Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
Carbon fiber reinforced polymer (CFRP) composites are widely employed in aerospace, automotive, and civil infrastructure applications owing to their exceptional specific stiffness and strength. Delamination is one of the critical parameter in composite materials. However, interlaminar delamination r...
Gespeichert in:
| Datum: | 2026 |
|---|---|
| Ключові слова: | keywords |
| 1. Verfasser: | Imran, Muhammad |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2026
|
| Online Zugang: | https://journals.uran.ua/jme/article/view/359590 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026)
von: Imran, Muhammad
Veröffentlicht: (2026)
Polypropylene fibers filled with carbon nanotubes: mechanical properties and biocompatibility
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2013)
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2013)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Influence of Different Preparation Processes on the Mechanical Properties of Carbon Nanotube-Reinforced Copper Matrix Composites
von: Guo, C.H., et al.
Veröffentlicht: (2015)
von: Guo, C.H., et al.
Veröffentlicht: (2015)
Modification of epoxy binder polymer composite by multilayer carbon nanotubes
von: D. V. Onishchenko, et al.
Veröffentlicht: (2014)
von: D. V. Onishchenko, et al.
Veröffentlicht: (2014)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
von: Avramov, Kostiantyn V., et al.
Veröffentlicht: (2025)
Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
von: K. V. Avramov, et al.
Veröffentlicht: (2020)
von: K. V. Avramov, et al.
Veröffentlicht: (2020)
Properties of polyethylene–carbon nanotubes composites
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2017)
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2017)
Modelling of the structural relaxation in the glassing area of polymer composite materials filled by carbon nanotubes
von: R. Dinzhos, et al.
Veröffentlicht: (2015)
von: R. Dinzhos, et al.
Veröffentlicht: (2015)
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
von: Sheng, L.Y., et al.
Veröffentlicht: (2019)
Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Electrical conductivity of polymer/carbon nanotubes nanocomposites at low temperatures
von: L. Bardash, et al.
Veröffentlicht: (2018)
von: L. Bardash, et al.
Veröffentlicht: (2018)
Positron Spectroscopy of Polytetrafluoroethylene—Carbon Nanotubes Composites
von: M. M. Nyshchenko, et al.
Veröffentlicht: (2013)
von: M. M. Nyshchenko, et al.
Veröffentlicht: (2013)
Simulation of the Percolation Behavior of the Properties of Polymer Nanocomposites Filled with Carbon Nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2022)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2022)
Modification of cement-concrete mixtures with polymer additives, structured carbon nanotubes
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2022)
von: V. V. Trachevskyi, et al.
Veröffentlicht: (2022)
Structural features of polymer nanocomposites based on polypropylene glycol and carbon nanotubes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2015)
Cytotoxicity of carbon nanotubes
von: Yu. Sementsov, et al.
Veröffentlicht: (2012)
von: Yu. Sementsov, et al.
Veröffentlicht: (2012)
Cytotoxicity of Carbon Nanotubes
von: Sementsov, Yu., et al.
Veröffentlicht: (2012)
von: Sementsov, Yu., et al.
Veröffentlicht: (2012)
Synthesis and magnetic properties of composites type of carbon nanotube/magnetite and activated carbon/magnite
von: V. M. Mishchenko, et al.
Veröffentlicht: (2015)
von: V. M. Mishchenko, et al.
Veröffentlicht: (2015)
Electrophysical properties of carbon nanotubes/NiCo composites
von: O. M. Lisova, et al.
Veröffentlicht: (2018)
von: O. M. Lisova, et al.
Veröffentlicht: (2018)
The electronic properties of doped single walled carbon nanotubes and carbon nanotube sensors
von: Tetik, E.
Veröffentlicht: (2014)
von: Tetik, E.
Veröffentlicht: (2014)
Investigation of the low-temperature mechanical behavior of elastomers and their carbon nanotube composites using microindentation
von: L. S. Fomenko, et al.
Veröffentlicht: (2019)
von: L. S. Fomenko, et al.
Veröffentlicht: (2019)
Investigation of the low-temperature mechanical behavior of elastomers and their carbon nanotube composites using microindentation
von: Fomenko, L.S., et al.
Veröffentlicht: (2019)
von: Fomenko, L.S., et al.
Veröffentlicht: (2019)
Influence of noncovalent modification of carbon nanotubes by polyethylene glycol on their distribution in the polymer matrix
von: E. Lysenkov, et al.
Veröffentlicht: (2022)
von: E. Lysenkov, et al.
Veröffentlicht: (2022)
Dispersions of carbon nanotubes in nematic liquid crystals: effects of nanotube geometry
von: Lisetski, L.N., et al.
Veröffentlicht: (2011)
von: Lisetski, L.N., et al.
Veröffentlicht: (2011)
System of ultrasonic non-destructive testing of carbon fiber composite defects
von: Xuerui Wang, et al.
Veröffentlicht: (2018)
von: Xuerui Wang, et al.
Veröffentlicht: (2018)
Kinetic properties of polytetrafluorоethylene – carbon nanotube composites
von: Garkusha, O. M., et al.
Veröffentlicht: (2008)
von: Garkusha, O. M., et al.
Veröffentlicht: (2008)
Catalytic properties of carbon nanotubes
von: K. V. Voitko
Veröffentlicht: (2014)
von: K. V. Voitko
Veröffentlicht: (2014)
Collective excitations in carbon nanotubes
von: Korostil, A.
Veröffentlicht: (2010)
von: Korostil, A.
Veröffentlicht: (2010)
Collective excitations in carbon nanotubes
von: Korostil, A.
Veröffentlicht: (2011)
von: Korostil, A.
Veröffentlicht: (2011)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Effect of impurities on the electric conductivity and magnetoresistance in carbon nanotubes
von: A. D. Shevchenko, et al.
Veröffentlicht: (2014)
von: A. D. Shevchenko, et al.
Veröffentlicht: (2014)
Effect of impurities on the electric conductivity and magnetoresistance in carbon nanotubes
von: A. D. Shevchenko, et al.
Veröffentlicht: (2014)
von: A. D. Shevchenko, et al.
Veröffentlicht: (2014)
The influence of carbon nanotubes on the sensitivity of humidity sensors based on organic-inorganic polymer materials
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
Structure-property relationships in polymer nanocomposites based on cross-linked polyurethanes and carbon nanotubes
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
von: Lysenkov, E.A., et al.
Veröffentlicht: (2015)
The influence of carbon nanotubes on mechanical properties of the cross-linked polyurethanes
von: E. A. Lysenkov, et al.
Veröffentlicht: (2017)
von: E. A. Lysenkov, et al.
Veröffentlicht: (2017)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Iodine sorption capacity of carbon fiber cloth materials and granular activated carbons
von: Gurin, I.V., et al.
Veröffentlicht: (2022)
von: Gurin, I.V., et al.
Veröffentlicht: (2022)
Ähnliche Einträge
-
Effect of Carbon Nanotube Embedding on the Mechanical Properties of Delaminated Carbon Fiber Reinforced Polymer Composite Plates
von: Imran, Muhammad
Veröffentlicht: (2026) -
Polypropylene fibers filled with carbon nanotubes: mechanical properties and biocompatibility
von: Yu. I. Sementsov, et al.
Veröffentlicht: (2013) -
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022) -
Influence of Different Preparation Processes on the Mechanical Properties of Carbon Nanotube-Reinforced Copper Matrix Composites
von: Guo, C.H., et al.
Veröffentlicht: (2015) -
Modification of epoxy binder polymer composite by multilayer carbon nanotubes
von: D. V. Onishchenko, et al.
Veröffentlicht: (2014)