Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
When constructing mathematical models of corrosion wear of structures, it is also necessary to take into account the work of protective coatings and determine the duration of the incubation period characterizing the durability of the protective coatings used. Protective coatings are barrier layers t...
Gespeichert in:
| Datum: | 2017 |
|---|---|
| 1. Verfasser: | Фридман, М. М. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2017
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/113782 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: M. M. Fridman
Veröffentlicht: (2017)
von: M. M. Fridman
Veröffentlicht: (2017)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: M. M. Fridman
Veröffentlicht: (2018)
von: M. M. Fridman
Veröffentlicht: (2018)
Design of Nanostructured Luminofor Coating for a Multi-Junction Solar Cell
von: Beliak, Ie. V., et al.
Veröffentlicht: (2013)
von: Beliak, Ie. V., et al.
Veröffentlicht: (2013)
High-tempe-rature reflective coatings for long-term storage media
von: Petrov, V. V., et al.
Veröffentlicht: (2019)
von: Petrov, V. V., et al.
Veröffentlicht: (2019)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
NUMERICAL ESTIMATES OF CURRENTS AND FORCES IN LINEAR TOOLS OF THE MAGNETIC-PULSE ATTRACTION OF METALS. PART 2: HIGH ELECTRICAL CONDUCTANCE METALS
von: Batygin, Yu. V., et al.
Veröffentlicht: (2019)
von: Batygin, Yu. V., et al.
Veröffentlicht: (2019)
Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
von: Gnatov, A. V.
Veröffentlicht: (2012)
von: Gnatov, A. V.
Veröffentlicht: (2012)
Developing and investigating coating for protection from fretting-corrosion
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
Developing and investigating coating for protection from fretting-corrosion
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
Optimal combining of seismic data with different spectral characteristics
von: Tyapkin, Yu. K.
Veröffentlicht: (2019)
von: Tyapkin, Yu. K.
Veröffentlicht: (2019)
Calculation of the damage area in anticorrosion coating of the pipeline section according to the data of electric measurements
von: Lukovich, V. V., et al.
Veröffentlicht: (2012)
von: Lukovich, V. V., et al.
Veröffentlicht: (2012)
OPTIMIZATION TASKS OF THE COMBINED ENERGY SYSTEMS BY ECONOMIC INDICATORS
von: Kuznietsov, M., et al.
Veröffentlicht: (2019)
von: Kuznietsov, M., et al.
Veröffentlicht: (2019)
TO OPTIMAL COMBINATION OF WIND AND SOLAR ELECTRICITY
von: Kuznietsov, M., et al.
Veröffentlicht: (2019)
von: Kuznietsov, M., et al.
Veröffentlicht: (2019)
ОСОБЛИВОСТІ ЕЛЕКТРООСАДЖЕННЯ СПЛАВА КОБАЛЬТ–ВОЛЬФРАМ–РЕНІЙ
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
Equipment and technology of anticorrosion
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2017)
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2017)
RESEARCH INTO ELECTROMAGNETIC PROCESSES IN A COMBINED CYLINDRICAL-TYPE MATCHING DEVICE WITH A MASSIVE SINGLE-TURN INDUCTOR
von: Trunova, I. S.
Veröffentlicht: (2013)
von: Trunova, I. S.
Veröffentlicht: (2013)
Development of Anticorrosic Technical Detergents
von: H. M. Prokofieva, et al.
Veröffentlicht: (2018)
von: H. M. Prokofieva, et al.
Veröffentlicht: (2018)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: M. M. Fridman
Veröffentlicht: (2019)
von: M. M. Fridman
Veröffentlicht: (2019)
Multi-objective optimal power flow based gray wolf optimization method
von: Mezhoud, N., et al.
Veröffentlicht: (2022)
von: Mezhoud, N., et al.
Veröffentlicht: (2022)
Нанокомпозиційні покриття для захисту від зношування в умовах високих температур
von: Shchepetov, Vitalii, et al.
Veröffentlicht: (2024)
von: Shchepetov, Vitalii, et al.
Veröffentlicht: (2024)
Corrosion. Corrosion protection of metals
von: N. R. Chervinska
Veröffentlicht: (2018)
von: N. R. Chervinska
Veröffentlicht: (2018)
Corrosion. Corrosion protection of metals
von: N. R. Chervinska
Veröffentlicht: (2017)
von: N. R. Chervinska
Veröffentlicht: (2017)
Reducing the toxicity level of wood burning products during evacuation of people
von: Tsapko, Yuriy, et al.
Veröffentlicht: (2025)
von: Tsapko, Yuriy, et al.
Veröffentlicht: (2025)
Effective parameters of dielectric absorption of polymeric insulation with semiconductor coatings of power high voltage cables
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2022)
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2022)
День народження
von: Сьомін, М.
Veröffentlicht: (1996)
von: Сьомін, М.
Veröffentlicht: (1996)
Thermodynamic approach to purposeful design of synergistic inhibitive compositions for corrosion protection in aqueous saline medium
von: V. Ledovskykh, et al.
Veröffentlicht: (2018)
von: V. Ledovskykh, et al.
Veröffentlicht: (2018)
The electric field in the vicinity of the damage to the pipeline's anticorrosive cover
von: Lukovich, V. V.
Veröffentlicht: (2011)
von: Lukovich, V. V.
Veröffentlicht: (2011)
EFFICIENCY OF APPLICATION OF SEMICONDUCTIVE COATINGS FOR REGULATION OF ELECTRIC FIELD IN HIGH-VOLTAGE INSULATION OF ELECTRIC MACHINES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017) -
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018) -
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018) -
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019) -
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)