Buchumschlag

Mathematical and Computer Modeling of Convective Heat Transfer in Fuel Cartridges of Fuel Elements with Different Shapes and Packing of Rods

The paper consists of three sections and is of an informational and generalizing nature, indicating promising areas for further research. The first section "R-functions method in mathematical modeling of convective heat transfer in fuel cartridges with fuel elements" is devoted to the use...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2022
Hauptverfasser:	Максименко-Шейко, К. В., Шейко, Т. И., Лисин, Д. А., Т. Б. Дудинов, Т. Б.
Format:	Artikel
Sprache:	Russisch Englisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2022
Online Zugang:	https://journals.uran.ua/jme/article/view/255783
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Mathematical and Computer Modeling of Convective Heat Transfer in Fuel Cartridges of Fuel Elements with Different Shapes and Packing of Rods
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2022)

Mathematical and Computer Modeling of Convective Heat Transfer in Fuel Cartridges of Fuel Elements with Different Shapes and Packing of Rods
von: K. V. Maksymenko-Sheiko, et al.
Veröffentlicht: (2022)

The R-functions method in mathematical modeling of convective heat transfer in fuel cartridge with fuel rods
von: Maksimenko-Sheyko, K.V., et al.
Veröffentlicht: (2013)

The R-functions method in mathematical modelling of convective heat transfer in the octahedral fuel cartridge with 37 fuel rods
von: R. A. Koljada, et al.
Veröffentlicht: (2016)

The thermal-hydraulic calculation in a fuel cartridge when the symmetry of fuel rods packing is broken
von: Sheyko, T.I., et al.
Veröffentlicht: (2019)

Mathematical and Computer Modeling of the Forms of Multi-Zone Fuel Elements with Plates
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2023)

Mathematical and Computer Modeling of the Forms of Multi-Zone Fuel Elements with Plates
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2023)

Mathematical and Computer Simulation of Hex Head Screws for Implementation on a 3D Printer
von: Шейко, Т. И., et al.
Veröffentlicht: (2021)

Mathematical and Computer Simulation of Hex Head Screws for Implementation on a 3D Printer
von: Шейко, Т. И., et al.
Veröffentlicht: (2021)

The mathematical and computer modelling of the building constructions on the R-functions basis
von: Литвинова, Ю. С., et al.
Veröffentlicht: (2014)

The mathematical and computer modelling of the building constructions on the R-functions basis
von: Литвинова, Ю. С., et al.
Veröffentlicht: (2014)

Mathematical modeling of the automobile bodies with the help of R-functions
von: Лисин, Д. А., et al.
Veröffentlicht: (2013)

Mathematical modeling of the automobile bodies with the help of R-functions
von: Лисин, Д. А., et al.
Veröffentlicht: (2013)

Mathematical and Computer Modeling of the Forms of Multi-Zone Fuel Elements with Plates
von: K. V. Maksymenko-Sheiko, et al.
Veröffentlicht: (2022)

Facility for hydrogenation and thermal testing of internally pressurized dummy fuel rods
von: Dolgiy, V.A., et al.
Veröffentlicht: (2020)

Stress-strain state and wear modelling for fuel rod – grid contact
von: Breslavsky, D., et al.
Veröffentlicht: (2023)

Analytical identification of three-dimensional geometric objects by information about the shape of their cross-sections
von: Литвинова, Ю. С., et al.
Veröffentlicht: (2017)

Analytical identification of three-dimensional geometric objects by information about the shape of their cross-sections
von: Литвинова, Ю. С., et al.
Veröffentlicht: (2017)

Identification of the fuel rod cladding destruction from the change of the SNF storage casks radiation
von: Rudychev, V.G., et al.
Veröffentlicht: (2020)

Mathematical modelling of motion of particles of burning fuel
von: S. V. Olshanskij, et al.
Veröffentlicht: (2012)

Mathematical modelling of motion of particles of burning fuel
von: Ольшанский, С. В., et al.
Veröffentlicht: (2012)

Mathematical modelling of motion of particles of burning fuel
von: Ольшанский, С. В., et al.
Veröffentlicht: (2012)

Effect of Hydrogen, Hydride Orientation and Temperature on Low-Cycle Fatigue Resistance of Zr-1%Nb Fuel Rod Claddings
von: G. Riedkina, et al.
Veröffentlicht: (2021)

Математическое моделирование поверхностей автомобилей с помощью R-функций
von: Лисин, Д.А., et al.
Veröffentlicht: (2013)

Computer modeling of the erosion of the convection heat transfer surfaces of boiler tpp 312
von: S. H. Kobzar, et al.
Veröffentlicht: (2017)

Assessment of impacting the thin protective coatings on the stress–strain state of the cladding of fuel rods of nuclear reactors
von: Povolotskii, E.V., et al.
Veröffentlicht: (2020)

Assessment of the corrosion resistance of the main alternative materials for light water reactors tolerant fuel rod cladding
von: Zuyok, V., et al.
Veröffentlicht: (2022)

Influencing of thin protective coatings on natural frequencies of radial oscillations of claddings of fuel rods of nuclear reactors
von: Mazurenko, Yu.E., et al.
Veröffentlicht: (2020)

Heat transfer of supercritical pressure water in fuel assemblies in unsteady regime
von: A. A. Avramenko, et al.
Veröffentlicht: (2016)

Computer design of thermoelectric starting pre-heater on gas fuel
von: M. V. Maksimuk
Veröffentlicht: (2016)

Ways of disposal of objective fuel sediments for fuel
von: Sniezhkin, Yurii, et al.
Veröffentlicht: (2021)

Ways of disposal of objective fuel sediments for fuel
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2021)

Economic-mathematical model of fuel supply for thermal power sector taking into account the substitution of regular fuel and limits for emissions
von: M. I. Kaplin, et al.
Veröffentlicht: (2015)

Economic-mathematical model of fuel supply for thermal power sector taking into account the substitution of regular fuel and limits for emissions
von: Kaplin M.I., et al.
Veröffentlicht: (2015)

Problems of calculation of heat transfer crisis in fuel assembles of water cooled reactors
von: G. I. Sharaevskij, et al.
Veröffentlicht: (2018)

Preliminary analysis of the possibility of transfer of fuel containing materials into a controlled condition
von: D. A. Stelmakh, et al.
Veröffentlicht: (2019)

Mathematical modeling of heat exchanger with liquid flow for tube with polyzone finning
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2018)

Mathematical modeling of heat exchanger with liquid flow for tube with polyzone finning
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2018)

Packing non-equal spheres into containers of different shapes
von: Ju. G. Stojan, et al.
Veröffentlicht: (2016)

Research of fuel economy prospects for metal heat processing operations realization due to convective heat exchange intensification
von: A. B. Birjukov
Veröffentlicht: (2013)