Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content
The paper examines core type transformers in which windings clamping and magnetic system end yokes clamping is accomplished by means of the same yoke beams. With regard to forces of friction between the yoke beams and the yoke there were obtained expressions for internal forces in the active part el...
Saved in:
| Date: | 2014 |
|---|---|
| Main Author: | Лазарев, И. В. |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2014
|
| Subjects: | |
| Online Access: | https://journals.uran.ua/jme/article/view/31403 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingSimilar Items
Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content
by: Лазарев, И. В.
Published: (2014)
by: Лазарев, И. В.
Published: (2014)
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В., et al.
Published: (2015)
by: Лазарев, И. В., et al.
Published: (2015)
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В., et al.
Published: (2015)
by: Лазарев, И. В., et al.
Published: (2015)
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В.
Published: (2015)
by: Лазарев, И. В.
Published: (2015)
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В.
Published: (2015)
by: Лазарев, И. В.
Published: (2015)
Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content
by: I. V. Lazarev
Published: (2014)
by: I. V. Lazarev
Published: (2014)
DYNAMICS MODEL OF MOISTURE IN PAPER INSULATION-TRANSFORMER OIL SYSTEM IN NON-STATIONARY THERMAL MODES OF THE POWER TRANSFORMER
by: Vasilevskij, V. V.
Published: (2016)
by: Vasilevskij, V. V.
Published: (2016)
The influence of partial deforestation on moisture regime: sums of precipitation and total soil moisture content for the territory of Ukraine based on data of numerical experiment LUMIP
by: Pysarenko, L.A., et al.
Published: (2022)
by: Pysarenko, L.A., et al.
Published: (2022)
Decrease in the damage of powerful turbogenerator stator caused by vibration in the end zones (analysis, hypotheses, experiment)
by: Shumilov, Yu. A., et al.
Published: (2014)
by: Shumilov, Yu. A., et al.
Published: (2014)
THE THEORETICAL JUSTIFICATION FOR THE NEAT-MOISTURE EXCHANGE PARAMETERS IN SOILS AND ATMOSPHERIC AIR UNDER THE CONDITIONS OF CAVE COMPLEX OF KIEV-PECHERSK LAVRA
by: Sitnikov, А.B.
Published: (2014)
by: Sitnikov, А.B.
Published: (2014)
The method of accelerated testing of solar drying moisture contain mediums processes
by: Kuchinsky, V., et al.
Published: (2017)
by: Kuchinsky, V., et al.
Published: (2017)
A HIGH SENSITIVE MICROWAVE MEASURING DEVICE OF THE MOISTURE CONTENT IN THE NON-POLAR DIELECTRIC LIQUIDS BASED ON AN INHOMOGENEOUS STEP COAXIAL RESONATOR
by: Rudakov, V. V., et al.
Published: (2016)
by: Rudakov, V. V., et al.
Published: (2016)
THE SCIENTIFIC FOUNDATIONS OF MOISTURE AND HEAT EXCHANGE UNDER THE CONDITIONS OF CAVE COMPLEX OF KYIV PECHERSK LAVRA
by: Sitnikov, A.B.
Published: (2014)
by: Sitnikov, A.B.
Published: (2014)
Investigation the influence of soil’s moisture regime on their degradation using the remote sensing and ground field verification
by: Romanciuc, Inna
Published: (2018)
by: Romanciuc, Inna
Published: (2018)
Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
by: Луговая, С. О., et al.
Published: (2015)
by: Луговая, С. О., et al.
Published: (2015)
Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
by: Луговая, С. О., et al.
Published: (2015)
by: Луговая, С. О., et al.
Published: (2015)
Moisture as an indicator of the manifestation of hazardous properties of coal seams
by: Rudniev, Ye.S., et al.
Published: (2022)
by: Rudniev, Ye.S., et al.
Published: (2022)
THE METHODICAL ASPECTS OF VALIDITY ASSESGMENT FOR HEAT-MOISTURE EXCHANGE STUDIES (AS AN EXAMPLE THE COMPLEX OF KYIV PECHERSK LAVRA)
by: Sitnikov, A.B.
Published: (2015)
by: Sitnikov, A.B.
Published: (2015)
Method for assessing unevenness of cellulose insulation layers aging of power transformers winding
by: Poliakov, M. O., et al.
Published: (2022)
by: Poliakov, M. O., et al.
Published: (2022)
DETERMINATION OF INSULATION PARAMETERS OF CURRENT TRANSFORMERS AT MULTIPLE MEASUREMENTS IN MONITORING SYSTEMS UNDER WORKING VOLTAGE
by: Beliaev, V. K., et al.
Published: (2016)
by: Beliaev, V. K., et al.
Published: (2016)
MULTIFREQUENCY ALGORITHMS FOR DETERMINING THE MOISTURE CONTENT OF LIQUID EMULSIONS BY THE METHOD OF RESONANCE DIELCOMETRY
by: Korobko, A. A.
Published: (2017)
by: Korobko, A. A.
Published: (2017)
THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
by: Gurin, A. G., et al.
Published: (2019)
by: Gurin, A. G., et al.
Published: (2019)
THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
by: Zagirnyak, M. V., et al.
Published: (2014)
by: Zagirnyak, M. V., et al.
Published: (2014)
Оne mean for optimal plate heat exchanger calculation
by: Арсеньева, О. П., et al.
Published: (2016)
by: Арсеньева, О. П., et al.
Published: (2016)
Оne mean for optimal plate heat exchanger calculation
by: Арсеньева, О. П., et al.
Published: (2016)
by: Арсеньева, О. П., et al.
Published: (2016)
Optimal design the system of serial plate heat exchangers
by: Хавин, Г. Л.
Published: (2016)
by: Хавин, Г. Л.
Published: (2016)
Optimal design the system of serial plate heat exchangers
by: Хавин, Г. Л.
Published: (2016)
by: Хавин, Г. Л.
Published: (2016)
Calculation of plate heat exchanger with different channel types in one device
by: Хавин, Г. Л.
Published: (2016)
by: Хавин, Г. Л.
Published: (2016)
Calculation of plate heat exchanger with different channel types in one device
by: Хавин, Г. Л.
Published: (2016)
by: Хавин, Г. Л.
Published: (2016)
Research and analysis of international and national approaches in building information security system in GRID
by: Borovska, O.M., et al.
Published: (2018)
by: Borovska, O.M., et al.
Published: (2018)
ASSESSMENT OF THE RESOURCE CONSUMPTION OF OIL-FILLED POWER TRANSFORMER PAPER INSULATION BASED ON UPDATED AGING INTEGRAL
by: Vasilevskij, V. V.
Published: (2015)
by: Vasilevskij, V. V.
Published: (2015)
Analytical method of profiling axial-radial compressor impellers
by: Rusanov, A. V., et al.
Published: (2019)
by: Rusanov, A. V., et al.
Published: (2019)
Analytical method of profiling axial-radial compressor impellers
by: Rusanov, A. V., et al.
Published: (2019)
by: Rusanov, A. V., et al.
Published: (2019)
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
by: Бойко, А. В., et al.
Published: (2015)
by: Бойко, А. В., et al.
Published: (2015)
Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
by: Бойко, А. В., et al.
Published: (2015)
by: Бойко, А. В., et al.
Published: (2015)
COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
by: Stavinskii, A. A., et al.
Published: (2015)
by: Stavinskii, A. A., et al.
Published: (2015)
DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
by: Kovalenko , M., et al.
Published: (2024)
by: Kovalenko , M., et al.
Published: (2024)
Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
by: Larbi, B., et al.
Published: (2023)
by: Larbi, B., et al.
Published: (2023)
FRACTIONAL WINDINGS HARMONIC ANALYSIS
by: Degtev, V. G.
Published: (2013)
by: Degtev, V. G.
Published: (2013)
Similar Items
-
Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content
by: Лазарев, И. В.
Published: (2014) -
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В., et al.
Published: (2015) -
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В., et al.
Published: (2015) -
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В.
Published: (2015) -
Axial internal forces in power transformer active part elements after short circuit
by: Лазарев, И. В.
Published: (2015)