Buchumschlag

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure

This paper discusses the use of the random search method for the optimal design of single-layered rib-reinforced cylindrical shells under combined axial compression and internal pressure with account taken of the elastic-plastic material behavior. The optimality criterion is the minimum shell volume...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
1. Verfasser:	Filatov, Heorhii V.
Format:	Artikel
Sprache:	Englisch Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2021
Online Zugang:	https://journals.uran.ua/jme/article/view/235745
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: Filatov, Heorhii V.
Veröffentlicht: (2021)

Optimum Design of Reinforced Cylindrical Shells Under Combined Axial Compression and Internal Pressure
von: H. V. Filatov
Veröffentlicht: (2021)

Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: H. V. Filatov
Veröffentlicht: (2021)

Stability of Composite Cylindrical Shells with Geometrical and Structural Imperfections under Axial Compression
von: M. P. Semeniuk, et al.
Veröffentlicht: (2022)

Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)

Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)

Stability of Layered Cylindrical Anisotropic Shells under Action of Axial Compressive Loads in the Spatial Statement
von: N. P. Semenjuk, et al.
Veröffentlicht: (2019)

Effect of Mechanical and Geometric Parameters of Composite Cylindrical Shells with Localized Deflection on Character of Equilibrium Curves under Axial Compression
von: M. P. Semeniuk, et al.
Veröffentlicht: (2021)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)

Stability of Three-Layer Cylindrical Shell with Filler under External Pressure with Allowance for Pressure in The Internal Cylinder
von: N. P. Semenjuk, et al.
Veröffentlicht: (2020)

Allowable internal pressure in the hollow combined cylindrical castings
von: V. F. Mazorchuk, et al.
Veröffentlicht: (2017)

Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout under Axial Compression
von: Torabi, H., et al.
Veröffentlicht: (2014)

Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout under Axial Compression
von: H. Torabi, et al.
Veröffentlicht: (2014)

Optimum control of weld reinforcement formation
von: V. V. Dolinenko, et al.
Veröffentlicht: (2010)

Stability of Inhomogeneous Cylindrical Shells under Distributed External Pressure in the Spatial Statement
von: A. V. Podvornyj, et al.
Veröffentlicht: (2017)

Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)

Stress-strain State of Three-layer Cylindrical Shells with Reinforced Lightweight Filler under Nonstationary Loading
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2021)

Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)

Non-Stationary Vibrations of Cylindrical Shell Located in a Rigid Pipe and Interacting with Fluid Flows under Impulse Disturbances of Compression in an Internal Flow
von: N. P. Podchasov
Veröffentlicht: (2017)

Stability and Post-Buckling Behavior of Composite Cylindrical Shells with Local Imperfections under External Pressure
von: N. P. Semenjuk, et al.
Veröffentlicht: (2016)

On the influence of local deflections on the stability and the postbuckling behavior of composite cylindrical shells under external pressure
von: N. P. Semenjuk, et al.
Veröffentlicht: (2017)

Analytical evaluation of local effects in cylindrical shells testing and design
von: Guarracino, F.
Veröffentlicht: (2009)

The improved method of calculation of the ultimate strength of rocks under axial compression
von: D. L. Vasilev
Veröffentlicht: (2013)

Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011)

Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
von: V. M. Bystrov, et al.
Veröffentlicht: (2017)

Experimental Study of Stability of Longitudinally Compressed Cylindrical Shells upon Accumulation of Random Cuts-Cracks
von: A. P. Dzyuba, et al.
Veröffentlicht: (2024)

Deformation of three-layer cylindrical shells with transversally elastic core in a vicinity of the critical compression
von: M. P. Semeniuk, et al.
Veröffentlicht: (2019)

Dynamic Stability of Viscoelastic Flexible Plates of Variable Thickness under Axial Compression
von: R. A. Abdikarimov, et al.
Veröffentlicht: (2014)

Nonlinear analysis of concrete-filled steel square tube strengthened by internal transverse stiffened bars under axial compression
von: Nan Li, et al.
Veröffentlicht: (2017)

Modeling of a nonlinear deformation of orthotropic cylindrical shells with a hole with regard for the eccentricity of its reinforcement
von: I. S. Chernyshenko, et al.
Veröffentlicht: (2016)

Estimate of Strength of Layered Cylindrical Shells under Creep
von: A. Z. Galishin, et al.
Veröffentlicht: (2018)

Numerical Study of Stability of Layered Composite under Uni-Axial Compression of Filler Layers
von: V. A. Dekret, et al.
Veröffentlicht: (2014)

Study on Behavior of RPC Filled Steel Tubular Stub Columns under Axial Compression
von: Liu, S.H., et al.
Veröffentlicht: (2017)

On Applicability of Shell Models to Determination of Stress-Strain State and Damageability of Cylindrical Shells under Creep
von: A. Z. Galishin, et al.
Veröffentlicht: (2017)

Optimum surface relief restoration from photometric and altimetric data combined
von: Ju. V. Kornienko, et al.
Veröffentlicht: (2019)

Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: H. V. Filatov
Veröffentlicht: (2020)

Optimum reduction of operating pressure in pipeline in hardfacing repair of thinning areas
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)

Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT
von: Sun, F.Q., et al.
Veröffentlicht: (2016)

Modeling and design of an annular photoreactors with a UV-irradiation optimum parameters
von: A. O. Samsoni-Todorov, et al.
Veröffentlicht: (2013)