Buchumschlag

Application of pulse technologies in the welding of structural steels

The results of studies of technological capabilities of the process of pulse-arc welding of structural steels, including the use of flux-cored wires, are given in the paper. The raised level of metal losses on waste and sputter leads not only to the welding wire over-expenditure, but also to the wel...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Жерносеков, Анатолий Максимович, Сидорец, Владимир Николаевич, Приходько, Виталий Викторович
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Schlagworte:	welding arc sputter steel pulse control УДК 621.791
Online Zugang:	https://journals.uran.ua/jme/article/view/19918
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Application of pulse technologies in the welding of structural steels
von: Жерносеков, Анатолий Максимович, et al.
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)

FEATURES OF ELECTRODE MELTING IN ARC WELDING OF STEELS
von: Sydorets, V. N., et al.
Veröffentlicht: (2013)

Hygienic characteristics of welding methods and welding materials
von: Levchenko, Oleg, et al.
Veröffentlicht: (2025)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Hygienic assessment of magnetic fields in different methods of arc welding
von: Levchenko, Oleg H., et al.
Veröffentlicht: (2024)

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

Fetures of increase of productivity of welding an consumable electrode in gas shielded at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2014)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)

Experimental study of the formation of surface roughness of the sprayed ceramic layer on the necks of the rotor shafts of gas turbine
von: Лебедев, Владимир, et al.
Veröffentlicht: (2014)

CONTROL OF VALVE ELECTRIC DRIVE COORDINATES OF AUTOMATED WELDING EQUIPMENT FEED MECHANISMS
von: Lebedev, V. A., et al.
Veröffentlicht: (2020)

RESEARCH INTO METHODS OF PIPE END DEMAGNETIZATION UNDER MAIN PIPELINE REPAIR
von: Dobrodeyev, P. N.
Veröffentlicht: (2014)

AN ANTHOLOGY OF OUTSTANDING ACHIEVEMENTS IN SCIENCE AND TECHNOLOGY. PART 17: INVENTIONS IN MATERIAL WELDING
von: Baranov, M. I.
Veröffentlicht: (2013)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Features of the energy distribution in ultrasonic welding for microprism optical elements
von: Tоkalin, O. A.
Veröffentlicht: (2015)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Stress concentration in vertical tank weld seams
von: Uspenskiy, B. V., et al.
Veröffentlicht: (2019)

Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
von: Nechaev, A. V.
Veröffentlicht: (2019)

Experimental Study of the Effects of a Constant and Variable Electric Fields on the Strength Properties of the Blade Steel Surface Layer
von: Nechaev, A. V.
Veröffentlicht: (2019)

Neural network modeling of critical tempe-ratures for steel pitting.
von: Korniienko, O. V., et al.
Veröffentlicht: (2019)

Features of the ultrasonic welding of optical mikroprismatic elements wih a dosing of energy
von: Britsky, A. I., et al.
Veröffentlicht: (2016)

On the solution of the problem of synthesis of the control system for the process of dosed feed of electrode wire for arc welding equipment
von: Lebedev, V.A.
Veröffentlicht: (2021)

CALCULATION AND EXPERIMENTAL ESTIMATION OF RESULTS OF ELECTRO-THERMAL ACTION OF RATIONED BY THE INTERNATIONAL STANDARD IEC 62305-1-2010 IMPULSE CURRENT OF SHORT BLOW OF ARTIFICIAL LIGHTNING ON THE THIN-WALLED COVERAGE FROM STAINLESS STEEL
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

RESULTS OF CALCULATION-EXPERIMENTAL INVESTIGATIONS OF ELECTRO-THERMAL RESISTIBILITY OF SHEET STEEL SAMPLES TO ACTION OF RATIONED COMPONENTS OF PULSED CURRENT OF ARTIFICIAL LIGHTNING
von: Baranov, M. I., et al.
Veröffentlicht: (2016)

Surface microhardness of stainless steel which are modified by ionic implantation
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)

Surface microhardness of stainless steel which are modified by ionic implantation
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)

MODELING PARAMETERS OF ARC OF ELECTRIC ARC FURNACE
von: Khrestin, R. N.
Veröffentlicht: (2015)

A DETERMINATION OF THE FLUX DENSITY IN CORE OF DISTRIBUTION TRANSFORMERS, WHAT BUILT WITH THE COMMON USING OF GRAIN AND NON GRAIN ORIENTED MAGNETIC STEELS
von: Pentegov, I. V., et al.
Veröffentlicht: (2015)

APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
von: Baranov, M. I., et al.
Veröffentlicht: (2017)

Methodology for forest loss assessment using GIS technologies
von: Horelyk, Stanislav, et al.
Veröffentlicht: (2023)

Simulation of ion-atom interactions at the corpuscular bombardment of the surface of steel samples
von: Гончаров, Виталий Викторович, et al.
Veröffentlicht: (2014)

Simulation of ion-atom interactions at the corpuscular bombardment of the surface of steel samples
von: Гончаров, Виталий Викторович, et al.
Veröffentlicht: (2014)

DESIGN AND TECHNOLOGICAL PROPOSALS FOR IMPROVING A SINGLE-PHASE TRANSFORMER WITH LAMINATED MAGNETIC CORE
von: Stavinskiy, A. A., et al.
Veröffentlicht: (2020)

Effect of Varying Heat Treatment Regimes on Microstructure and Mechanical Properties of P92 Steel Welds
von: Pal, Vinay Kumar, et al.
Veröffentlicht: (2022)

Effect of Varying Heat Treatment Regimes on Microstructure and Mechanical Properties of P92 Steel Welds
von: Pal, Vinay Kumar, et al.
Veröffentlicht: (2022)

NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
von: Levin, M. I., et al.
Veröffentlicht: (2015)

REFINED MODELLING OF INDUCTION MACHINES OF RENEWABLE ENERGY SYSTEMS WITH CHANGES IN THE DEGREE OF LOAD
von: Popovych , O., et al.
Veröffentlicht: (2025)