технологии плавки стали в кислых и основных печах установлена связь технологических и прочностных характеристик отливок: прочности и пластичности, свойств отливок после термообработки, формирование трещин и др. Эти и другие различия свойств должны учитываться специалистами, разрабатывающими и подготавливающими технологические процессы. Рассматриваются внедренные и внедряемые технические, технологические и организационные новшества, обеспечивающие повышение эффективности электроплавки стали. Среди них оценка качества шихты по геометрическим параметрам, загрязнению поверхности лома цветными металлами, необходимости брикетирования и пакетирования стружки. Большое внимание уделено физико-химическим процессам, протекающим при удалении серы и фосфора из металлов. Приведены сравнительные технико-экономические показатели работы электродуговых печей с кислой и основной футеровкой, при этом подчеркиваются основные параметры: стойкость кислой футеровки почти в два раза выше стойкости основной; печь на кислой футеровке заваливается на 20 % полнее; длительность основной плавки увеличивается на 30–40 мин в сравнении с кислой. Даны рекомендации по выбору и расчету электродов, устройству электрододержателей, экономайзеров. Описывается технология рафинирования стали синтетическим шлаком в ковше при выпуске стали из печи. Приводятся примеры применения наноматериалов при модифицировании стали, что позволяет получать отливки с однородной мелкозернистой структурой в различных сечениях, повышенной эксплуатационной надежностью литых деталей. Physico-technological Institute of Metals and Alloys 2023-06-11 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/98 Metal and Casting of Ukraine; Vol. 28 No. 1 (2020): Метал та лиття України Метал та лиття України ; Том 28 № 1 (2020): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/98/98 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | электродуговая плавка стали шихта кислая и основная плавка десульфурация дефосфорация внепечная обработка наномодифицирование Лысенко, Т. В. Ясюков, В. В. Тур, М. П. Бежанова, А. Н. Инновационные технологии выплавки стали для фасонных отливок |
| title | Инновационные технологии выплавки стали для фасонных отливок |
| title_alt | Innovative steelmaking technologies for shaped castings |
| title_full | Инновационные технологии выплавки стали для фасонных отливок |
| title_fullStr | Инновационные технологии выплавки стали для фасонных отливок |
| title_full_unstemmed | Инновационные технологии выплавки стали для фасонных отливок |
| title_short | Инновационные технологии выплавки стали для фасонных отливок |
| title_sort | инновационные технологии выплавки стали для фасонных отливок |
| topic | электродуговая плавка стали шихта кислая и основная плавка десульфурация дефосфорация внепечная обработка наномодифицирование |
| topic_facet | electric arc steel smelting charge acidic and basic melting desulfurization dephosphorization out-of-furnace treatment nanomodification электродуговая плавка стали шихта кислая и основная плавка десульфурация дефосфорация внепечная обработка наномодифицирование |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/98 |
| work_keys_str_mv | AT lysenkotv innovativesteelmakingtechnologiesforshapedcastings AT âsûkovvv innovativesteelmakingtechnologiesforshapedcastings AT turmp innovativesteelmakingtechnologiesforshapedcastings AT bežanovaan innovativesteelmakingtechnologiesforshapedcastings AT lysenkotv innovacionnyetehnologiivyplavkistalidlâfasonnyhotlivok AT âsûkovvv innovacionnyetehnologiivyplavkistalidlâfasonnyhotlivok AT turmp innovacionnyetehnologiivyplavkistalidlâfasonnyhotlivok AT bežanovaan innovacionnyetehnologiivyplavkistalidlâfasonnyhotlivok |