Application of pulse technologies in the welding of structural steels
The results of studies of technological capabilities of the process of pulse-arc welding of structural steels, including the use of flux-cored wires, are given in the paper. The raised level of metal losses on waste and sputter leads not only to the welding wire over-expenditure, but also to the wel...
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2014
|
| Теми: | |
| Онлайн доступ: | https://journals.uran.ua/jme/article/view/19918 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Репозитарії
Energy Technologies & Resource Saving| id |
oai:ojs.journals.uran.ua:article-19918 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs.journals.uran.ua:article-199182025-12-02T15:24:11Z Application of pulse technologies in the welding of structural steels Применение импульсных технологий при сварке конструкционных сталей Застосування імпульсних технологій при зварюванні конструкційних сталей Жерносеков, Анатолий Максимович Сидорец, Владимир Николаевич Приходько, Виталий Викторович welding arc sputter steel pulse control УДК 621.791 сварка дуга разбрызгивание сталь импульс регулирование УДК 621.791 зварювання дуга розбризкування сталь імпульс регулювання УДК 621.791 The results of studies of technological capabilities of the process of pulse-arc welding of structural steels, including the use of flux-cored wires, are given in the paper. The raised level of metal losses on waste and sputter leads not only to the welding wire over-expenditure, but also to the welding torch nozzle choking, gas protection deterioration, sputters pickup on the work piece. Application of pulse arc welding technologies allows the effective solution of a number of techno-logical problems.The studies on welding of pipe steel X60 were conducted. The proposed combined approach can have prospects in the welding of pipelines of large diameter and thickness, where the root weld is made without a magnetic blow by contact welding, and all subsequent layers are made by the pulse arc welding. For welding of the "hot" pass, following the root, the mixture of shielding gases of argon and carbon dioxide with the addition of helium can be used. The experimental studies at the pulse arc welding and surfacing of various flux-cored wires, including self-shielding wires, were conducted. The use of power supplies with the adjustable pulse shape of welding current allows to improve the efficiency of welding and surfacing with flux-cored wires. Представлены результаты исследований процесса импульсно-дуговой сварки плавящимся электродом конструкционных сталей, включая применение порошковых проволок. Показано, что применение импульсных технологий позволяет значительно уменьшить разбрызгивание металла. Установлено, что использование источников питания с регулируемой формой импульсов сварочного тока повышает эффективность процессов сварки и наплавки порошковыми проволоками, включая самозащитные. Представлені результати досліджень процесу імпульсно-дугового зварювання плавким електродом конструкційних сталей, включаючи застосування порошкових дротів. Показано, що застосування імпульсних технологій дозволяє значно зменшити розбризкування металу. Встановлено, що використання джерел живлення з регульованою формою імпульсів зварювального струму підвищує ефективність процесів зварювання та наплавлення порошковими дротами, включаючи самозахисні. Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014-01-10 Article Article application/pdf https://journals.uran.ua/jme/article/view/19918 Journal of Mechanical Engineering; Vol. 16 No. 5 (2013); 18-21 Проблемы машиностроения; Том 16 № 5 (2013); 18-21 Проблеми машинобудування; Том 16 № 5 (2013); 18-21 2709-2992 2709-2984 ru https://journals.uran.ua/jme/article/view/19918/36492 Copyright (c) 2015 Анатолий Максимович Жерносеков, Владимир Николаевич Сидорец, Виталий Викторович Приходько https://creativecommons.org/licenses/by-nd/4.0 |
| institution |
Energy Technologies & Resource Saving |
| baseUrl_str |
|
| datestamp_date |
2025-12-02T15:24:11Z |
| collection |
OJS |
| language |
Russian |
| topic |
welding arc sputter steel pulse control УДК 621.791 |
| spellingShingle |
welding arc sputter steel pulse control УДК 621.791 Жерносеков, Анатолий Максимович Сидорец, Владимир Николаевич Приходько, Виталий Викторович Application of pulse technologies in the welding of structural steels |
| topic_facet |
welding arc sputter steel pulse control УДК 621.791 сварка дуга разбрызгивание сталь импульс регулирование УДК 621.791 зварювання дуга розбризкування сталь імпульс регулювання УДК 621.791 |
| format |
Article |
| author |
Жерносеков, Анатолий Максимович Сидорец, Владимир Николаевич Приходько, Виталий Викторович |
| author_facet |
Жерносеков, Анатолий Максимович Сидорец, Владимир Николаевич Приходько, Виталий Викторович |
| author_sort |
Жерносеков, Анатолий Максимович |
| title |
Application of pulse technologies in the welding of structural steels |
| title_short |
Application of pulse technologies in the welding of structural steels |
| title_full |
Application of pulse technologies in the welding of structural steels |
| title_fullStr |
Application of pulse technologies in the welding of structural steels |
| title_full_unstemmed |
Application of pulse technologies in the welding of structural steels |
| title_sort |
application of pulse technologies in the welding of structural steels |
| title_alt |
Применение импульсных технологий при сварке конструкционных сталей Застосування імпульсних технологій при зварюванні конструкційних сталей |
| description |
The results of studies of technological capabilities of the process of pulse-arc welding of structural steels, including the use of flux-cored wires, are given in the paper. The raised level of metal losses on waste and sputter leads not only to the welding wire over-expenditure, but also to the welding torch nozzle choking, gas protection deterioration, sputters pickup on the work piece. Application of pulse arc welding technologies allows the effective solution of a number of techno-logical problems.The studies on welding of pipe steel X60 were conducted. The proposed combined approach can have prospects in the welding of pipelines of large diameter and thickness, where the root weld is made without a magnetic blow by contact welding, and all subsequent layers are made by the pulse arc welding. For welding of the "hot" pass, following the root, the mixture of shielding gases of argon and carbon dioxide with the addition of helium can be used. The experimental studies at the pulse arc welding and surfacing of various flux-cored wires, including self-shielding wires, were conducted. The use of power supplies with the adjustable pulse shape of welding current allows to improve the efficiency of welding and surfacing with flux-cored wires. |
| publisher |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України |
| publishDate |
2014 |
| url |
https://journals.uran.ua/jme/article/view/19918 |
| work_keys_str_mv |
AT žernosekovanatolijmaksimovič applicationofpulsetechnologiesintheweldingofstructuralsteels AT sidorecvladimirnikolaevič applicationofpulsetechnologiesintheweldingofstructuralsteels AT prihodʹkovitalijviktorovič applicationofpulsetechnologiesintheweldingofstructuralsteels AT žernosekovanatolijmaksimovič primenenieimpulʹsnyhtehnologijprisvarkekonstrukcionnyhstalej AT sidorecvladimirnikolaevič primenenieimpulʹsnyhtehnologijprisvarkekonstrukcionnyhstalej AT prihodʹkovitalijviktorovič primenenieimpulʹsnyhtehnologijprisvarkekonstrukcionnyhstalej AT žernosekovanatolijmaksimovič zastosuvannâímpulʹsnihtehnologíjprizvarûvanníkonstrukcíjnihstalej AT sidorecvladimirnikolaevič zastosuvannâímpulʹsnihtehnologíjprizvarûvanníkonstrukcíjnihstalej AT prihodʹkovitalijviktorovič zastosuvannâímpulʹsnihtehnologíjprizvarûvanníkonstrukcíjnihstalej |
| first_indexed |
2025-07-17T11:58:46Z |
| last_indexed |
2025-12-02T15:25:05Z |
| _version_ |
1850410643445776384 |