Buchumschlag

Elastic-Plastic Problem for a Stringer Plate with a Circular Hole

When calculating the strength of machines, structures and buildings with technological holes, it is important to take into account the plastic zones that emerge around the holes. However, the unknown shape and size of the plastic zone complicate the solution of elastic-plastic problems. This paper g...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
1. Verfasser:	Мир-Салим-заде, М. В.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2021
Online Zugang:	https://journals.uran.ua/jme/article/view/231688
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Elastic-Plastic Problem for a Stringer Plate with a Circular Hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2021)

Elastic-Plastic Problem for a Stringer Plate with a Circular Hole
von: Mir-Salim-zade M. V.
Veröffentlicht: (2021)

Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)

Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)

Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: M. V. Mir-Salim-zade
Veröffentlicht: (2017)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: M. V. Mir-Salim-zade
Veröffentlicht: (2019)

Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, M.V.
Veröffentlicht: (2019)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)

Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: M. V. Mir-Salim-zade
Veröffentlicht: (2020)

Investigation fracture of an orthotropic plate with a circular hole and two edge cracks by the method of dynamic elasticity
von: M. P. Malezhyk, et al.
Veröffentlicht: (2019)

Inverse Problem of Fracture Mechanics for a Perforated Stringer Plate
von: Mir-Salim-zada, M. V.
Veröffentlicht: (2026)

Inverse Problem of Fracture Mechanics for a Perforated Stringer Plate
von: Mir-Salim-zada, M. V.
Veröffentlicht: (2026)

Deformation of an isotropic plate with a periodic system of curvilinear holes and plasticity bands
von: V. S. Kravets, et al.
Veröffentlicht: (2020)

Interaction of collinear surface cracks and circular hole in isotropic plate
von: K. M. Dovbnia, et al.
Veröffentlicht: (2013)

On Torsion of Transversely Isotropic Plate with Non-circular Cylindrical Hole
von: Ju. Khoma, et al.
Veröffentlicht: (2020)

Partial contact of faces of a variable width slit in a stringer plate
von: M. V. Mir-Salim-zade
Veröffentlicht: (2016)

Частичное закрытие прямолинейных трещин со связями в стрингерной пластине с отверстием
von: Мир-Салим-заде, М.В.
Veröffentlicht: (2017)

Stress State of the Pulled Up Adhesive Connection of the Plate with the Circular Hole and the Concentrically Placed Plate
von: S. S. Kuriennov, et al.
Veröffentlicht: (2022)

Limiting equilibrium of a plane with a circular hole
von: Lozhkin, V. N., et al.
Veröffentlicht: (1993)

Thermo-elastic interaction of a two-component circular inclusionand a crack in a plate
von: V. M. Zeleniak
Veröffentlicht: (2012)

Elastic interaction of a hole and four surface cracks of different length in an isotropic plate
von: K. M. Dovbnia, et al.
Veröffentlicht: (2014)

Strength of elasto-plastic plates with a square hole (inclusion) and a cut (thin inclusion) under uniaxial tension
von: I. S. Kuz, et al.
Veröffentlicht: (2018)

Buckling of elastic circular plates with an elastically restrained edges against rotation and internal elastic ring support
von: Bkhaskara Rao, et al.
Veröffentlicht: (2015)

Buckling of elastic circular plates with an elastically restrained edges against rotation and internal elastic ring support
von: Bhaskara Rao, L., et al.
Veröffentlicht: (2015)

Free vibrations of pentagonal plates with a hole
von: O. Y. Hryhorenko, et al.
Veröffentlicht: (2023)

The plane contact problem for an initially stressed elastic strip reinforced by an infinite inhomogeneous stringer
von: M. M. Dikhtiaruk
Veröffentlicht: (2019)

Contact Problem of Broken Stringer and Including Vertical End Crack Elastic Infinite Strip
von: V. N. Akopjan, et al.
Veröffentlicht: (2015)

Contact of Ends of Interphase Cut between Plate with Hole and Closed Elastic Rib
von: A. O. Siaskyi, et al.
Veröffentlicht: (2024)

Non-streching Relative to the Boundary Planes Transversely Isotropic Plate with a Circular Hole under Given on Its Splitting Force
von: I. Y. Khoma, et al.
Veröffentlicht: (2024)

Stress State of Transversely Isotropic Plate with Circular Hole on Surface of which the Concentrated Splitting Force Acts
von: I. Y. Khoma, et al.
Veröffentlicht: (2023)

Non-Axisymmetric Contact Problem for Circular Plate
von: S. V. Bosakov, et al.
Veröffentlicht: (2017)

Refined model of thermo-elastic-plastic bending of layered plates of regular structure. I. Problem statement
von: A. P. Jankovskij
Veröffentlicht: (2018)

Refined model of thermo-elastic-plastic bending of layered plates of regular structure. II. Modeling problems
von: A. P. Jankovskij
Veröffentlicht: (2018)

Tension and Shear of the Transversely Isotropic Piezoceramic Plate with Circular Hole under the Mixed Boundary Conditions on Plane Sides
von: Ju. Khoma, et al.
Veröffentlicht: (2017)

Computer simulation of the effect of an annular inclusion from a functionally graded material on the stress concentration around a circular hole in thin plates and cylindrical shells
von: E. L. Hart, et al.
Veröffentlicht: (2023)

The stress concentration in an elastoplastic spherical shell with a number of identical circular holes
von: I. S. Chernyshenko, et al.
Veröffentlicht: (2017)

Elastoplastic State of a Cylindrical Shell of Elliptic Cross-Section Weakened by a Circular Hole
von: E. A. Storozhuk, et al.
Veröffentlicht: (2017)