Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture
The purpose of the paper was to study the influence of technological parameters of carbonitriding in macrodispersed powder on the properties of structural steel 40X. The problem was solved by finding the optimum temperature and time of treatment. For the estimation of the parameters, typical for the...
Gespeichert in:
| Datum: | 2014 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2014
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/19924 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource Saving| id |
oai:ojs.journals.uran.ua:article-19924 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs.journals.uran.ua:article-199242025-12-02T15:24:12Z Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture Повышение долговечности деталей энергетического машиностроения методом нитроцементации в макродисперсной смеси Підвищення довговічність деталей енергетичного машинобудування методом нітроцементації в макродисперсній суміші Костик, Катерина carbonitriding steel diffusion layer depth surface microhardness diffusion УДК 621.785.53 нитроцементация сталь глубина диффузионного слоя микротвердость поверхности диффузия УДК 621.785.53 нітроцементація сталь глибина дифузійного шару мікротвердість поверхні дифузія УДК 621.785.53 The purpose of the paper was to study the influence of technological parameters of carbonitriding in macrodispersed powder on the properties of structural steel 40X. The problem was solved by finding the optimum temperature and time of treatment. For the estimation of the parameters, typical for the diffusion layers, the study of the influence of carbonitriding time and temperature on the depth and hardness of the hardened layer was used. Based on the studies, the optimal temperature of 40X steel carbonitriding, corresponding to550°C, which provides the greatest thickness of the diffusion layer (0.5 mm) at a high surface hardness (800 MPa) was selected and justified. The analysis of experimental data showed that the best ratio of surface hardness and depth of the carbonitrided layer is achieved by the exposure for 5 hours. The coefficients of nitrogen diffusion in steel for the proposed saturation method were calculated. The new method of low-temperature carbonitriding, allowing to carry out the treatment in the box furnace just in 5 hours with obtaining of sufficient diffusion layers was pro-posed. The practical significance of this paper lies in the fact that the application of the proposed carbonitriding method allows significant reduction of the thermochemical treatment duration. Исследовано влияние технологических параметров низкотемпературной нитроцементации в карбо- и азотосодержащем макродисперсном порошке на упрочнение поверхностного слоя стали 40Х. Определено оптимальные температура и время обработки. Рассчитаны коэффициенты диффузии азота в стали для предложенного метода насыщения. Досліджено вплив технологічних параметрів низькотемпературної нітроцементації в карбо- та азотовмісному макродисперсному порошку на зміцнення поверхневого шару сталі 40Х. Визначено оптимальні температура та тривалість обробки. Розраховані коефіцієнти дифузії азоту в сталі для запропонованого методу насичення. Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014-01-10 Article Article application/pdf https://journals.uran.ua/jme/article/view/19924 Journal of Mechanical Engineering; Vol. 16 No. 5 (2013); 50-55 Проблемы машиностроения; Том 16 № 5 (2013); 50-55 Проблеми машинобудування; Том 16 № 5 (2013); 50-55 2709-2992 2709-2984 uk https://journals.uran.ua/jme/article/view/19924/36498 Copyright (c) 2015 Катерина Костик https://creativecommons.org/licenses/by-nd/4.0 |
| institution |
Energy Technologies & Resource Saving |
| baseUrl_str |
|
| datestamp_date |
2025-12-02T15:24:12Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
carbonitriding steel diffusion layer depth surface microhardness diffusion УДК 621.785.53 |
| spellingShingle |
carbonitriding steel diffusion layer depth surface microhardness diffusion УДК 621.785.53 Костик, Катерина Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| topic_facet |
carbonitriding steel diffusion layer depth surface microhardness diffusion УДК 621.785.53 нитроцементация сталь глубина диффузионного слоя микротвердость поверхности диффузия УДК 621.785.53 нітроцементація сталь глибина дифузійного шару мікротвердість поверхні дифузія УДК 621.785.53 |
| format |
Article |
| author |
Костик, Катерина |
| author_facet |
Костик, Катерина |
| author_sort |
Костик, Катерина |
| title |
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| title_short |
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| title_full |
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| title_fullStr |
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| title_full_unstemmed |
Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| title_sort |
increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture |
| title_alt |
Повышение долговечности деталей энергетического машиностроения методом нитроцементации в макродисперсной смеси Підвищення довговічність деталей енергетичного машинобудування методом нітроцементації в макродисперсній суміші |
| description |
The purpose of the paper was to study the influence of technological parameters of carbonitriding in macrodispersed powder on the properties of structural steel 40X. The problem was solved by finding the optimum temperature and time of treatment. For the estimation of the parameters, typical for the diffusion layers, the study of the influence of carbonitriding time and temperature on the depth and hardness of the hardened layer was used. Based on the studies, the optimal temperature of 40X steel carbonitriding, corresponding to550°C, which provides the greatest thickness of the diffusion layer (0.5 mm) at a high surface hardness (800 MPa) was selected and justified. The analysis of experimental data showed that the best ratio of surface hardness and depth of the carbonitrided layer is achieved by the exposure for 5 hours. The coefficients of nitrogen diffusion in steel for the proposed saturation method were calculated. The new method of low-temperature carbonitriding, allowing to carry out the treatment in the box furnace just in 5 hours with obtaining of sufficient diffusion layers was pro-posed. The practical significance of this paper lies in the fact that the application of the proposed carbonitriding method allows significant reduction of the thermochemical treatment duration. |
| publisher |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України |
| publishDate |
2014 |
| url |
https://journals.uran.ua/jme/article/view/19924 |
| work_keys_str_mv |
AT kostikkaterina increaseddurabilityofpowerengineeringpartstomethodofcarbonitridingonthemacrodispersedmixture AT kostikkaterina povyšeniedolgovečnostidetalejénergetičeskogomašinostroeniâmetodomnitrocementaciivmakrodispersnojsmesi AT kostikkaterina pídviŝennâdovgovíčnístʹdetalejenergetičnogomašinobuduvannâmetodomnítrocementacíívmakrodispersníjsumíší |
| first_indexed |
2025-07-17T11:58:49Z |
| last_indexed |
2025-12-02T15:25:22Z |
| _version_ |
1850410662013960192 |