К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
The high-pressure turbine rotor is the most critical and costly steam turbine component. Service experience for the machines with a power of 150 MW and more shows that cracks appear in the region of regulation stage fillets and end seals in high-pressure turbine rotors. The cause of this effect can...
Saved in:
| Date: | 2017 |
|---|---|
| Main Authors: | Бахмутская, Ю. О., Голощапов, В. Н. |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2017
|
| Subjects: | |
| Online Access: | https://journals.uran.ua/jme/article/view/105599 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingSimilar Items
К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
by: Бахмутская, Ю. О., et al.
Published: (2017)
by: Бахмутская, Ю. О., et al.
Published: (2017)
Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
by: Шиманяк, М., et al.
Published: (2016)
by: Шиманяк, М., et al.
Published: (2016)
Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
by: Шиманяк, М., et al.
Published: (2016)
by: Шиманяк, М., et al.
Published: (2016)
MATHEMATICAL DESCRIPTION OF THE SOLID FUEL GASIFICATION PROCESS IN A FIXED BED: 1. NUMERICAL RESULTS OF THERMAL-CHEMICAL PROCESSING OF PEAT IN A VAPOR- OXYGEN MIXTURE UNDER A PRESSURE OF 3 MPa
by: Rokhman, B.
Published: (2019)
by: Rokhman, B.
Published: (2019)
Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
by: Солодов, В. Г., et al.
Published: (2016)
by: Солодов, В. Г., et al.
Published: (2016)
Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
by: Солодов, В. Г., et al.
Published: (2016)
by: Солодов, В. Г., et al.
Published: (2016)
Experimental Study of the Model Compartment of the Low-Pressure Cylinder of K-320-240 Turbines of JSC "Turboatom"
by: Alyokhina, Svitlana V., et al.
Published: (2019)
by: Alyokhina, Svitlana V., et al.
Published: (2019)
Experimental Study of the Model Compartment of the Low-Pressure Cylinder of K-320-240 Turbines of JSC "Turboatom"
by: Alyokhina, Svitlana V., et al.
Published: (2019)
by: Alyokhina, Svitlana V., et al.
Published: (2019)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Palkov, Ihor A., et al.
Published: (2019)
by: Palkov, Ihor A., et al.
Published: (2019)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
by: Palkov, Ihor A., et al.
Published: (2019)
by: Palkov, Ihor A., et al.
Published: (2019)
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
by: Кобзарь, К. А., et al.
Published: (2015)
by: Кобзарь, К. А., et al.
Published: (2015)
Thermal state of the rotor winding of the turbogenerator with direct hydrogen cooling
by: Кобзарь, К. А., et al.
Published: (2015)
by: Кобзарь, К. А., et al.
Published: (2015)
DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
by: Ostashevskiy, N. A., et al.
Published: (2013)
by: Ostashevskiy, N. A., et al.
Published: (2013)
Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
by: Ліщук, С. Р., et al.
Published: (2024)
by: Ліщук, С. Р., et al.
Published: (2024)
Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
by: Ліщук, С. Р., et al.
Published: (2024)
by: Ліщук, С. Р., et al.
Published: (2024)
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, Andrii S., et al.
Published: (2019)
by: Koliadiuk, Andrii S., et al.
Published: (2019)
Thermal and Stress State of the Steam Turbine Control Valve Casing, with the Turbine Operation in the Stationary Modes
by: Koliadiuk, Andrii S., et al.
Published: (2019)
by: Koliadiuk, Andrii S., et al.
Published: (2019)
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 43: TRADITIONAL POWER ENGINEERING. THERMAL POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
by: Baranov, M. I.
Published: (2018)
by: Baranov, M. I.
Published: (2018)
TWO-DIMENSIONAL MODEL OF THE SOLID FUEL GASIFICATION IN A FIXED BED UNDER PRESSER. 1. INVESTIGATION OF SHUBARKOL COAL CONVERSION IN A STEAM-OXYGEN MIXTURE WITH THE MASS PART OF H2О/O2=45/55
by: Rokhman, B.
Published: (2019)
by: Rokhman, B.
Published: (2019)
DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BIOMASS THERMO-CHEMICAL PROCESSING PART 4 CALCULATIONS RESULTS OF ELECTRIC HEATERS AND COKE ASH RESIDUE GASIFICATION
by: Rokhman, B., et al.
Published: (2025)
by: Rokhman, B., et al.
Published: (2025)
Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
by: Palkov, Serhii A., et al.
Published: (2019)
by: Palkov, Serhii A., et al.
Published: (2019)
Elastic Stress-Strain State of Elements of the Internal High-Pressure Casing for Steam Turbines
by: Palkov, Serhii A., et al.
Published: (2019)
by: Palkov, Serhii A., et al.
Published: (2019)
TWO-DIMENSIONAL MODEL OF THE SOLID FUEL GASIFICATION IN A FIXED BED UNDER PRESSER. 2. NUMERICAL RESULTS OF THERMAL-CHEMICAL PROCESSING OF SHUBARKOL COAL AT A RATIO OF MASS FRACTIONS H2О/O2=72/28
by: Rokhman, B.
Published: (2019)
by: Rokhman, B.
Published: (2019)
Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
by: Русанов, А. В., et al.
Published: (2022)
by: Русанов, А. В., et al.
Published: (2022)
Development of the Flow Part of Reactive Type HPC of K-325-23.5 Series Steam Turbine Based on the Use of Modern Computer Technologies
by: Русанов, А. В., et al.
Published: (2022)
by: Русанов, А. В., et al.
Published: (2022)
Numerical study of flow irregularity in a new type control section of steam turbine high-pressure module
by: Bykov, Yurii A., et al.
Published: (2025)
by: Bykov, Yurii A., et al.
Published: (2025)
Numerical study of flow irregularity in a new type control section of steam turbine high-pressure module
by: Bykov, Yurii A., et al.
Published: (2025)
by: Bykov, Yurii A., et al.
Published: (2025)
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
by: Овсянникова, Е. А.
Published: (2017)
by: Овсянникова, Е. А.
Published: (2017)
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
by: Овсянникова, Е. А.
Published: (2017)
by: Овсянникова, Е. А.
Published: (2017)
Эффективный метод подготовки бурого угля к сжиганию на тепловых электрических станциях
by: Кутовой, Владимир Александрович
Published: (2015)
by: Кутовой, Владимир Александрович
Published: (2015)
Эффективный метод подготовки бурого угля к сжиганию на тепловых электрических станциях
by: Кутовой, Владимир Александрович
Published: (2015)
by: Кутовой, Владимир Александрович
Published: (2015)
NUMERICAL STUDIES OF A TWO-STAGE THERMOCHEMICAL BIOMASS PROCESSING IN A FIXED BED PLANT WITH A CAPACITY OF 1250 kg/h
by: Rokhman, B., et al.
Published: (2023)
by: Rokhman, B., et al.
Published: (2023)
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
by: Shulzhenko, Nikolay G., et al.
Published: (2018)
by: Shulzhenko, Nikolay G., et al.
Published: (2018)
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
by: Shulzhenko, Nikolay G., et al.
Published: (2018)
by: Shulzhenko, Nikolay G., et al.
Published: (2018)
THEORETICAL STUDY OF NONSTATIONARY AIR GASIFICATION OF SOLID FUEL IN A FIXED BED AT ATMOSPHERIC PRESSURE
by: Rokhman, B., et al.
Published: (2020)
by: Rokhman, B., et al.
Published: (2020)
DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BAGASSE THER-MOCHEMICAL PROCESSING PART 1 REACTOR DESCRIPTION AND WORKFLOW MODELING
by: Rohman , B. B., et al.
Published: (2024)
by: Rohman , B. B., et al.
Published: (2024)
DESIGN FEATURES OF THE EXPERIMENTAL UNIT AND NUMERICAL STUDIES OF BAGASSE THERMOCHEMICAL PROCESSING PART 2. ANALYSIS OF THE PYROLYSIS PROCESS IN A FIXED BED APPARATUS
by: Rohman , B., et al.
Published: (2024)
by: Rohman , B., et al.
Published: (2024)
CALCULATION OF THE THERMAL FIELD OF A POLYFUNCTIONAL ELECTROMECHANICAL TRANSDUCER WITH A HOLLOW PERFORATED ROTOR
by: Zablodskii, N. N., et al.
Published: (2013)
by: Zablodskii, N. N., et al.
Published: (2013)
DETERMINATION OF THERMOPHYSICAL PROPERTIES OF ROCKS USING WELLS
by: Morozov, Y.
Published: (2023)
by: Morozov, Y.
Published: (2023)
Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
by: Malyar, V. S., et al.
Published: (2022)
by: Malyar, V. S., et al.
Published: (2022)
Similar Items
-
К-325-23,5 Steam Turbine High-Pressure Rotor Thermal and Thermo-structural State during cold start-up
by: Бахмутская, Ю. О., et al.
Published: (2017) -
Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
by: Шиманяк, М., et al.
Published: (2016) -
Performance analysis of a new LP stage located upstream the extraction point in a 225 MW turbine
by: Шиманяк, М., et al.
Published: (2016) -
MATHEMATICAL DESCRIPTION OF THE SOLID FUEL GASIFICATION PROCESS IN A FIXED BED: 1. NUMERICAL RESULTS OF THERMAL-CHEMICAL PROCESSING OF PEAT IN A VAPOR- OXYGEN MIXTURE UNDER A PRESSURE OF 3 MPa
by: Rokhman, B.
Published: (2019) -
Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
by: Солодов, В. Г., et al.
Published: (2016)