Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
The model of cracking in the brake mechanism drum under action of temperature stresses at braking the automobile is work out. Thermal fracture is caused by heat generation in the drum during the friction. The model is based on the analysis of the fracturing zone. During operation of the wheel car fr...
Saved in:
| Date: | 2014 |
|---|---|
| Main Author: | Зульфугаров, Э. И. |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2014
|
| Subjects: | |
| Online Access: | https://journals.uran.ua/jme/article/view/27195 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingSimilar Items
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
by: Зульфугаров, Э. И.
Published: (2014)
by: Зульфугаров, Э. И.
Published: (2014)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
by: Askerov, Sahib A.
Published: (2025)
by: Askerov, Sahib A.
Published: (2025)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
by: Askerov, Sahib A.
Published: (2025)
by: Askerov, Sahib A.
Published: (2025)
THE METHODIC OF CALCULATING THE CURRENT DENSITY DISTRIBUTION IN THE DISK-SHAPED ROTOR OF ELECTRODYNAMIC BRAKE
by: Tsygankova, G.
Published: (2018)
by: Tsygankova, G.
Published: (2018)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)
by: Velizade, Evren S.
Published: (2020)
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)
by: Velizade, Evren S.
Published: (2020)
Fracture of non-uniformly heated annular disk
by: Калантарлы, Н. М.
Published: (2014)
by: Калантарлы, Н. М.
Published: (2014)
Fracture of non-uniformly heated annular disk
by: Калантарлы, Н. М.
Published: (2014)
by: Калантарлы, Н. М.
Published: (2014)
Modeling Crack Initiation in a Composite Under Bending
by: Hasanov, Sh. G.
Published: (2018)
by: Hasanov, Sh. G.
Published: (2018)
Modeling Crack Initiation in a Composite Under Bending
by: Hasanov, Sh. G.
Published: (2018)
by: Hasanov, Sh. G.
Published: (2018)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
by: Гасанов, Ф. Ф.
Published: (2013)
by: Гасанов, Ф. Ф.
Published: (2013)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
by: Гасанов, Ф. Ф.
Published: (2013)
by: Гасанов, Ф. Ф.
Published: (2013)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
by: Mir-Salim-zade, Minavar V.
Published: (2020)
by: Mir-Salim-zade, Minavar V.
Published: (2020)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
by: Mir-Salim-zade, Minavar V.
Published: (2020)
by: Mir-Salim-zade, Minavar V.
Published: (2020)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
by: Mir-Salim-zade, Minavar V.
Published: (2019)
by: Mir-Salim-zade, Minavar V.
Published: (2019)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
by: Mir-Salim-zade, Minavar V.
Published: (2019)
by: Mir-Salim-zade, Minavar V.
Published: (2019)
Minimization of fracture parameters for friction pair hub
by: Мирсалимов, В. М., et al.
Published: (2015)
by: Мирсалимов, В. М., et al.
Published: (2015)
Minimization of fracture parameters for friction pair hub
by: Мирсалимов, В. М., et al.
Published: (2015)
by: Мирсалимов, В. М., et al.
Published: (2015)
APPLICATION OF MAGNETORHEOLOGICAL ELASTOMERS FOR PERFORMANCE CONTROL OF CUSHIONING SYSTEMS FOR WHEELED VEHICLES
by: Dushchenko, V. V., et al.
Published: (2019)
by: Dushchenko, V. V., et al.
Published: (2019)
Equistrong hole shape for crack growth deceleration under longitudinal shear
by: Калантарлы, Н. М.
Published: (2018)
by: Калантарлы, Н. М.
Published: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
by: Калантарлы, Н. М.
Published: (2018)
by: Калантарлы, Н. М.
Published: (2018)
DETERMINATION OF THE ELECTRIC DRIVE POWER FOR LIGHTLY ARMORED CATERPILLAR AND WHEELED VEHICLES USING SINGLE- OR TWO-STAGE MECHANICAL GEARBOXES
by: Volontsevich, D. O., et al.
Published: (2019)
by: Volontsevich, D. O., et al.
Published: (2019)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
by: Мустафаев, Азер Байрам оглы
Published: (2015)
by: Мустафаев, Азер Байрам оглы
Published: (2015)
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
by: Мустафаев, Азер Байрам оглы
Published: (2015)
by: Мустафаев, Азер Байрам оглы
Published: (2015)
ENERGY EFFICIENCY OF THE SUBWAY ELECTRICAL SUPPLY SYSTEM WITH ELECTRICAL ENERGY RECOVERY AT BRAKING
by: Zhemerov, George G., et al.
Published: (2019)
by: Zhemerov, George G., et al.
Published: (2019)
Computational model of cracking in circular heated disk
by: Калантарлы, Наиля Мерадж гызы
Published: (2015)
by: Калантарлы, Наиля Мерадж гызы
Published: (2015)
Computational model of cracking in circular heated disk
by: Калантарлы, Наиля Мерадж гызы
Published: (2015)
by: Калантарлы, Наиля Мерадж гызы
Published: (2015)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
by: Mir-Salim-zade, Minavar V.
Published: (2018)
by: Mir-Salim-zade, Minavar V.
Published: (2018)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
by: Mir-Salim-zade, Minavar V.
Published: (2018)
by: Mir-Salim-zade, Minavar V.
Published: (2018)
COMPARATIVE ANALYSIS OF TWO HIGH-SPEED SINGLE-PHASE ELECTRICAL MACHINES WITH PERMANENT MAGNETS ON THE STATOR
by: Prakht, V. A., et al.
Published: (2020)
by: Prakht, V. A., et al.
Published: (2020)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
by: Гасанов, Шахин
Published: (2015)
by: Гасанов, Шахин
Published: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
by: Гасанов, Шахин
Published: (2015)
by: Гасанов, Шахин
Published: (2015)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
by: Мир-Салим-заде, М. В.
Published: (2017)
by: Мир-Салим-заде, М. В.
Published: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
by: Мир-Салим-заде, М. В.
Published: (2017)
by: Мир-Салим-заде, М. В.
Published: (2017)
Crack nucleation in an isotropic medium under non-uniform stress field
by: Оруджева, Р. У.
Published: (2015)
by: Оруджева, Р. У.
Published: (2015)
Crack nucleation in an isotropic medium under non-uniform stress field
by: Оруджева, Р. У.
Published: (2015)
by: Оруджева, Р. У.
Published: (2015)
On a Possibility of Creating Low-Voltage Generators of Magnetic-Braking Radiation on Free Electron Beams
by: Yefimov, B. P.
Published: (2013)
by: Yefimov, B. P.
Published: (2013)
IMPLEMENTING OF MICROSOFT AZURE MACHINE LEARNING TECHNOLOGY FOR ELECTRIC MACHINES OPTIMIZATION
by: Pliugin, V. E., et al.
Published: (2019)
by: Pliugin, V. E., et al.
Published: (2019)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
by: Мирсалимов, В. М., et al.
Published: (2014)
by: Мирсалимов, В. М., et al.
Published: (2014)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
by: Мирсалимов, В. М., et al.
Published: (2014)
by: Мирсалимов, В. М., et al.
Published: (2014)
Similar Items
-
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
by: Зульфугаров, Э. И.
Published: (2014) -
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
by: Askerov, Sahib A.
Published: (2025) -
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
by: Askerov, Sahib A.
Published: (2025) -
THE METHODIC OF CALCULATING THE CURRENT DENSITY DISTRIBUTION IN THE DISK-SHAPED ROTOR OF ELECTRODYNAMIC BRAKE
by: Tsygankova, G.
Published: (2018) -
Rational Design of Vehicle Braking Systems with Reduced Wear of Friction Lining
by: Velizade, Evren S.
Published: (2020)