Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
A mathematical model of the dynamic instability of a three-layer conical shells with honeycomb structure made using additive technologies has been obtained. Dynamic instability is recognized as the interaction of the shell with a supersonic gas flow. The middle layer of the structure is a honeycomb...
Gespeichert in:
| Datum: | 2022 |
|---|---|
| Hauptverfasser: | Аврамов, К. В., Успенский, Б. В., Библик, И. В. |
| Format: | Artikel |
| Sprache: | Englisch Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2022
|
| Online Zugang: | https://journals.uran.ua/jme/article/view/255776 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)
von: Аврамов, К. В., et al.
Veröffentlicht: (2022)
Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)
Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)
Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)
Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)
Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
Experimental and Numerical Analysis of the Shear Properties of Honeycomb Cores Produced Using Additive Technologies
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
von: Деревянко, И. И., et al.
Veröffentlicht: (2022)
Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)
Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)
Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)
Dynamic instability of rockets deflectors in flight
von: Чернобрывко, М. В., et al.
Veröffentlicht: (2014)
von: Чернобрывко, М. В., et al.
Veröffentlicht: (2014)
Dynamic instability of rockets deflectors in flight
von: Чернобрывко, М. В., et al.
Veröffentlicht: (2014)
von: Чернобрывко, М. В., et al.
Veröffentlicht: (2014)
Bifurcations and Stability of Nonlinear Vibrations of a Three-Layer Composite Shell with Moderate Amplitudes
von: Аврамов, К. В., et al.
Veröffentlicht: (2025)
von: Аврамов, К. В., et al.
Veröffentlicht: (2025)
Bifurcations and Stability of Nonlinear Vibrations of a Three-Layer Composite Shell with Moderate Amplitudes
von: Аврамов, К. В., et al.
Veröffentlicht: (2025)
von: Аврамов, К. В., et al.
Veröffentlicht: (2025)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
Static Buckling of a Pre-loaded Complex Nano-composite Shell
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
Static Buckling of a Pre-loaded Complex Nano-composite Shell
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
Optimal Design of Single-Layered Reinforced Cylindrical Shells
von: Филатов, Г. В.
Veröffentlicht: (2021)
von: Филатов, Г. В.
Veröffentlicht: (2021)
Interaction of shallow shell with subcritical potential stream
von: Аврамов, К. В.
Veröffentlicht: (2015)
von: Аврамов, К. В.
Veröffentlicht: (2015)
Interaction of shallow shell with subcritical potential stream
von: Аврамов, К. В.
Veröffentlicht: (2015)
von: Аврамов, К. В.
Veröffentlicht: (2015)
Mathematical modeling of wave fields in layered media with additional stresses
von: Malitsky, D. V., et al.
Veröffentlicht: (2012)
von: Malitsky, D. V., et al.
Veröffentlicht: (2012)
Modified additive-averaged splitting for solving three-dimensional equations of hydrodynamics
von: Katsalova, L. N.
Veröffentlicht: (2016)
von: Katsalova, L. N.
Veröffentlicht: (2016)
Development of Beam Instability in Periodically Inhomogeneous Plasma
von: Bliokh, K. Yu.
Veröffentlicht: (2013)
von: Bliokh, K. Yu.
Veröffentlicht: (2013)
Assembly methods of solving inverse problems as an integral element of additive technologies for interpretations of gravity anomalies
von: Balk, P. I., et al.
Veröffentlicht: (2019)
von: Balk, P. I., et al.
Veröffentlicht: (2019)
AXIALLY-SYMMETRIC RADIATION FIELD OF CONICAL MONOPOLE
von: Kuryliak, D. B., et al.
Veröffentlicht: (2013)
von: Kuryliak, D. B., et al.
Veröffentlicht: (2013)
Modelling of Electron States in Conical Quantum Dots
von: Сосницька, Наталя Леонідівна, et al.
Veröffentlicht: (2019)
von: Сосницька, Наталя Леонідівна, et al.
Veröffentlicht: (2019)
The study of convergence of additive-averaged splitting based on the scheme of explicit solution for three-dimensional equations of convective diffusion
von: Katsalova, L.
Veröffentlicht: (2015)
von: Katsalova, L.
Veröffentlicht: (2015)
Periodic, almost periodic and chaotic forced oscillations of the sloping cantilever shell under geometrically nonlinear deformation
von: Малышев, С. Е., et al.
Veröffentlicht: (2017)
von: Малышев, С. Е., et al.
Veröffentlicht: (2017)
Periodic, almost periodic and chaotic forced oscillations of the sloping cantilever shell under geometrically nonlinear deformation
von: Малышев, С. Е., et al.
Veröffentlicht: (2017)
von: Малышев, С. Е., et al.
Veröffentlicht: (2017)
THE INFLUENCE OF INSTABILITY CONSUMPTION ON THE HYBRID ENERGY SYSTEM BALANCE
von: Kuznietsov, M., et al.
Veröffentlicht: (2020)
von: Kuznietsov, M., et al.
Veröffentlicht: (2020)
About Influence of Plasma Inhomogeneity on Plasma-Beam Instability
von: Bliokh, K. Yu.
Veröffentlicht: (2013)
von: Bliokh, K. Yu.
Veröffentlicht: (2013)
Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)
Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)
Calculation of the Tubular Elements Made of Pressed Profiles
von: Гребенніков, М. М., et al.
Veröffentlicht: (2023)
von: Гребенніков, М. М., et al.
Veröffentlicht: (2023)
Calculation of the Tubular Elements Made of Pressed Profiles
von: Гребенніков, М. М., et al.
Veröffentlicht: (2023)
von: Гребенніков, М. М., et al.
Veröffentlicht: (2023)
Ähnliche Einträge
-
Dynamic Instability of a Three-Layer Conical Shell with Honeycomb Structure Made by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2022) -
Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022) -
Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022) -
Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: Успенский, Б. В., et al.
Veröffentlicht: (2022) -
Vibrations of a Cylindrical Sandwich Shell with a Honeycomb Core Made Using FDM technology
von: Успенский, Б. В., et al.
Veröffentlicht: (2022)