Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling

Modeling of the rotor thermal state of a synchronous turbogenerator of 550 MW with direct cooling of the winding by hydrogen is performed. The temperature field of the rotor is investigated by finite element method in a three-dimensional formulation. Mathematical modeling of the task is implemented...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2017
Автор: Овсянникова, Е. А.
Формат: Стаття
Мова:Russian
Опубліковано: Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2017
Теми:
Онлайн доступ:https://journals.uran.ua/jme/article/view/111550
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Energy Technologies & Resource Saving

Репозитарії

Energy Technologies & Resource Saving
id oai:ojs.journals.uran.ua:article-111550
record_format ojs
spelling oai:ojs.journals.uran.ua:article-1115502017-11-04T21:59:12Z Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling Оптимальное проектирование конструкций при комбинированном подходе к учету коррозии и защитных свойств антикоррозионных покрытий Овсянникова, Е. А. turbogenerator rotor winding thermal state finite element method УДК 621.1.016.7 турбогенератор обмотка ротора тепловое состояние метод конечных элементов УДК 624.04 турбогенератор обмотка ротора тепловий стан метод скінченних елементів УДК 621.1.016.7 Modeling of the rotor thermal state of a synchronous turbogenerator of 550 MW with direct cooling of the winding by hydrogen is performed. The temperature field of the rotor is investigated by finite element method in a three-dimensional formulation. Mathematical modeling of the task is implemented in the SolidWorks computer environment. Correlations for determination of the heat transfer coefficients that were obtained by different scientists in 1959-1970 and applicated in the design of cooling systems for nuclear rocket engines are given. Correlation was selected that provides temperature distribution corresponds to test results. The temperature distribution of the rotor winding was obtained as a result of thermal test of 550 MW turbogenerator which were carried out at State Enterprise «Plant «Electrotyazhmash» in idling and short circuit mode. According to test results, maximum temperature of the rotor winding in the nominal mode was 74.7 ° C (347.7 K). The comparison of the calculated data and test results shows that the difference is not more than 10%. The thermal state of the rotor does not restrict of the nominal power of the generator Выполнено моделирование теплового состояния ротора синхронного турбогенератора мощностью 550 МВт с непосредственным охлаждением обмотки водородом. Температурное поле ротора исследовано с помощью метода конечных элементов в трехмерной постановке. Математическое моделирование поставленной задачи реализовано в компьютерной среде SolidWorks. Приведены корреляции для определения коэффициентов теплоотдачи, которые были получены разными учеными в 1959-1970 гг. и нашли применение в области проектирования систем охлаждения ядерных ракетных двигателей. Выбрана корреляция, которая обеспечивает соответствие расчетного распределения температур в роторе и испытательного. Распределение температур в обмотке ротора получено в результате проведения тепловых испытаний турбогенератора мощностью 550 МВт на ГП «Завод «Электротяжмаш» в режиме холостого хода и короткого замыкания. По результатам испытаний максимальная температура обмотки ротора в номинальном режиме составила 74,7 °С (347,7 К). Сравнение расчётных данных и результатов испытаний показывает, что погрешность расхождения составляет не более 10%. Тепловое состояние ротора не накладывает ограничений на величину номинальной мощности генератора. Виконано моделювання теплового стану вузлів ротора синхронного турбогенератора потужністю 550 МВт з безпосереднім охолодженням обмоток воднем. Температурне поле ротора досліджено за допомогою методу скінченних елементів у тривимірній постановці. Наведено кореляції для визначення коефіцієнтів теплопередачі, що були отримані різними вченими під час проведення серії експериментів і обрано ту, що забезпечує відповідність розрахункового розподілу температур у роторі до випробувального Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2017-10-05 Article Article application/pdf https://journals.uran.ua/jme/article/view/111550 Journal of Mechanical Engineering; Vol. 20 No. 3 (2017); 19-24 Проблемы машиностроения; Том 20 № 3 (2017); 19-24 Проблеми машинобудування; Том 20 № 3 (2017); 19-24 2709-2992 2709-2984 ru https://journals.uran.ua/jme/article/view/111550/106527 Copyright (c) 2017 Е. А. Овсянникова https://creativecommons.org/licenses/by-nd/4.0
institution Energy Technologies & Resource Saving
baseUrl_str
datestamp_date 2017-11-04T21:59:12Z
collection OJS
language Russian
topic turbogenerator
rotor winding
thermal state
finite element method
УДК 621.1.016.7
spellingShingle turbogenerator
rotor winding
thermal state
finite element method
УДК 621.1.016.7
Овсянникова, Е. А.
Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
topic_facet turbogenerator
rotor winding
thermal state
finite element method
УДК 621.1.016.7
турбогенератор
обмотка ротора
тепловое состояние
метод конечных элементов
УДК 624.04
турбогенератор
обмотка ротора
тепловий стан
метод скінченних елементів
УДК 621.1.016.7
format Article
author Овсянникова, Е. А.
author_facet Овсянникова, Е. А.
author_sort Овсянникова, Е. А.
title Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
title_short Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
title_full Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
title_fullStr Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
title_full_unstemmed Development Thermal state of the rotor of the turbogenerator with direct hydrogen cooling
title_sort development thermal state of the rotor of the turbogenerator with direct hydrogen cooling
title_alt Оптимальное проектирование конструкций при комбинированном подходе к учету коррозии и защитных свойств антикоррозионных покрытий
description Modeling of the rotor thermal state of a synchronous turbogenerator of 550 MW with direct cooling of the winding by hydrogen is performed. The temperature field of the rotor is investigated by finite element method in a three-dimensional formulation. Mathematical modeling of the task is implemented in the SolidWorks computer environment. Correlations for determination of the heat transfer coefficients that were obtained by different scientists in 1959-1970 and applicated in the design of cooling systems for nuclear rocket engines are given. Correlation was selected that provides temperature distribution corresponds to test results. The temperature distribution of the rotor winding was obtained as a result of thermal test of 550 MW turbogenerator which were carried out at State Enterprise «Plant «Electrotyazhmash» in idling and short circuit mode. According to test results, maximum temperature of the rotor winding in the nominal mode was 74.7 ° C (347.7 K). The comparison of the calculated data and test results shows that the difference is not more than 10%. The thermal state of the rotor does not restrict of the nominal power of the generator
publisher Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
publishDate 2017
url https://journals.uran.ua/jme/article/view/111550
work_keys_str_mv AT ovsânnikovaea developmentthermalstateoftherotoroftheturbogeneratorwithdirecthydrogencooling
AT ovsânnikovaea optimalʹnoeproektirovaniekonstrukcijprikombinirovannompodhodekučetukorroziiizaŝitnyhsvojstvantikorrozionnyhpokrytij
first_indexed 2025-07-17T12:01:11Z
last_indexed 2025-07-17T12:01:11Z
_version_ 1850411511865933824