Buchumschlag

Numerical analysis of the stress-strain state and an optimization of the adjustable blade hydroturbine cover model

A mathematical model of the adjustable blade hydroturbine cover was developed. Optimization with the help of the gradient method using the finite element method and cyclically symmetrical calculation scheme and numerical analysis of the stress-strain state of the cover construction were carried out....

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	Кантор, Б. Я., Шупиков, А. Н., Мисюра, C. Ю.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2016
Schlagworte:	УДК 539.3
Online Zugang:	https://journals.uran.ua/jme/article/view/76894
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Numerical analysis of the stress-strain state and an optimization of the adjustable blade hydroturbine cover model
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)

Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
von: Богомолов, В. А., et al.
Veröffentlicht: (2014)

Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
von: Богомолов, В. А., et al.
Veröffentlicht: (2014)

Stress-strain state research of fastener in hydraulic turbine flanged connections
von: Гнитько, В. И., et al.
Veröffentlicht: (2017)

Stress-strain state research of fastener in hydraulic turbine flanged connections
von: Гнитько, В. И., et al.
Veröffentlicht: (2017)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)

Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)

Static strength of thin-walled vessel with dents under internal pressure
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)

Static strength of thin-walled vessel with dents under internal pressure
von: Кантор, Б. Я., et al.
Veröffentlicht: (2016)

Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
von: Miroshnikov, Vitaliy Yu.
Veröffentlicht: (2019)

Investigation of the Stress Strain State of the Layer with a Longitudinal Cylindrical Thick-Walled Tube and the Displacements Given at the Boundaries of the Layer
von: Miroshnikov, Vitaliy Yu.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Estimation of durability and dynamic characteristics of driving wheel of turbine pump
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)

Estimation of durability and dynamic characteristics of driving wheel of turbine pump
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)

The stress-strain state of the lock joint of the operating blades of the turbine
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)

The research of the stress-strain state of the losk joint of the operating blades
von: Швецов, В. Л., et al.
Veröffentlicht: (2012)

The stress-strain state of the lock joint of the operating blades of the turbine
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)

The research of the stress-strain state of the losk joint of the operating blades
von: Швецов, В. Л., et al.
Veröffentlicht: (2012)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
von: Чугай, А. М.
Veröffentlicht: (2014)

Steady-state harmonic oscillations of a layer weakened by two openings with end faces covered by diaphragm (a symmetric case)
von: Ковалев, Ю. Д., et al.
Veröffentlicht: (2018)

Steady-state harmonic oscillations of a layer weakened by two openings with end faces covered by diaphragm (a symmetric case)
von: Ковалев, Ю. Д., et al.
Veröffentlicht: (2018)

Evolution of the stress-strain state and the dynamics of the Skip cover of the Ukrainian Carpathians
von: Gintov, O.B., et al.
Veröffentlicht: (2011)

The estimation of thermostressed state of boiler drum TGME-464
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2015)

The estimation of thermostressed state of boiler drum TGME-464
von: Гонтаровский, П. П., et al.
Veröffentlicht: (2015)

Vibration features of titanium alloy blades with erosive damages
von: Vorobiov, Yu. S., et al.
Veröffentlicht: (2019)

Vibration features of titanium alloy blades with erosive damages
von: Vorobiov, Yu. S., et al.
Veröffentlicht: (2019)

Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)

Stressed State of a Hollow Cylinder with a System of Cracks under Longitudinal Shear Harmonic Oscillations
von: Kyrylova, O. I., et al.
Veröffentlicht: (2019)

About a new solving method of the space problem for the elastic layer
von: Попов, Г. Я., et al.
Veröffentlicht: (2017)

About a new solving method of the space problem for the elastic layer
von: Попов, Г. Я., et al.
Veröffentlicht: (2017)

Investigation of the Stress State of a Composite in the Form of a Layer and a Half Space with a Longitudinal Cylindrical Cavity at Stresses Given on Boundary Surfaces
von: Miroshnikov, Vitalii Yu.
Veröffentlicht: (2019)

Investigation of the Stress State of a Composite in the Form of a Layer and a Half Space with a Longitudinal Cylindrical Cavity at Stresses Given on Boundary Surfaces
von: Miroshnikov, Vitalii Yu.
Veröffentlicht: (2019)

Study of the stressed state near the crack that initiates at the inclusion under longitudinal shift wave influence
von: Misharin, A. S., et al.
Veröffentlicht: (2019)

Study of the stressed state near the crack that initiates at the inclusion under longitudinal shift wave influence
von: Misharin, A. S., et al.
Veröffentlicht: (2019)

Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
von: Buganova, S. N., et al.
Veröffentlicht: (2018)

Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
von: Buganova, S. N., et al.
Veröffentlicht: (2018)