Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
Loses associated with the leakages through the turbine radial sealing are usually considered while calculating efficiency of the whole turbine stage. Wherein, massflow coefficient of the sealing often is estimated with Stodola’s equations, which includes empirical coefficients substantially dependin...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | Бойко, А. В., Усатый, А. П., Максюта, Д. И. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2015
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/51272 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
von: Бойко, А. В., et al.
Veröffentlicht: (2015)
von: Бойко, А. В., et al.
Veröffentlicht: (2015)
Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
von: Shevchenko, Serhii S.
Veröffentlicht: (2025)
von: Shevchenko, Serhii S.
Veröffentlicht: (2025)
Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
von: Shevchenko, Serhii S.
Veröffentlicht: (2025)
von: Shevchenko, Serhii S.
Veröffentlicht: (2025)
FALSE SEALS OF OIL-AND-GAS POOLS - THE POTENTIAL UNCONVENTIONAL SOURCE OF GAS
von: LUKIN, A. Ye.
Veröffentlicht: (2011)
von: LUKIN, A. Ye.
Veröffentlicht: (2011)
Modernization of electrical equipment as a way of reducing the risks of emergency situations at nuclear power plants
von: Levchenko, Larysa O., et al.
Veröffentlicht: (2023)
von: Levchenko, Larysa O., et al.
Veröffentlicht: (2023)
Physical Model and Calculation of Face Packing Seals
von: Shevchenko, Serhii S.
Veröffentlicht: (2021)
von: Shevchenko, Serhii S.
Veröffentlicht: (2021)
Physical Model and Calculation of Face Packing Seals
von: Shevchenko, Serhii S.
Veröffentlicht: (2021)
von: Shevchenko, Serhii S.
Veröffentlicht: (2021)
Integrated analysis of fault sealing capabilities when studying and mapping hydrocarbon traps in the Dnieper-Donets Depression
von: Okrepkyj, O. I., et al.
Veröffentlicht: (2018)
von: Okrepkyj, O. I., et al.
Veröffentlicht: (2018)
Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)
Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)
Improving the efficiency of radial-axial rotors of turbine stages through the use of complex lean of trailing edges
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
Improving the efficiency of radial-axial rotors of turbine stages through the use of complex lean of trailing edges
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
Analytical method for profiling of radial stator blades of turbine stages
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
Analytical method for profiling of radial stator blades of turbine stages
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)
Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)
von: Луговая, С. О., et al.
Veröffentlicht: (2015)
Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)
von: Луговая, С. О., et al.
Veröffentlicht: (2015)
Estimation of quality of reference patterns for the correlation-extreme navigation systems
von: Yuzefovych, V. V., et al.
Veröffentlicht: (2014)
von: Yuzefovych, V. V., et al.
Veröffentlicht: (2014)
PRINCIPLES OF PRECISION PARAMETRIC REDUCTION FOR MATHEMATICAL MODELS
von: Sterten, Jo, et al.
Veröffentlicht: (2015)
von: Sterten, Jo, et al.
Veröffentlicht: (2015)
A method for improving the expert estimates consistency in the dialogue process
von: Roik, P. D., et al.
Veröffentlicht: (2018)
von: Roik, P. D., et al.
Veröffentlicht: (2018)
Models and algorithms for the analysis of structural reliability of complex multi-organizational technical systems
von: Dodonov, A. G., et al.
Veröffentlicht: (2015)
von: Dodonov, A. G., et al.
Veröffentlicht: (2015)
Estimation of radial and axial forces dependences from displacements of the rotor magnet in the radial magnetic bearing with two circular permanent magnets
von: Мартыненко, Г. Ю.
Veröffentlicht: (2016)
von: Мартыненко, Г. Ю.
Veröffentlicht: (2016)
Estimation of radial and axial forces dependences from displacements of the rotor magnet in the radial magnetic bearing with two circular permanent magnets
von: Мартыненко, Г. Ю.
Veröffentlicht: (2016)
von: Мартыненко, Г. Ю.
Veröffentlicht: (2016)
The estimation of thermostressed state of boiler drum TGME-464
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2015)
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2015)
The estimation of thermostressed state of boiler drum TGME-464
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2015)
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2015)
The numerical analyzis for unsteady loads and elastic behaviour of the blades in seven stage axial compressor
von: Колодяжная, Л. В.
Veröffentlicht: (2016)
von: Колодяжная, Л. В.
Veröffentlicht: (2016)
The numerical analyzis for unsteady loads and elastic behaviour of the blades in seven stage axial compressor
von: Колодяжная, Л. В.
Veröffentlicht: (2016)
von: Колодяжная, Л. В.
Veröffentlicht: (2016)
Estimation Method for Compatibility of Normative Documents
von: Mezentsev, O. V.
Veröffentlicht: (2014)
von: Mezentsev, O. V.
Veröffentlicht: (2014)
Consistency index evaluation for estimates of experts, taking into account their competence for group decision making
von: Roik, P. D.
Veröffentlicht: (2018)
von: Roik, P. D.
Veröffentlicht: (2018)
COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
von: Kovalenko , M., et al.
Veröffentlicht: (2024)
von: Kovalenko , M., et al.
Veröffentlicht: (2024)
COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)
Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
von: Larbi, B., et al.
Veröffentlicht: (2023)
von: Larbi, B., et al.
Veröffentlicht: (2023)
Analysis of static and dynamic strength of the axial fan considering aerodynamic properties of the flow and nonuniformity of temperature field
von: Мартыненко, В. Г., et al.
Veröffentlicht: (2015)
von: Мартыненко, В. Г., et al.
Veröffentlicht: (2015)
Analysis of static and dynamic strength of the axial fan considering aerodynamic properties of the flow and nonuniformity of temperature field
von: Мартыненко, В. Г., et al.
Veröffentlicht: (2015)
von: Мартыненко, В. Г., et al.
Veröffentlicht: (2015)
AXIALLY SYMMETRIC MODES IN AN OPEN RESONATOR
von: Kuzmychov, I. K., et al.
Veröffentlicht: (2025)
von: Kuzmychov, I. K., et al.
Veröffentlicht: (2025)
Stressed state in a finite cylinder with a circular crack at non-stationary torsion
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
Stressed state in a finite cylinder with a circular crack at non-stationary torsion
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
Estimation of the Performance of Typical Project Tasks at Enterprises with a Functional Organization Structure
von: Kuzminykh, V. A., et al.
Veröffentlicht: (2012)
von: Kuzminykh, V. A., et al.
Veröffentlicht: (2012)
Methodological scheme for ranking interval expert estimates of the territories hydrocarbon potential
von: Popov, Mykhailo, et al.
Veröffentlicht: (2019)
von: Popov, Mykhailo, et al.
Veröffentlicht: (2019)
Slot opening displacement technique for cogging torque reduction of axial flux brushless DC motor for electric two-wheeler application
von: Patel, A. N.
Veröffentlicht: (2023)
von: Patel, A. N.
Veröffentlicht: (2023)
Ähnliche Einträge
-
Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
von: Бойко, А. В., et al.
Veröffentlicht: (2015) -
Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
von: Shevchenko, Serhii S.
Veröffentlicht: (2025) -
Design Improvement of Stuffing Box Seals of Centrifugal Pump Shafts, Based on the Study of the Sealing Mechanism Physical Model
von: Shevchenko, Serhii S.
Veröffentlicht: (2025) -
FALSE SEALS OF OIL-AND-GAS POOLS - THE POTENTIAL UNCONVENTIONAL SOURCE OF GAS
von: LUKIN, A. Ye.
Veröffentlicht: (2011) -
Modernization of electrical equipment as a way of reducing the risks of emergency situations at nuclear power plants
von: Levchenko, Larysa O., et al.
Veröffentlicht: (2023)