Buchumschlag

Roller Forming Unit Dynamic Analysis with Energy Balanced Drive Dissipative Properties Taken into Account

In order to increase the reliability and durability of a roller forming unit with an energy-balanced drive, loads in the unit structure elements and drive are calculated, dependencies for identifying efforts in the connecting rods, necessary for setting the forming trolleys in reciprocating movement...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2018
Hauptverfasser:	Loveikin, V. S., Pochka, K. I., Romasevych, Yu. O.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2018
Schlagworte:	roll forming unit drive force moment rigidity dissipation UDC 693.546
Online Zugang:	https://journals.uran.ua/jme/article/view/135427
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Roller Forming Unit Dynamic Analysis with Energy Balanced Drive Dissipative Properties Taken into Account
von: Loveikin, V. S., et al.
Veröffentlicht: (2018)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V. S., et al.
Veröffentlicht: (2019)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V. S., et al.
Veröffentlicht: (2019)

Roller Forming Unit Dynamic Analysis with Energy Balanced Drive Dissipative Properties Taken into Account
von: V. S. Loveikin, et al.
Veröffentlicht: (2018)

STRUCTURAL-PARAMETRIC SYNTHESIS OF ROLLING MILLS MULTI-MOTOR ELECTRIC DRIVES
von: Kuznetsov, B. I., et al.
Veröffentlicht: (2020)

Traction electric drive based on fuel cell batteries and on-board inertial energy storage for multi unit train
von: Omelyanenko, V. I., et al.
Veröffentlicht: (2021)

MATHEMATICAL MODEL OF THE EMC DISCHARGE PROCESS SOLUTION IN ALONE STATE WIND TURBINE WITH ELECTRODYNAMIC PUMP DRIVER
von: Holovko, V., et al.
Veröffentlicht: (2019)

THE LAW OF ELECTROMAGNETIC FORCE
von: Kutkovetskyy, V. J.
Veröffentlicht: (2014)

DEVELOPMENT TRENDS FOR ROLLING STOCK TRACTION MOTORS
von: Ustenko, A. V., et al.
Veröffentlicht: (2013)

SYNTHESIS OF A TWO-MASS ELECTRIC DRIVE WITH AN ASTATIC SYSTEM OF SUBORDINATE REGULATION AT THE ACTION OF VARIABLE FRICTION FORCES
von: Zadorozhniaia, I. N., et al.
Veröffentlicht: (2018)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2016)

STABILIZATION OF PARAMETERS OF ASYNCHRONOUS ELECTRIC DRIVE WITH VECTOR CONTROL
von: Khlopenko, N. J., et al.
Veröffentlicht: (2015)

Microprocessor control system of the electroontact surfacing with two roller electrodes
von: Чепель, Юлия Анатолиевна, et al.
Veröffentlicht: (2014)

Microprocessor control system of the electroontact surfacing with two roller electrodes
von: Чепель, Юлия Анатолиевна, et al.
Veröffentlicht: (2014)

Analysis of suitable converter for the implementation of drive system in solar photovoltaic panels
von: Themozhi, G., et al.
Veröffentlicht: (2024)

Strip rolling process stability estimation by the torque in the rollers driving line
von: V. V. Verenev, et al.
Veröffentlicht: (2013)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Forth-Order Acceleration
von: Loveykin, V.S., et al.
Veröffentlicht: (2019)

Substantiation of Boundary Accelerations of Roller Forming Unit Optimal Reversal Mode According to Fourth-Order Acceleration
von: V. S. Loveykin, et al.
Veröffentlicht: (2019)

Methodological approaches to rationing of unit costs of energy resources within the government-financed institutions
von: Maliarenko O.Ye., et al.
Veröffentlicht: (2011)

POWER CHARACTERISTICS OF A VIBRATOR WITH A LINEAR NONSALIENT-POLE ARMATURE MOTOR DRIVE
von: Bondar, R. P.
Veröffentlicht: (2014)

CAST-FILM POLYMER COMPOSITION DOSING SYSTEM DRIVE CONTROL
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2014)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Investigation of a three-phase-single-phase induction electric drive under stochastic loads
von: Shurub, Yu. V.
Veröffentlicht: (2014)

STATISTICAL OPTIMIZATION OF FREQUENCY REGULATED INDUCTION ELECTRIC DRIVES WITH SCALAR CONTROL
von: Shurub, Yu. V.
Veröffentlicht: (2017)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Improvement of technical processes for producing cast rotor parts to increase performance characteristics of traction elecric drive
von: Акімов, Олег Вікторович
Veröffentlicht: (2014)

Analysis of the strategies for managing extended-range electric vehicle powertrain in the urban driving cycle
von: Lasocki, J., et al.
Veröffentlicht: (2022)

Mathematical modelling of transients in the electric drive of the turnout of the mono-sleeper type with switched-inductor motor
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2021)

RADAR DETERMINATION OF SHIP ROLL PERIOD IN ROUGH SEAS
von: Gorobets, V. N., et al.
Veröffentlicht: (2025)

Mathematical modeling and analysis of WPP’s rotating parts inertia moment’s influence upon frequency controlling process
von: Dryomin I.V.
Veröffentlicht: (2014)

SIMULATION OF AN AC DRIVE SYSTEM COMPRISING A CASCADE MULTILEVEL VOLTAGE INVERTER
von: Zhemerov, George G., et al.
Veröffentlicht: (2013)

SIMULATION OF A HIGH-POWERED VARIABLE FREQUENCY AC DRIVE BASED ON A MULTIPULSE CURRENT SOURCE INVERTER
von: Zhemerov, George G., et al.
Veröffentlicht: (2013)

CALCULATION AND DESIGN OF A ROBUST SPEED CONTROLLER OF A FREQUENCY-CONTROLLED INDUCTION ELECTRIC DRIVE
von: Khlopenko, N. J.
Veröffentlicht: (2020)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

MATHEMATICAL MODELLING OF TRANSIENTS IN THE ELECTRIC DRIVE OF THE SWITCH – THE MAIN EXECUTIVE ELEMENT OF RAILWAY AUTOMATION
von: Buriakovskyi, S. G., et al.
Veröffentlicht: (2020)

COMPARISON OF CONVERTER SYSTEMS FOR A HIGH-VOLTAGE VARIABLE-FREQUENCY AC DRIVE
von: Zhemerov, George G., et al.
Veröffentlicht: (2013)

Сyclotron wave absorption in D-shaped tokamaks
von: Grishanov, N.I., et al.
Veröffentlicht: (2016)

Lower hybrid resonance: field structure and numerical modeling
von: Moiseenko, V.E., et al.
Veröffentlicht: (2016)

High energetic electron distribution tails for nonlinear collisional kinetic equation in the presence of heating
von: Potapenko, I.F., et al.
Veröffentlicht: (2008)