Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
Engineering method for cracks kinetic calculation of plane and axisymmetric objects under multimode cyclic load is proposed. Concept of scattered damage accumulation is used. Elastic thermostress state for all loading regimes near crack is determined by finite element method for multiple fixed crack...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | Шульженко, Н. Г., Гонтаровский, П. П., Гармаш, Н. Г., Мележик, И. И. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2015
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/57540 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Steam turbine disk resource with initial defects of discharge openings area under creep
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Steam turbine disk resource with initial defects of discharge openings area under creep
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
Calculated Assessment of Crack Development Under Cyclic Loading of the Plate Using the Parameters of Dispersed Damage of the Material
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2024)
Cyclicity of Control Operations on an Arbitrary Modulus
von: Mаtоv, О. Ya., et al.
Veröffentlicht: (2013)
von: Mаtоv, О. Ya., et al.
Veröffentlicht: (2013)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2015)
von: N. G. Shulzhenko, et al.
Veröffentlicht: (2015)
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Minimization of the Stressed State of a Stringer Plate with a Hole and Rectilinear Cracks
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2019)
Resonance subharmonic vibrations of beam with breathing fatigue crack
von: Аврамов, К. В., et al.
Veröffentlicht: (2016)
von: Аврамов, К. В., et al.
Veröffentlicht: (2016)
Resonance subharmonic vibrations of beam with breathing fatigue crack
von: Аврамов, К. В., et al.
Veröffentlicht: (2016)
von: Аврамов, К. В., et al.
Veröffentlicht: (2016)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
3D model-based evaluation of the vibration characteristics of a rotor with a transverse crack on rigid supports
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
3D model-based evaluation of the vibration characteristics of a rotor with a transverse crack on rigid supports
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
Experimental analysis of forced nonlinear vibrations of beams with breathing cracks
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
Experimental analysis of forced nonlinear vibrations of beams with breathing cracks
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
Stressed state in a finite cylinder with a circular crack at non-stationary torsion
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
Stressed state in a finite cylinder with a circular crack at non-stationary torsion
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
von: Demydov, O. V., et al.
Veröffentlicht: (2019)
Algorithms for Fast Computation of Cyclic Convolutions with the Notion of Discrete Signals Hypercomplex Numbers
von: Kalinovsky, Ya. O., et al.
Veröffentlicht: (2014)
von: Kalinovsky, Ya. O., et al.
Veröffentlicht: (2014)
Assessment of changes in the technical condition of damaged multi-story buildings by using artificial intelligence
von: Berchun, Yaroslav, et al.
Veröffentlicht: (2025)
von: Berchun, Yaroslav, et al.
Veröffentlicht: (2025)
Swelling of ferritic structural materials at high levels of damage doses and gas concentrations
von: Vasilenko, R.L., et al.
Veröffentlicht: (2020)
von: Vasilenko, R.L., et al.
Veröffentlicht: (2020)
Radiation damage in uranium target of the accelerator driven system “KIPT Neutron Source”
von: Gann, V.V., et al.
Veröffentlicht: (2021)
von: Gann, V.V., et al.
Veröffentlicht: (2021)
Mechanisms of radiation damage and development of structural materials for operating and advanced nuclear reactors
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021)
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021)
FUNCTIONAL DAMAGE OF RADIO ELECTRONIC SYSTEMS
von: Chernogor, L. F.
Veröffentlicht: (2021)
von: Chernogor, L. F.
Veröffentlicht: (2021)
Probabilistic estimation of the cracked shaft durability
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017)
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017)
Probabilistic estimation of the cracked shaft durability
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017)
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017)
Cyclic left and torsion-theoretic spectra of modules and their relations
von: Maloid-Glebova, Marta
Veröffentlicht: (2016)
von: Maloid-Glebova, Marta
Veröffentlicht: (2016)
Ähnliche Einträge
-
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015) -
Steam turbine disk resource with initial defects of discharge openings area under creep
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015) -
Steam turbine disk resource with initial defects of discharge openings area under creep
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015) -
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020) -
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)