Cover Image

Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions

The results of the research on mathematical modeling in the problems of searching the optimal final state control of alloys obtaining processes for vital parts of power engineering are described in the paper. The mathematical description of the control object is proposed. It was shown, which paramet...

Full description

Saved in:

Bibliographic Details
Date:	2014
Main Author:	Demin, Dmitriy
Format:	Article
Language:	Russian
Published:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Subjects:	mathematical model control power engineering alloy reliability УДК 681.5 519.24
Online Access:	https://journals.uran.ua/jme/article/view/19919
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Similar Items

Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
by: Demin, Dmitriy
Published: (2014)

Mathematical modeling in the problem of selecting opti-mal control of obtaining alloys for machine parts in un-certainty conditions
by: Дёмин, Дмитрий Александрович
Published: (2015)

Mathematical modeling in the problem of selecting opti-mal control of obtaining alloys for machine parts in un-certainty conditions
by: Дёмин, Дмитрий Александрович
Published: (2015)

The search criterion of singularity points of R-functions
by: Чопоров, С. В., et al.
Published: (2016)

The search criterion of singularity points of R-functions
by: Чопоров, С. В., et al.
Published: (2016)

STRUCTURAL SYNTHESIS OF A STABILIZING ROBUST CONTROLLER OF THE ROTOR FLUX LINKAGE
by: Khlopenko, N. J., et al.
Published: (2017)

Vibration features of titanium alloy blades with erosive damages
by: Vorobiov, Yu. S., et al.
Published: (2019)

Vibration features of titanium alloy blades with erosive damages
by: Vorobiov, Yu. S., et al.
Published: (2019)

Model of two-component system with component deactivation by hidden failure control
by: Обжерин, Юрий Евгеньевич, et al.
Published: (2014)

Model of two-component system with component deactivation by hidden failure control
by: Обжерин, Юрий Евгеньевич, et al.
Published: (2014)

ANALYSIS AND STUDY OF AMORPHOUS ALLOYS PROPERTIES
by: Pavlenko, T. P., et al.
Published: (2013)

Optimal design of tubularbar structures subjected to corrosion
by: Фридман, М. М.
Published: (2016)

Optimal design of tubularbar structures subjected to corrosion
by: Фридман, М. М.
Published: (2016)

Hydrogen-sorption properties, thermal stability and kinetics of hydrogen desorption from the MgH2 phase of the mechanical alloy of Mg with Si, Ti, Fe
by: Ershova, O., et al.
Published: (2018)

Evolutional method application for gas turbine engine unite parameters estimation on the base of measuring data by the operational process
by: Угрюмова, Е. М., et al.
Published: (2017)

Evolutional method application for gas turbine engine unite parameters estimation on the base of measuring data by the operational process
by: Угрюмова, Е. М., et al.
Published: (2017)

Thermal deformation of iron-carbon alloys and its influence on the diagramme of FE-C state
by: Мацишин, Сергій Олегович, et al.
Published: (2014)

Thermal deformation of iron-carbon alloys and its influence on the diagramme of FE-C state
by: Мацишин, Сергій Олегович, et al.
Published: (2014)

MICROALLOYING AND MODIFICATION OF CAST ALUMINUM ALLOYS FOR INCREASING THEIR LEVEL OF EXPLOITATION PROPERTIES AT ELEVATED TEMPERATURES. A REVIEW: Processy litʹâ, 2021, Tom 145, №3 p. 61-68
by: Voron, M. M., et al.
Published: (2021)

A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
by: Somka, O. O., et al.
Published: (2015)

THERMAL STABILITY AND KINETICS OF HYDROGEN DESORPTION FROM THE HYDRIDE PHASE OF THE MgH2 OF A MECHANICAL ALLOY OF MAGNESI-UM WITH Si, Ti, Fe
by: Ershova, O., et al.
Published: (2019)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
by: Somka, O. O., et al.
Published: (2014)

THE EFFECT OF Fe AND Y ON THE HYDROGEN SORPTION PROPERTIES, THERMAL STABILITY, AND KINETICS OF HYDROGEN DESORPTION FROM THE MgH2 HYDRIDE PHASE OF A MECHANICAL ALLOY Mg + 10%wt.Fe + 5%wt.Y
by: Ershova, О., et al.
Published: (2020)

An optimization problem of packing identical circles into a multiply connected region. Part 1. A mathematical model and its characteristics
by: Stoyan, Yu. G., et al.
Published: (2016)

An optimization problem of packing identical circles into a multiply connected region. Part 1. A mathematical model and its characteristics
by: Stoyan, Yu. G., et al.
Published: (2016)

Fault-tolerant control of a double star induction machine operating in active redundancy
by: Guizani, S., et al.
Published: (2025)

ОСОБЛИВОСТІ ЕЛЕКТРООСАДЖЕННЯ СПЛАВА КОБАЛЬТ–ВОЛЬФРАМ–РЕНІЙ
by: Yapontseva, Yuliya, et al.
Published: (2019)

OPTIMIZATION TASKS OF THE COMBINED ENERGY SYSTEMS BY ECONOMIC INDICATORS
by: Kuznietsov, M., et al.
Published: (2019)

Express-evaluation of the resonance frequencies of machine components by the method of oscillating frequency
by: Божко, A. Е., et al.
Published: (2015)

Express-evaluation of the resonance frequencies of machine components by the method of oscillating frequency
by: Божко, A. Е., et al.
Published: (2015)

Optimization and reliability of the power supply systems of a compressor station
by: Benchouia , N., et al.
Published: (2021)

Algorithmization of the decision of magneto-elasticity thin bodies problems with the help of the R-functions method
by: Назиров, Ш. А., et al.
Published: (2016)

Algorithmization of the decision of magneto-elasticity thin bodies problems with the help of the R-functions method
by: Назиров, Ш. А., et al.
Published: (2016)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
by: Планковский, С. И., et al.
Published: (2016)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
by: Планковский, С. И., et al.
Published: (2016)

Optimal power flow analysis under photovoltaic and wind power uncertainties using the blood-sucking leech optimizer
by: Bouhadouza, B., et al.
Published: (2025)

Magnetic Properties of Mesoporous Nanocomposites on the Base of Cobalt
by: Bagriychuk, A. S., et al.
Published: (2014)

One approach to a search for good local minimum of a packing problem of cylindrical object
by: Чугай, А. М.
Published: (2014)

One approach to a search for good local minimum of a packing problem of cylindrical object
by: Чугай, А. М.
Published: (2014)

Mathematical modeling of the magnetic cleaning liquids from multicomponent pollution
by: Бомба, А. Я., et al.
Published: (2016)