New Generation 'Block-Modular' Condenser for K-1000-60 / 1500-2 Turbine Units in Zaporozhskaya NPP
The condensing devices of steam turbine plants considerably determine the reliable and economical operation of NPP power units. In some cases, breakdowns in their operation result in a forced decrease in the electric capacity of the power unit and a decline in the reliability, as well as in a signif...
Gespeichert in:
| Datum: | 2018 |
|---|---|
| Hauptverfasser: | Uss, A. N., Patsiuk, S. T., Panchenko, A. V., Shavlakov, A. V., Kharlampidi, D. Kh. |
| Format: | Artikel |
| Sprache: | Englisch Russisch Ukrainisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2018
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/127697 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
New Generation 'Block-Modular' Condenser for K-1000-60 / 1500-2 Turbine Units in Zaporozhskaya NPP
von: Uss, A. N., et al.
Veröffentlicht: (2018)
von: Uss, A. N., et al.
Veröffentlicht: (2018)
An Analysis of Thermodynamic Characteristics of Metal-Hydride Systems for Hydrogen Storage, Using a Modified Scheme of the Perturbation Theory
von: Solovei, Viktor V., et al.
Veröffentlicht: (2019)
von: Solovei, Viktor V., et al.
Veröffentlicht: (2019)
An Analysis of Thermodynamic Characteristics of Metal-Hydride Systems for Hydrogen Storage, Using a Modified Scheme of the Perturbation Theory
von: Solovei, Viktor V., et al.
Veröffentlicht: (2019)
von: Solovei, Viktor V., et al.
Veröffentlicht: (2019)
Metal Hydride Technology of Hydrogen Activation
von: Solovei, V. V., et al.
Veröffentlicht: (2018)
von: Solovei, V. V., et al.
Veröffentlicht: (2018)
Numerical Simulation of Metal Hydride Battery Heat Conducting Matrix Heat-stressed and Deformed State
von: Avramenko, Andrey N., et al.
Veröffentlicht: (2018)
von: Avramenko, Andrey N., et al.
Veröffentlicht: (2018)
Numerical Simulation of Metal Hydride Battery Heat Conducting Matrix Heat-stressed and Deformed State
von: Avramenko, Andrey N., et al.
Veröffentlicht: (2018)
von: Avramenko, Andrey N., et al.
Veröffentlicht: (2018)
Metal Hydride Technology of Hydrogen Activation
von: Solovei, V. V., et al.
Veröffentlicht: (2018)
von: Solovei, V. V., et al.
Veröffentlicht: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
USE OF GEOTHERMAL COOLING BY AIR CONDITIONING SYSTEMS AS A MEANS OF REDUCING THE LOAD ON POWER SUPPLY SYSTEMS IN THE WARM SEASON
von: Lysak , O.
Veröffentlicht: (2025)
von: Lysak , O.
Veröffentlicht: (2025)
PERFORMANCE ANALYSIS OF A HYBRID SOLAR FLAT PLATE PVT MODULE USING AL2O3/ZNO NANOFLUID
von: Kuppusamy , S., et al.
Veröffentlicht: (2025)
von: Kuppusamy , S., et al.
Veröffentlicht: (2025)
EXPLOSION BRECCIAS – LITHOGEODYNAMIC INDICATOR OF INITIAL STAGE OF SALT DIAPIRISM
von: Lukin, A.E., et al.
Veröffentlicht: (2015)
von: Lukin, A.E., et al.
Veröffentlicht: (2015)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Technological and operating features of the AR-1000 reactors Generation III+ and small modular reactors MR-160
von: Vashchenko, Volodymyr, et al.
Veröffentlicht: (2021)
von: Vashchenko, Volodymyr, et al.
Veröffentlicht: (2021)
APPLIED METHODOLOGY OF COMPLEX APPLICATION OF FREE COOLING AND HEAT PUMP TECHNOLOGIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)
von: Perepelytsia , I., et al.
Veröffentlicht: (2024)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
ОСОБЛИВОСТІ ЕЛЕКТРООСАДЖЕННЯ СПЛАВА КОБАЛЬТ–ВОЛЬФРАМ–РЕНІЙ
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
From new geological paradigm to the problems of regional geological-geophysical survey
von: Lukin, A., et al.
Veröffentlicht: (2018)
von: Lukin, A., et al.
Veröffentlicht: (2018)
Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
von: Kuchynskyi, K. A., et al.
Veröffentlicht: (2023)
DEVELOPMENT OF A SYSTEM FOR GENERATING HEAT AND COLD FOR THE NEEDS OF PHARMACEUTICAL COMPANIES
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)
von: Perepelytsia , I., et al.
Veröffentlicht: (2025)
TECHNOLOGICAL PARAMETERS OF THE COOLING MODE OF POLYMER INSULATION OF POWER CABLES
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2019)
COMPUTER MODELING ANALYSIS OF PHOTOVOLTAIC (PV) MODULES WITHOUT AND WITH INTEGRATED COOLING SYSTEMS
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)
von: Axtamov , T. Z., et al.
Veröffentlicht: (2025)
Термодинамічне дослідження морфоліній 2-((4-(2-метоксифеніл)-5-(піридиніл)-4H-1,2,4-триазол-3-іл)тіо)ацетату та його технологічних домішок в умовах гідрофільної хроматографії
von: Varynskyi, B. O.
Veröffentlicht: (2020)
von: Varynskyi, B. O.
Veröffentlicht: (2020)
ВЗАЄМОДІЯ ОКСИДІВ ЛАНТАНУ ТА ЛЮТЕЦІЮ ПРИ ТЕМПЕРАТУРІ 1500-1600 °С
von: Chudinovych , Olga, et al.
Veröffentlicht: (2020)
von: Chudinovych , Olga, et al.
Veröffentlicht: (2020)
Review of research on using hydrogen fuel in an ecologically pure internal combustion engine
von: Пилипенко, С. О.
Veröffentlicht: (2015)
von: Пилипенко, С. О.
Veröffentlicht: (2015)
Review of research on using hydrogen fuel in an ecologically pure internal combustion engine
von: Пилипенко, С. О.
Veröffentlicht: (2015)
von: Пилипенко, С. О.
Veröffentlicht: (2015)
CRYOGENIC RECEIVING FOCAL UNIT FOR TELESCOPES OF RADIOINTERFEROMETRIC COMPLEX OF NEW GENERATION
von: Ipatov, A. B., et al.
Veröffentlicht: (2014)
von: Ipatov, A. B., et al.
Veröffentlicht: (2014)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
Influence of Lubricating-Cooling Technological Media on Metal Destruction During Cutting
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
von: Soshko, Oleksandr I., et al.
Veröffentlicht: (2019)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
Diagonal torsion matrices associated with modular data
von: Singh, G.
Veröffentlicht: (2021)
von: Singh, G.
Veröffentlicht: (2021)
Ähnliche Einträge
-
New Generation 'Block-Modular' Condenser for K-1000-60 / 1500-2 Turbine Units in Zaporozhskaya NPP
von: Uss, A. N., et al.
Veröffentlicht: (2018) -
An Analysis of Thermodynamic Characteristics of Metal-Hydride Systems for Hydrogen Storage, Using a Modified Scheme of the Perturbation Theory
von: Solovei, Viktor V., et al.
Veröffentlicht: (2019) -
An Analysis of Thermodynamic Characteristics of Metal-Hydride Systems for Hydrogen Storage, Using a Modified Scheme of the Perturbation Theory
von: Solovei, Viktor V., et al.
Veröffentlicht: (2019) -
Metal Hydride Technology of Hydrogen Activation
von: Solovei, V. V., et al.
Veröffentlicht: (2018) -
Numerical Simulation of Metal Hydride Battery Heat Conducting Matrix Heat-stressed and Deformed State
von: Avramenko, Andrey N., et al.
Veröffentlicht: (2018)