Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
The main objectives of the reconstruction are stated. Those are: increase of the service life of the hydro-turbines of Dnipro Cascade, enhancement of their efficiency, power, and environmental safety, extension of the power control range of the hydro-power plants, assurance of the reliability and im...
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | Субботин, В. Г., Бураков, А. С., Ефименко, В. Н., Старченко, А. Ю., Ковалёв, Ю. Н., Рассовский, В. Л. |
| Format: | Artikel |
| Sprache: | Englisch Ukrainisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2021
|
| Online Zugang: | https://journals.uran.ua/jme/article/view/240565 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)
Computational and experimental investigations of the dynamic characteristics of the blades of the model kaplan turbine
von: Рябов, А. В., et al.
Veröffentlicht: (2014)
von: Рябов, А. В., et al.
Veröffentlicht: (2014)
Computational and experimental investigations of the dynamic characteristics of the blades of the model kaplan turbine
von: Рябов, А. В., et al.
Veröffentlicht: (2014)
von: Рябов, А. В., et al.
Veröffentlicht: (2014)
Effect of 3D Shape of Pump-Turbine Runner Blade on Flow Characteristics in Turbine Mode
von: Русанов, А. В., et al.
Veröffentlicht: (2023)
von: Русанов, А. В., et al.
Veröffentlicht: (2023)
Effect of 3D Shape of Pump-Turbine Runner Blade on Flow Characteristics in Turbine Mode
von: Русанов, А. В., et al.
Veröffentlicht: (2023)
von: Русанов, А. В., et al.
Veröffentlicht: (2023)
Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant
von: Линник, А. В., et al.
Veröffentlicht: (2016)
von: Линник, А. В., et al.
Veröffentlicht: (2016)
Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant
von: Линник, А. В., et al.
Veröffentlicht: (2016)
von: Линник, А. В., et al.
Veröffentlicht: (2016)
CREATION METHODOLOGY OF STRATIGRAPHIC CHARTS OF SEDIMENTARY BASIN OF UKRAINIAN OIL AND GAS BEARING REGIONS
von: GOZHYK, P.F., et al.
Veröffentlicht: (2013)
von: GOZHYK, P.F., et al.
Veröffentlicht: (2013)
EFFECT OF GEOMETRICAL PARAMETERS OF PUMP-TURBINE RUNNERS ON ENERGY CHARACTERISTICS
von: Khoryev , O., et al.
Veröffentlicht: (2025)
von: Khoryev , O., et al.
Veröffentlicht: (2025)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)
Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
von: Линник, А. В., et al.
Veröffentlicht: (2014)
von: Линник, А. В., et al.
Veröffentlicht: (2014)
Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
von: Линник, А. В., et al.
Veröffentlicht: (2014)
von: Линник, А. В., et al.
Veröffentlicht: (2014)
PRODUCTION PUMPS IN THE COMPOSITION OF SMALL PUMPED HYDRO ENERGY STORAGE AS A REVERSIBLE HYDRO MACHINE
von: Verbovij, A.
Veröffentlicht: (2018)
von: Verbovij, A.
Veröffentlicht: (2018)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
Use of Computer Technology in Modernization of Head Covers for ПЛ 20-В-500 Kaplan Turbines
von: Strelnikova, E. A., et al.
Veröffentlicht: (2018)
von: Strelnikova, E. A., et al.
Veröffentlicht: (2018)
Use of Computer Technology in Modernization of Head Covers for ПЛ 20-В-500 Kaplan Turbines
von: Strelnikova, E. A., et al.
Veröffentlicht: (2018)
von: Strelnikova, E. A., et al.
Veröffentlicht: (2018)
Creation of Pyocin Composition Against Laboratory and Clinical Pseudomonas aeruginosa Strains
von: Balko, O.B., et al.
Veröffentlicht: (2025)
von: Balko, O.B., et al.
Veröffentlicht: (2025)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
von: Солодов, В. Г., et al.
Veröffentlicht: (2016)
von: Солодов, В. Г., et al.
Veröffentlicht: (2016)
Aerodynamical improvement of design, aerodynamic and power characteristics of “I.P.-L.P.-1” compartment of steam turbine К-325-23,5
von: Солодов, В. Г., et al.
Veröffentlicht: (2016)
von: Солодов, В. Г., et al.
Veröffentlicht: (2016)
Optimal design the system of serial plate heat exchangers
von: Хавин, Г. Л.
Veröffentlicht: (2016)
von: Хавин, Г. Л.
Veröffentlicht: (2016)
Optimal design the system of serial plate heat exchangers
von: Хавин, Г. Л.
Veröffentlicht: (2016)
von: Хавин, Г. Л.
Veröffentlicht: (2016)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)
Method for the Optimal Design of Vacuum-Evaporative Heat Pumps
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)
von: Kuznetsov, Mikhail A., et al.
Veröffentlicht: (2019)
IMMITATION MODEL OF A HYDRO TURBINE FOR COMPREHENSIVE MODELING OF HYDROELECTRIC POWER PLANT ELECTROMECHANICAL SYSTEM
von: Popovych, O., et al.
Veröffentlicht: (2023)
von: Popovych, O., et al.
Veröffentlicht: (2023)
ENERGY EFFICIENCY OF WIND-HYDRO PUMPING STATION SIGNIFICANT POWER
von: Vasko, P., et al.
Veröffentlicht: (2020)
von: Vasko, P., et al.
Veröffentlicht: (2020)
Modeling and research of a magnetoelectric converter for hydro and pneumo actuators
von: Rymsha, V. V., et al.
Veröffentlicht: (2023)
von: Rymsha, V. V., et al.
Veröffentlicht: (2023)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Effective Formalization of Design Processes as a Key Factor in Achieving Optimal Solutions When Creating the Final Stages of Steam Turbines
von: Тарелін, А. О., et al.
Veröffentlicht: (2026)
von: Тарелін, А. О., et al.
Veröffentlicht: (2026)
Effective Formalization of Design Processes as a Key Factor in Achieving Optimal Solutions When Creating the Final Stages of Steam Turbines
von: Тарелін, А. О., et al.
Veröffentlicht: (2026)
von: Тарелін, А. О., et al.
Veröffentlicht: (2026)
Estimation of durability and dynamic characteristics of driving wheel of turbine pump
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
Estimation of durability and dynamic characteristics of driving wheel of turbine pump
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Creation of Optimal Design of Runner Oil System of Kaplan Hydro-Turbines
von: Субботин, В. Г., et al.
Veröffentlicht: (2021) -
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
von: Субботин, В. Г., et al.
Veröffentlicht: (2021) -
Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
von: Субботин, В. Г., et al.
Veröffentlicht: (2021) -
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014) -
Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)