Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
Air flow measurement at the outlets of air terminal devices installed in ventilation systems is very difficult. At the outlets of anemostats, swirl diffusers, grilles, the air flow can swirl, contract, or expand sharply, change its direction, etc., which causes great measurement errors. Th...
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | Цаканян, О. С., Кошель, С. В. |
| Format: | Artikel |
| Sprache: | Englisch Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2021
|
| Online Zugang: | https://journals.uran.ua/jme/article/view/235450 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2021)
von: Цаканян, О. С., et al.
Veröffentlicht: (2021)
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2024)
von: Цаканян, О. С., et al.
Veröffentlicht: (2024)
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2024)
von: Цаканян, О. С., et al.
Veröffentlicht: (2024)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)
For constructing a spherical solar collector
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
For constructing a spherical solar collector
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Parabolic Boundary Value Problems in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Space with a Cavity
von: Конет, Іван Михайлович, et al.
Veröffentlicht: (2018)
von: Конет, Іван Михайлович, et al.
Veröffentlicht: (2018)
Parabolic Boundary Value Problems in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Layer with a Cavity
von: Громик, Андрій, et al.
Veröffentlicht: (2022)
von: Громик, Андрій, et al.
Veröffentlicht: (2022)
DETERMINATION OF THE EFFICIENCY OF SOLAR HOT WATER SYSTEMS IMPLEMENTATION
von: Matyakh, S., et al.
Veröffentlicht: (2020)
von: Matyakh, S., et al.
Veröffentlicht: (2020)
Parabolic Boundary Value Problems of Mathematical Physics in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Half-Space with a Cavity
von: Громик, Андрій, et al.
Veröffentlicht: (2023)
von: Громик, Андрій, et al.
Veröffentlicht: (2023)
Hyperbolic Boundary Value Problems of Mathematical Physics in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Half-Space With a Cavity
von: Громик, Андрій, et al.
Veröffentlicht: (2025)
von: Громик, Андрій, et al.
Veröffentlicht: (2025)
Features of designing high-voltage overhead power lines in an underground collector
von: Shevchenko, S. Yu., et al.
Veröffentlicht: (2025)
von: Shevchenko, S. Yu., et al.
Veröffentlicht: (2025)
Hyperbolic Boundary Value Problems of Mathematical Physics in a Piecewise Homogeneous Wedge-Shaped Cylindrical-Circular Half-Space
von: Громик, Андрій, et al.
Veröffentlicht: (2025)
von: Громик, Андрій, et al.
Veröffentlicht: (2025)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Semi-Сonductor Terahertz Systems of Coherent Reception on the Effect of “Hot-Electrons”
von: Eru, I. I.
Veröffentlicht: (2012)
von: Eru, I. I.
Veröffentlicht: (2012)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
CALCULATION OF COMPENSATING SUSCEPTANCE FOR A THREE-WIRE NET
von: Sirotin, Iu. A.
Veröffentlicht: (2014)
von: Sirotin, Iu. A.
Veröffentlicht: (2014)
Free-convective air movement in the vertical channel with discrete heat sources
von: Цаканян, О. С., et al.
Veröffentlicht: (2015)
von: Цаканян, О. С., et al.
Veröffentlicht: (2015)
Free-convective air movement in the vertical channel with discrete heat sources
von: Цаканян, О. С., et al.
Veröffentlicht: (2015)
von: Цаканян, О. С., et al.
Veröffentlicht: (2015)
Heat transfer of multichannel water convectors under natural convection
von: Цаканян, О. С., et al.
Veröffentlicht: (2013)
von: Цаканян, О. С., et al.
Veröffentlicht: (2013)
Heat transfer of multichannel water convectors under natural convection
von: Цаканян, О. С., et al.
Veröffentlicht: (2013)
von: Цаканян, О. С., et al.
Veröffentlicht: (2013)
COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
Analysis of the Stress State of a Layer with Two Cylindrical Swivel Joints and a Cylindrical Cavity
von: Мірошніков, В. Ю., et al.
Veröffentlicht: (2024)
von: Мірошніков, В. Ю., et al.
Veröffentlicht: (2024)
Analysis of the Stress State of a Layer with Two Cylindrical Swivel Joints and a Cylindrical Cavity
von: Мірошніков, В. Ю., et al.
Veröffentlicht: (2024)
von: Мірошніков, В. Ю., et al.
Veröffentlicht: (2024)
Integral Thermo-Anemometers for Average Temperature and Airflow Measurement in Ducts, at Anemostat Outlets and in Ventilation Grilles
von: Tsakanian, Oleh S., et al.
Veröffentlicht: (2021)
von: Tsakanian, Oleh S., et al.
Veröffentlicht: (2021)
Integral Thermo-Anemometers for Average Temperature and Airflow Measurement in Ducts, at Anemostat Outlets and in Ventilation Grilles
von: Tsakanian, Oleh S., et al.
Veröffentlicht: (2021)
von: Tsakanian, Oleh S., et al.
Veröffentlicht: (2021)
Metal Screen Influence on the Resonant Length of a Wire Antenna
von: Gorobets, N. N., et al.
Veröffentlicht: (2012)
von: Gorobets, N. N., et al.
Veröffentlicht: (2012)
Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)
Choosing the thermogas dynamic and design values of peak load turbine for high-temperature topping part of power unit K-300-24014
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2012)
DIPOLE ANTENNAS WITH A SECTOR-SHAPED RADIATION PATTERN
von: Gorobets, M. M., et al.
Veröffentlicht: (2024)
von: Gorobets, M. M., et al.
Veröffentlicht: (2024)
The use of functional-cost analysis in the tasks of alternatives choosing
von: Топунова, В. Ю., et al.
Veröffentlicht: (2023)
von: Топунова, В. Ю., et al.
Veröffentlicht: (2023)
The models of the “VOIDS” in the Universe
von: Korkina, M. P., et al.
Veröffentlicht: (2013)
von: Korkina, M. P., et al.
Veröffentlicht: (2013)
RESEARCH ON THE STABILITY AND SIMULATION OF THE ELECTRICAL AND THERMAL PARTS OF A HYBRID PHOTOVOLTAIC THERMAL COLLECTOR
von: Bondarenko , D., et al.
Veröffentlicht: (2025)
von: Bondarenko , D., et al.
Veröffentlicht: (2025)
To the orientation of spherical solar collectors
von: Ценципер, А. И., et al.
Veröffentlicht: (2015)
von: Ценципер, А. И., et al.
Veröffentlicht: (2015)
To the orientation of spherical solar collectors
von: Ценципер, А. И., et al.
Veröffentlicht: (2015)
von: Ценципер, А. И., et al.
Veröffentlicht: (2015)
A natural method of evaluating the permeability of the water-collector skeleter and optimization of the debit of fountain wells
von: Ludanov, K., et al.
Veröffentlicht: (2017)
von: Ludanov, K., et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Choosing a Universal Air Collector Design for a Cylindrical-Shaped Hot-Wire Anemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2021) -
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2024) -
Development of the Universal Air Collector Design for Measuring the Flow Rate of Swirling Air Flow Using an Integral Thermoanemometer
von: Цаканян, О. С., et al.
Veröffentlicht: (2024) -
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020) -
Use of In-house Design Modules When Choosing Bearing Assemblies for Pumps Being Designed
von: Rudenko, Andrii A., et al.
Veröffentlicht: (2020)