Optimal design of tubularbar structures subjected to corrosion
In the operation of buildings and structures in aggressive environments, their designs are subject to both mechanical and chemical resistance, in particular, corrosive wear. The impact of stress on the rate of corrosion in the design calculations for the first time was considered Dolinsky, investiga...
Gespeichert in:
| Datum: | 2016 |
|---|---|
| 1. Verfasser: | Фридман, М. М. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2016
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/78786 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016)
von: Фридман, М. М.
Veröffentlicht: (2016)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017)
von: Фридман, М. М.
Veröffentlicht: (2017)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)
von: Fridman, Мark M.
Veröffentlicht: (2020)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Optimal Design of Bending Elements in Conditions of Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2019)
von: Fridman, Мark M.
Veröffentlicht: (2019)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Stepwise Optimization of I-section Flexible Elements Under a Fuzzy Approach to Taking into Account Corrosion and Protective Properties of Anticorrosive Coating
von: Fridman, Mark M.
Veröffentlicht: (2018)
von: Fridman, Mark M.
Veröffentlicht: (2018)
Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)
von: Anosov, V. L., et al.
Veröffentlicht: (2019)
Solution of the Structural Optimization Problem of a Multiagent Approach Based Cutter Design
von: Anosov, V. L., et al.
Veröffentlicht: (2019)
von: Anosov, V. L., et al.
Veröffentlicht: (2019)
OPTIMIZATION TASKS OF THE COMBINED ENERGY SYSTEMS BY ECONOMIC INDICATORS
von: Kuznietsov, M., et al.
Veröffentlicht: (2019)
von: Kuznietsov, M., et al.
Veröffentlicht: (2019)
Optimization and reliability of the power supply systems of a compressor station
von: Benchouia , N., et al.
Veröffentlicht: (2021)
von: Benchouia , N., et al.
Veröffentlicht: (2021)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
Prediction of Flow Accelerated Corrosion of NPP Pipeline Elements by Network Simulation Method
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
von: Biblik, Irina V., et al.
Veröffentlicht: (2018)
FEATURES OF ELECTRIC MOTOR CHOICE FOR NUCLEAR POWER PLANT TECHNOLOGICAL OBJECTS
von: Pavlenko, T. P., et al.
Veröffentlicht: (2013)
von: Pavlenko, T. P., et al.
Veröffentlicht: (2013)
Optimization models of reconfiguring network structures
von: Kuzmychov, A. I., et al.
Veröffentlicht: (2017)
von: Kuzmychov, A. I., et al.
Veröffentlicht: (2017)
ОСОБЛИВОСТІ ЕЛЕКТРООСАДЖЕННЯ СПЛАВА КОБАЛЬТ–ВОЛЬФРАМ–РЕНІЙ
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
von: Yapontseva, Yuliya, et al.
Veröffentlicht: (2019)
Multi-objective optimal power flow based gray wolf optimization method
von: Mezhoud, N., et al.
Veröffentlicht: (2022)
von: Mezhoud, N., et al.
Veröffentlicht: (2022)
Calculation of Indicators of Reliability of Technical Systems by the Typical Structural Scheme Method
von: Zevin, Leonid I., et al.
Veröffentlicht: (2019)
von: Zevin, Leonid I., et al.
Veröffentlicht: (2019)
Calculation of Indicators of Reliability of Technical Systems by the Typical Structural Scheme Method
von: Zevin, Leonid I., et al.
Veröffentlicht: (2019)
von: Zevin, Leonid I., et al.
Veröffentlicht: (2019)
Models and algorithms for the analysis of structural reliability of complex multi-organizational technical systems
von: Dodonov, A. G., et al.
Veröffentlicht: (2015)
von: Dodonov, A. G., et al.
Veröffentlicht: (2015)
Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
von: Demin, Dmitriy
Veröffentlicht: (2014)
von: Demin, Dmitriy
Veröffentlicht: (2014)
Mathematical modeling in problem of searching optimal control of alloys obtaining for machine parts under uncertainty conditions
von: Demin, Dmitriy
Veröffentlicht: (2014)
von: Demin, Dmitriy
Veröffentlicht: (2014)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
Optimal Design of Smooth Shells both With and Without Taking into Account Initial Imperfections
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
von: Filatov, Heorhii V.
Veröffentlicht: (2020)
A quantitative assessment of the network structures functional resilience by analyzing of the sensitivity of an optimization model
von: Додонов, О. Г., et al.
Veröffentlicht: (2024)
von: Додонов, О. Г., et al.
Veröffentlicht: (2024)
Research of the optimization problem of structure hierarchical communication network with changing its parameters
von: Vasyanin, Volodymyr O., et al.
Veröffentlicht: (2024)
von: Vasyanin, Volodymyr O., et al.
Veröffentlicht: (2024)
Application of whale algorithm optimizer for unified power flow controller optimization with consideration of renewable energy sources uncertainty
von: Laifa, A., et al.
Veröffentlicht: (2023)
von: Laifa, A., et al.
Veröffentlicht: (2023)
Optimal power flow analysis under photovoltaic and wind power uncertainties using the blood-sucking leech optimizer
von: Bouhadouza, B., et al.
Veröffentlicht: (2025)
von: Bouhadouza, B., et al.
Veröffentlicht: (2025)
Improved grey wolf optimizer for optimal reactive power dispatch with integration of wind and solar energy
von: Laouafi, F.
Veröffentlicht: (2025)
von: Laouafi, F.
Veröffentlicht: (2025)
A review of earthquake precursors
von: Shcherbyna, S.V., et al.
Veröffentlicht: (2025)
von: Shcherbyna, S.V., et al.
Veröffentlicht: (2025)
Optimal combining of seismic data with different spectral characteristics
von: Tyapkin, Yu. K.
Veröffentlicht: (2019)
von: Tyapkin, Yu. K.
Veröffentlicht: (2019)
PARETO OPTIMAL SOLUTION OF MULTIOBJECTIVE SYNTHESIS OF ROBUST CONTROLLERS OF MULTIMASS ELECTROMECHANICAL SYSTEMS BASED ON MULTISWARM STOCHASTIC MULTIAGENT OPTIMIZATION
von: Nikitina, T. B.
Veröffentlicht: (2017)
von: Nikitina, T. B.
Veröffentlicht: (2017)
DESIGN RANGE CRITERIA IN DESIGNING OF CONTROLLED ASYNCHRONOUS MOTORS
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)
von: Petrushin, V. S., et al.
Veröffentlicht: (2014)
Solving the problem of optimal packing of homothetic ellipsoids into a container of minimal volume
von: Хлуд, О. М.
Veröffentlicht: (2016)
von: Хлуд, О. М.
Veröffentlicht: (2016)
Solving the problem of optimal packing of homothetic ellipsoids into a container of minimal volume
von: Хлуд, О. М.
Veröffentlicht: (2016)
von: Хлуд, О. М.
Veröffentlicht: (2016)
A NEW METHODOLOGY CALLED DICE GAME OPTIMIZER FOR CAPACITOR PLACEMENT IN DISTRIBUTION SYSTEMS
von: Dehghani, M., et al.
Veröffentlicht: (2020)
von: Dehghani, M., et al.
Veröffentlicht: (2020)
Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)
von: Somka, O. O., et al.
Veröffentlicht: (2014)
A COMPUTERIZED DIAGNOSTIC COMPLEX FOR RELIABILITY TESTING OF ELECTRIC MACHINES
von: Somka, O. O., et al.
Veröffentlicht: (2015)
von: Somka, O. O., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Optimal design of tubularbar structures subjected to corrosion
von: Фридман, М. М.
Veröffentlicht: (2016) -
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017) -
Optimal design of structures with a combined approach to corrosion accounting and protective properties of anticorrosive coatings
von: Фридман, М. М.
Veröffentlicht: (2017) -
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020) -
Optimization of Bendable I-Section Elements Subject to Corrosion and Material Damage
von: Fridman, Мark M.
Veröffentlicht: (2020)