Enhancement of Aeroengine Combustion Chamber Air Cooling Holes Design for Emission Reduction and Pattern Factor Control
The results of a comprehensive numerical analysis of temperature uniformity and NOx and CO emission predictions in an aeroengine annular combustor liner, conducted by geometrical modifications through design changes in primary cooling air, including effusion cooling holes, are shown in the paper. A...
Saved in:
| Date: | 2025 |
|---|---|
| Main Author: | Hajivand, Masoud |
| Format: | Article |
| Language: | English |
| Published: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2025
|
| Online Access: | https://journals.uran.ua/jme/article/view/321233 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingSimilar Items
Enhancement of Aeroengine Combustion Chamber Air Cooling Holes Design for Emission Reduction and Pattern Factor Control
by: Hajivand, Masoud
Published: (2025)
by: Hajivand, Masoud
Published: (2025)
Reduction of natural gas consumption and reduction of emissions with combustion products in municipal heat supply
by: O. I. Sihal, et al.
Published: (2019)
by: O. I. Sihal, et al.
Published: (2019)
Experience of the Development of Burners, Chambers and Technologies for Reducing Emissions of Nitrogen Oxides by Boilers During the Combustion of Natural Gas
by: Ja. Sigal, et al.
Published: (2019)
by: Ja. Sigal, et al.
Published: (2019)
Reduction of Nitrogen Oxides Effluents within an Open Flame by Input the Water Vapour into Combustion Air Flow
by: B. S. Soroka, et al.
Published: (2018)
by: B. S. Soroka, et al.
Published: (2018)
About a co-combustion technology for brown coal and straw in combustion chambers with a ?xed bed
by: A. S. Matvejchuk
Published: (2012)
by: A. S. Matvejchuk
Published: (2012)
Optimization of mathematical models of aerodynamic surfaces for aeroengines on the base of B-splines
by: O. M. Lytvyn, et al.
Published: (2010)
by: O. M. Lytvyn, et al.
Published: (2010)
The Features of Tubular Type Burner System for Combustion Chamber Gas Transporting Unit
by: G. B. Varlamov, et al.
Published: (2012)
by: G. B. Varlamov, et al.
Published: (2012)
The automation design of central monitoring refrigerating chamber
by: Dzh. F. Mamedov, et al.
Published: (2002)
by: Dzh. F. Mamedov, et al.
Published: (2002)
Mathematical Description and Numerical Study of Workflow in Combustion Chamber of Boiler with Circulating Fuidized Bed
by: B. B. Rokhman, et al.
Published: (2012)
by: B. B. Rokhman, et al.
Published: (2012)
Combustion of ethanol+air mixture supported by transverse arc plasma
by: Yukhymenko, V.V., et al.
Published: (2007)
by: Yukhymenko, V.V., et al.
Published: (2007)
Study of ignition and combustion of two-fraction coal-air suspension
by: S. G. Orlovskaya, et al.
Published: (2018)
by: S. G. Orlovskaya, et al.
Published: (2018)
Study of ignition and combustion of two-fraction coal-air suspension
by: S. G. Orlovskaya, et al.
Published: (2018)
by: S. G. Orlovskaya, et al.
Published: (2018)
Analysis of conditions for burning of volatiles and air mixtures at biomass combustion
by: M. M. Zhovmir
Published: (2014)
by: M. M. Zhovmir
Published: (2014)
Investigation of Co-firing for Fuel Derived from Municipal Solid Waste in a Model Combustion Chamber
by: S. H. Kobzar, et al.
Published: (2020)
by: S. H. Kobzar, et al.
Published: (2020)
Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
by: Dubrovskyi V.V., et al.
Published: (2006)
by: Dubrovskyi V.V., et al.
Published: (2006)
Film cooling by means of one-row inclined holes arranged in dimples
by: A. A. Khalatov, et al.
Published: (2015)
by: A. A. Khalatov, et al.
Published: (2015)
JUSTIFICATION OF RECOVERY CHAMBER HEIGHT AND AIR SUPPLY INFLUENCE ON WOOD GAS OUTPUT AND QUALITY
by: Yarosh, Y., et al.
Published: (2018)
by: Yarosh, Y., et al.
Published: (2018)
Justification of recovery chamber height and air supply influence on wood gas output and quality
by: Ya. D. Yarosh, et al.
Published: (2018)
by: Ya. D. Yarosh, et al.
Published: (2018)
Thermodynamics of toxic automotive emissions in city air and air purification by plants
by: Ya. Believtsev, et al.
Published: (2018)
by: Ya. Believtsev, et al.
Published: (2018)
PECULIARITIES OF APPLICATION OF THE NORMATIVE DOCUMENTS ON LIMITATION OF POLLUTANT EMISSIONS AT BIOMASS COMBUSTION
by: Zhovmir, M., et al.
Published: (2019)
by: Zhovmir, M., et al.
Published: (2019)
Peculiarities of application of the normative documents on limitation of pollutant emissions at biomass combustion
by: M. M. Zhovmir, et al.
Published: (2019)
by: M. M. Zhovmir, et al.
Published: (2019)
The influence of oxygen enrichment of combustion air on the resistance of the lining of hot-blast stoves
by: L. P. Hres, et al.
Published: (2022)
by: L. P. Hres, et al.
Published: (2022)
Study of Heat-Recovery Systems for Heating and Moisturing Combustion Air of Boiler Units
by: N. M. Fialko, et al.
Published: (2020)
by: N. M. Fialko, et al.
Published: (2020)
Study of Heat-Recovery Systems for Heating and Moisturing Combustion Air of Boiler Units
by: Fialko, N.M., et al.
Published: (2020)
by: Fialko, N.M., et al.
Published: (2020)
Power efficiency of the "wet" combustion and pollutants formation reduction
by: B. S. Soroka, et al.
Published: (2019)
by: B. S. Soroka, et al.
Published: (2019)
Computer simulation of two perspective single-row hole systems of film cooling
by: A. A. Khalatov, et al.
Published: (2017)
by: A. A. Khalatov, et al.
Published: (2017)
Optimization of the width of air cooling duct of spent fuel cask
by: S. V. Aljokhina, et al.
Published: (2011)
by: S. V. Aljokhina, et al.
Published: (2011)
Implementation of european trends regarding the reduction of air pollutants in Ukraine
by: S. P. Shapoval, et al.
Published: (2024)
by: S. P. Shapoval, et al.
Published: (2024)
Implementation of european trends regarding the reduction of air pollutants in Ukraine
by: Shapoval, Stepan P., et al.
Published: (2024)
by: Shapoval, Stepan P., et al.
Published: (2024)
Landuse Patterns, Air Quality and Bird Diversity in Urban Landscapes of Delhi
by: Kumar, V., et al.
Published: (2022)
by: Kumar, V., et al.
Published: (2022)
Landuse Patterns, Air Quality and Bird Diversity in Urban Landscapes of Delhi
by: Kumar, V., et al.
Published: (2022)
by: Kumar, V., et al.
Published: (2022)
Features of autoelectronic emission in the superthin gap of the gas-discharge cell in ionization semi-conductor the chamber
by: 3. X. Khajdarov
Published: (2006)
by: 3. X. Khajdarov
Published: (2006)
Mechanical behaviour of cooled bodies with account of heat energy emission
by: O. R. Hachkevych, et al.
Published: (2010)
by: O. R. Hachkevych, et al.
Published: (2010)
CFD-simulation of radiator for air cooling of microprocessors in a limitided space
by: V. E. Trofimov, et al.
Published: (2016)
by: V. E. Trofimov, et al.
Published: (2016)
The Technology of Nitrogen Oxide Emissions Reduction at Pulverized Coal Burning
by: N. I. Dunaievska, et al.
Published: (2016)
by: N. I. Dunaievska, et al.
Published: (2016)
The Method and Burning Device for Phasic Combustion of Gaseous and Liquid Fuels with Fuel and Air Prolonged Mixing
by: V. S. Pikashov, et al.
Published: (2012)
by: V. S. Pikashov, et al.
Published: (2012)
An approach to behavioral software models refinement using design patterns
by: Chebanyuk, O.B.
Published: (2025)
by: Chebanyuk, O.B.
Published: (2025)
Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
by: Шестак, Б. К.
Published: (2026)
by: Шестак, Б. К.
Published: (2026)
Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
by: Шестак, Б. К.
Published: (2026)
by: Шестак, Б. К.
Published: (2026)
Possibilities of friction force and sidewall sticking reduction on directional and horizontal parts of deep well hole
by: Ye. Chernova, et al.
Published: (2017)
by: Ye. Chernova, et al.
Published: (2017)
Similar Items
-
Enhancement of Aeroengine Combustion Chamber Air Cooling Holes Design for Emission Reduction and Pattern Factor Control
by: Hajivand, Masoud
Published: (2025) -
Reduction of natural gas consumption and reduction of emissions with combustion products in municipal heat supply
by: O. I. Sihal, et al.
Published: (2019) -
Experience of the Development of Burners, Chambers and Technologies for Reducing Emissions of Nitrogen Oxides by Boilers During the Combustion of Natural Gas
by: Ja. Sigal, et al.
Published: (2019) -
Reduction of Nitrogen Oxides Effluents within an Open Flame by Input the Water Vapour into Combustion Air Flow
by: B. S. Soroka, et al.
Published: (2018) -
About a co-combustion technology for brown coal and straw in combustion chambers with a ?xed bed
by: A. S. Matvejchuk
Published: (2012)