Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
We investigate the effect of a heat source on the development of curvilinear crack in the elongated plate in view of plastic deformations in the crack end zones. For retardate the curvilinear crack growth on the crack path in vicinity of the both ends by heating of domains S1 and S2 to temperature T...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| 1. Verfasser: | Мустафаев, Азер Байрам оглы |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2015
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/44397 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015)
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
Modeling of shear crack nucleation in a body, weakening by periodic system of circular holes
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
von: Гасанов, Ф. Ф.
Veröffentlicht: (2013)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
Wheeled Vehicle Brake Drum Computation by Fracture Toughness Criteria
von: Askerov, Sahib A.
Veröffentlicht: (2025)
von: Askerov, Sahib A.
Veröffentlicht: (2025)
On types of local deformations of quadratic forms
von: Bondarenko, Vitaliy M.
Veröffentlicht: (2018)
von: Bondarenko, Vitaliy M.
Veröffentlicht: (2018)
Fracture of non-uniformly heated annular disk
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
Fracture of non-uniformly heated annular disk
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
von: Калантарлы, Н. М.
Veröffentlicht: (2014)
The solution to the plastic usage problems; a strong campaign for innovative waste management
von: Rosalyn, Maria Eva, et al.
Veröffentlicht: (2019)
von: Rosalyn, Maria Eva, et al.
Veröffentlicht: (2019)
Management of Plastic Waste Processing and Recycling in Water Pollution Reduction
von: Dolchinkov, Nikolay
Veröffentlicht: (2025)
von: Dolchinkov, Nikolay
Veröffentlicht: (2025)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
Exact solution of contact problem for partial interaction of width variable slit faces at temperature field action
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2014)
Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
Stress-Strain State of Steam Turbine Lock Joint under Plastic Deformation
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
von: Palkov, Ihor A., et al.
Veröffentlicht: (2021)
DYNAMICS OF HIGH-VOLTAGE PLASTIC-INSULATED POWER CABLE HEATING
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2013)
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2013)
NUMERICAL COMPUTATION OF ELECTRIC FIELDS IN PRESENCE OF CURVILINEAR INTERFACE BETWEEN CONDUCTIVE AND NON-CONDUCTIVE MEDIA
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
von: Sokol, Ye. I., et al.
Veröffentlicht: (2016)
CONTROL OF ELECTRIC SHIPS’ PROPULSION MOTORS WHEN MOVING ON CURVILINEAR TRAJECTORY
von: Yarovenko, V. A., et al.
Veröffentlicht: (2020)
von: Yarovenko, V. A., et al.
Veröffentlicht: (2020)
Розподілена оптоелектронна система екологічного моніторингу в режимі реального часу
von: КОЖЕМ'ЯКО, АНДРІЙ ВІКТОРОВИЧ, et al.
Veröffentlicht: (2017)
von: КОЖЕМ'ЯКО, АНДРІЙ ВІКТОРОВИЧ, et al.
Veröffentlicht: (2017)
Kinematics of formation of the Ukrainian Shield during the period 1,80-1,73 Ga ago according to the results of studies of rock fracturing of the Korosten and Korsun-Novomirgorod plutons
von: Gintov, O.B., et al.
Veröffentlicht: (2014)
von: Gintov, O.B., et al.
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
von: Zaytsev, Boris F., et al.
Veröffentlicht: (2018)
von: Zaytsev, Boris F., et al.
Veröffentlicht: (2018)
Dynamic Processes During the Through-plastic-damper Shock Interaction of Rocket Fairing Separation System Components
von: Zaytsev, Boris F., et al.
Veröffentlicht: (2018)
von: Zaytsev, Boris F., et al.
Veröffentlicht: (2018)
Modeling of partial closure of slots system in perforated isotropic medium reinforced by stringers
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Effect of local temperature field on retardation of curvilinear crack with allowance of plastic deformation
von: Мустафаев, Азер Байрам оглы
Veröffentlicht: (2015) -
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016) -
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016) -
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020) -
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)