Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
Operation of structures in high temperature conditions and aggressive environments leads to such phenomena as corrosion and material damage. Corrosion leads to a reduction in structural cross-section and, consequently, an increase in stresses. As to material damage, namely, the appearance of micro-c...
Збережено в:
| Дата: | 2020 |
|---|---|
| Автор: | Fridman, Мark M. |
| Формат: | Стаття |
| Мова: | Англійська Російська |
| Опубліковано: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2020
|
| Теми: | |
| Онлайн доступ: | https://journals.uran.ua/jme/article/view/214531 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Репозитарії
Energy Technologies & Resource SavingСхожі ресурси
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
за авторством: Fridman, Мark M.
Опубліковано: (2020)
за авторством: Fridman, Мark M.
Опубліковано: (2020)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
за авторством: Fridman, Мark M.
Опубліковано: (2019)
за авторством: Fridman, Мark M.
Опубліковано: (2019)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
за авторством: Fridman, Мark M.
Опубліковано: (2019)
за авторством: Fridman, Мark M.
Опубліковано: (2019)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
за авторством: Fridman, Mark M.
Опубліковано: (2018)
за авторством: Fridman, Mark M.
Опубліковано: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
за авторством: Fridman, Mark M.
Опубліковано: (2018)
за авторством: Fridman, Mark M.
Опубліковано: (2018)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
за авторством: Фридман, М. М.
Опубліковано: (2017)
за авторством: Фридман, М. М.
Опубліковано: (2017)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
за авторством: Фридман, М. М.
Опубліковано: (2017)
за авторством: Фридман, М. М.
Опубліковано: (2017)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
за авторством: M. M. Fridman
Опубліковано: (2020)
за авторством: M. M. Fridman
Опубліковано: (2020)
Optimal design of tubularbar structures subjected to corrosion
за авторством: Фридман, М. М.
Опубліковано: (2016)
за авторством: Фридман, М. М.
Опубліковано: (2016)
Optimal design of tubularbar structures subjected to corrosion
за авторством: Фридман, М. М.
Опубліковано: (2016)
за авторством: Фридман, М. М.
Опубліковано: (2016)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
за авторством: Biblik, Irina V., та інші
Опубліковано: (2018)
за авторством: Biblik, Irina V., та інші
Опубліковано: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
за авторством: Biblik, Irina V., та інші
Опубліковано: (2018)
за авторством: Biblik, Irina V., та інші
Опубліковано: (2018)
FUNCTIONAL DAMAGE OF RADIO ELECTRONIC SYSTEMS
за авторством: Chernogor, L. F.
Опубліковано: (2021)
за авторством: Chernogor, L. F.
Опубліковано: (2021)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2015)
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2015)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2015)
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2015)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
за авторством: Filatov, Heorhii V.
Опубліковано: (2020)
за авторством: Filatov, Heorhii V.
Опубліковано: (2020)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
за авторством: Filatov, Heorhii V.
Опубліковано: (2020)
за авторством: Filatov, Heorhii V.
Опубліковано: (2020)
Vibration features of titanium alloy blades with erosive damages
за авторством: Vorobiov, Yu. S., та інші
Опубліковано: (2019)
за авторством: Vorobiov, Yu. S., та інші
Опубліковано: (2019)
Vibration features of titanium alloy blades with erosive damages
за авторством: Vorobiov, Yu. S., та інші
Опубліковано: (2019)
за авторством: Vorobiov, Yu. S., та інші
Опубліковано: (2019)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
за авторством: Dehtiarov, Maksym O., та інші
Опубліковано: (2020)
за авторством: Dehtiarov, Maksym O., та інші
Опубліковано: (2020)
Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
за авторством: Dehtiarov, Maksym O., та інші
Опубліковано: (2020)
за авторством: Dehtiarov, Maksym O., та інші
Опубліковано: (2020)
Electromagnetic processes in an inductor system with a single thin round turn with a cut above a thin metal sheet
за авторством: Gnatov, A. V.
Опубліковано: (2012)
за авторством: Gnatov, A. V.
Опубліковано: (2012)
Justification of the advantages of using optical and radar remote sensing data in detecting buildings damaged by natural or anthropogenic impacts
за авторством: Skrypnyk, Liliia, та інші
Опубліковано: (2024)
за авторством: Skrypnyk, Liliia, та інші
Опубліковано: (2024)
Forest damage assessment of a part of Kupyansk forestry due to fires caused by military actions
за авторством: Popov, Mykhailo, та інші
Опубліковано: (2025)
за авторством: Popov, Mykhailo, та інші
Опубліковано: (2025)
Assessment of changes in the technical condition of damaged multi-story buildings by using artificial intelligence
за авторством: Berchun, Yaroslav, та інші
Опубліковано: (2025)
за авторством: Berchun, Yaroslav, та інші
Опубліковано: (2025)
Mathematical modeling of damage accumulation under conditions of creep and corrosion cracking of structural materials
за авторством: Zhigang Liu, та інші
Опубліковано: (2020)
за авторством: Zhigang Liu, та інші
Опубліковано: (2020)
Geoinformation tool for remote assessment of shelterbelts damaged by military actions
за авторством: Andreiev, Artem, та інші
Опубліковано: (2025)
за авторством: Andreiev, Artem, та інші
Опубліковано: (2025)
ОСОБЛИВОСТІ ЕЛЕКТРООСАДЖЕННЯ СПЛАВА КОБАЛЬТ–ВОЛЬФРАМ–РЕНІЙ
за авторством: Yapontseva, Yuliya, та інші
Опубліковано: (2019)
за авторством: Yapontseva, Yuliya, та інші
Опубліковано: (2019)
THE EVALUATION OF ENERGETIC POTENTIAL OF BIOMASS OF SEA BUCKTHORN (HYPPOPHAE RHAMNOIDES) PLANTS, GROWN ON TECHNOLOGICALLY DAMAGED OIL-POLLUTED SOILS
за авторством: Shevchyk-Kostiuk , L., та інші
Опубліковано: (2025)
за авторством: Shevchyk-Kostiuk , L., та інші
Опубліковано: (2025)
Experimental study of the thermal conductivity of composite materials collectors of solar energy
за авторством: Reztsov, V., та інші
Опубліковано: (2016)
за авторством: Reztsov, V., та інші
Опубліковано: (2016)
Multi-objective optimal power flow based gray wolf optimization method
за авторством: Mezhoud, N., та інші
Опубліковано: (2022)
за авторством: Mezhoud, N., та інші
Опубліковано: (2022)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
за авторством: Мацевитый, В. М., та інші
Опубліковано: (2014)
за авторством: Мацевитый, В. М., та інші
Опубліковано: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
за авторством: Мацевитый, В. М., та інші
Опубліковано: (2014)
за авторством: Мацевитый, В. М., та інші
Опубліковано: (2014)
A STUDY OF MATERIAL RECOGNITION ACCURACY BY RADIO WAVE METHODS
за авторством: Ovsyannikov, V. V., та інші
Опубліковано: (2023)
за авторством: Ovsyannikov, V. V., та інші
Опубліковано: (2023)
Computer-economical optimization method for solving inverse problems of determining electrophysical properties of objects in eddy current structroscopy
за авторством: Halchenko, V. Ya., та інші
Опубліковано: (2025)
за авторством: Halchenko, V. Ya., та інші
Опубліковано: (2025)
Determination of corrosion rate in places of insulation damage of underground pipelines
за авторством: R. M. Dzhala, та інші
Опубліковано: (2020)
за авторством: R. M. Dzhala, та інші
Опубліковано: (2020)
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
за авторством: Tolstolutskaya, G.D., та інші
Опубліковано: (2020)
за авторством: Tolstolutskaya, G.D., та інші
Опубліковано: (2020)
The main results' overview obtained by the method of amplitude-independent internal friction on metals and ionic crystals
за авторством: Petchenko, О.M., та інші
Опубліковано: (2019)
за авторством: Petchenko, О.M., та інші
Опубліковано: (2019)
The study of the influence of X-ray irradiation on dislocation characteristics in LiF crystals
за авторством: Petchenko, О.M., та інші
Опубліковано: (2021)
за авторством: Petchenko, О.M., та інші
Опубліковано: (2021)
Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
за авторством: Kalchenko, А.S., та інші
Опубліковано: (2019)
за авторством: Kalchenko, А.S., та інші
Опубліковано: (2019)
Схожі ресурси
-
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
за авторством: Fridman, Мark M.
Опубліковано: (2020) -
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
за авторством: Fridman, Мark M.
Опубліковано: (2019) -
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
за авторством: Fridman, Мark M.
Опубліковано: (2019) -
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
за авторством: Fridman, Mark M.
Опубліковано: (2018) -
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
за авторством: Fridman, Mark M.
Опубліковано: (2018)