Buchumschlag

Features of the Calculated Determination of the Thermal State of the Turbo Generator Brush-Contact Device

The features of the calculation of the thermal state of the turbo generator brush-contact device are discussed in this paper. The author provides an algorithm for analytical calculation of the device, determines the expected temperatures of the elements provided that additional filters are installed...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
1. Verfasser:	Коврига, А. Є.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2025
Online Zugang:	https://journals.uran.ua/jme/article/view/321238
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Features of the Calculated Determination of the Thermal State of the Turbo Generator Brush-Contact Device
von: Коврига, А. Є.
Veröffentlicht: (2025)

Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
von: Tretiak, O. V.
Veröffentlicht: (2018)

Mathematical simulation of thermal condition of a brush contact device in a three-dimensional setting
von: Tretiak, O. V.
Veröffentlicht: (2018)

DETERMINATION OF ELECTROMAGNETIC PARAMETERS AND PHASE RELATIONS IN TURBO-GENERATORS BY THE AUTOMATED CALCULATION OF THE MAGNETIC FIELD IN THE SOFTWARE ENVIRONMENT FEMM
von: Milykh, V. I., et al.
Veröffentlicht: (2016)

A TURBO-GENERATOR DESIGN SYNTHESIS BASED ON THE NUMERICAL-FIELD CALCULATIONS AT VARYING THE NUMBER OF STATOR SLOTS
von: Milykh, V. I.
Veröffentlicht: (2016)

DETERMINATION OF THE FEATURES OF THERMAL DECOMPOSITION OF SUNFLOWER HUSK IN A FLUIDIZED BED
von: Haponych, L., et al.
Veröffentlicht: (2024)

Wet Steam Flow Ionization and Prospects to Practically Apply Electrical Discharge Devices in Turbo Installations
von: Tarelin, Anatolii O., et al.
Veröffentlicht: (2019)

Wet Steam Flow Ionization and Prospects to Practically Apply Electrical Discharge Devices in Turbo Installations
von: Tarelin, Anatolii O., et al.
Veröffentlicht: (2019)

ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
von: Chenchevoi, V., et al.
Veröffentlicht: (2017)

Automated calculation complex for analysis of operating regimes of turbo-installations of power and cogeneration plants
von: Дворников, А. А.
Veröffentlicht: (2016)

Automated calculation complex for analysis of operating regimes of turbo-installations of power and cogeneration plants
von: Дворников, А. А.
Veröffentlicht: (2016)

On the choice of the zeroth approximation in the determination of a complex contact
von: Dubovenko, Yu. I., et al.
Veröffentlicht: (2013)

Forecasting of thermal performances of working bodies heat engineering of devices
von: Левтеров, А. М., et al.
Veröffentlicht: (2015)

Forecasting of thermal performances of working bodies heat engineering of devices
von: Левтеров, А. М., et al.
Veröffentlicht: (2015)

CALCULATION AND EXPERIMENTAL DETERMINATION OF CRITICAL SECTIONS OF ELECTRIC WIRES AND CABLES IN THE CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT PULSE TECHNIQUE
von: Baranov, M. I.
Veröffentlicht: (2019)

COMSOL MULTIPHYSICS BASED CALCULATION OF CONTACT PRESSURE IN MECHANICAL SYSTEMS
von: Baida, E. I.
Veröffentlicht: (2013)

MULTIPHYSICAL NUMERICAL ANALYSIS OF ELECTROMAGNETIC DEVICES: STATE-OF-THE-ART AND GENERALIZATION
von: Pantelyat, Michael G.
Veröffentlicht: (2013)

Energy efficiency of cooling systems of thermal stresses the most powerful turbo units with supercritical and supercritical steam parameters of the initial
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

Energy efficiency of cooling systems of thermal stresses the most powerful turbo units with supercritical and supercritical steam parameters of the initial
von: Переверзев, Д. А., et al.
Veröffentlicht: (2016)

FINITE ELEMENT TECHNIQUE FOR SOLUTION OF THERMO-CONTACT PROBLEMS AND ITS APPLICATION IN NUMERICAL ANALYSIS OF DEVICES WORKING WITH INDUCTION HEATING
von: Pantelyat, Michael G., et al.
Veröffentlicht: (2016)

Determination of the Thermal and Stress-Strain State of the Medium-Pressure Rotor of the T-100/120-130 Turbine after Damage to the Blades
von: Черноусенко, О. Ю., et al.
Veröffentlicht: (2024)

Determination of the Thermal and Stress-Strain State of the Medium-Pressure Rotor of the T-100/120-130 Turbine after Damage to the Blades
von: Черноусенко, О. Ю., et al.
Veröffentlicht: (2024)

Calculation of plate heat exchanger with different channel types in one device
von: Хавин, Г. Л.
Veröffentlicht: (2016)

Calculation of plate heat exchanger with different channel types in one device
von: Хавин, Г. Л.
Veröffentlicht: (2016)

Development of a Methodology for Calculating the Stress State and Resource of a Hydrogen Generator Using the Finite Element Method
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2022)

Development of a Methodology for Calculating the Stress State and Resource of a Hydrogen Generator Using the Finite Element Method
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2022)

Cyclic operation of the device of thermal energy extraction from the waste oil and gas wells
von: Buchko, A., et al.
Veröffentlicht: (2017)

Efficient arrangement of the inactive part of turbo-alternator – a main means to optimization massogabaritnyh parameter of the turbo-alternator
von: Кузьмин, В. В., et al.
Veröffentlicht: (2016)

Efficient arrangement of the inactive part of turbo-alternator – a main means to optimization massogabaritnyh parameter of the turbo-alternator
von: Кузьмин, В. В., et al.
Veröffentlicht: (2016)

Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)

Analysis of Stress-Strain State and Contact Pressures on Surfaces of Kaplan Runner Blade Bearing Bronze Bushes
von: Субботин, В. Г., et al.
Veröffentlicht: (2021)

CFD Simulation of Thermal and Thermally Stressed State of the DKVR-10-13 Boiler Drum
von: Черноусенко, О. Ю., et al.
Veröffentlicht: (2026)

CFD Simulation of Thermal and Thermally Stressed State of the DKVR-10-13 Boiler Drum
von: Черноусенко, О. Ю., et al.
Veröffentlicht: (2026)

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
von: Ліщук, С. Р., et al.
Veröffentlicht: (2024)

Calculation Study of Thermal Stresses in the Medium-Pressure Rotor of the K-200-130 Turbine During Start-Up from a Cold State
von: Ліщук, С. Р., et al.
Veröffentlicht: (2024)

Features of representations of exponential functions in HNS of high dimensions by software of hypercomplex calculations
von: Боярінова, Ю. Є., et al.
Veröffentlicht: (2021)

ANALYSIS OF METHODS FOR MONITORING OF EXISTING ENERGY OBJECTS GROUNDING DEVICES STATE AT THE PRESENT STAGE
von: Koliushko, D. G., et al.
Veröffentlicht: (2019)

Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)

Choosing the operating condition and the design values of the device for extraction of thermal energy from waste oil and gas well
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2016)

SUBSTANTIATION OF THE METHOD OF DETERMINATION OF THERMAL POTENTIAL OF GEOTHERMAL LAYER DEPOSITS
von: Morozov, Yu., et al.
Veröffentlicht: (2021)