Developing and investigating coating for protection from fretting-corrosion
Coatings with low adhesive activity for protection of steel and titanic parts from fretting-corrosion have been developed. It is set, that multi-layer vacuum-plasma coating is the most effective {Cr+(TiCr)N}x10, applying which provides increasing durability of a fatigue model in 20,30 folds at stres...
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2017
|
| Теми: | |
| Онлайн доступ: | https://journals.uran.ua/jme/article/view/91647 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Репозитарії
Energy Technologies & Resource Saving| Резюме: | Coatings with low adhesive activity for protection of steel and titanic parts from fretting-corrosion have been developed. It is set, that multi-layer vacuum-plasma coating is the most effective {Cr+(TiCr)N}x10, applying which provides increasing durability of a fatigue model in 20,30 folds at stress amplitude 200 MPa, in case of interaction of titanic counterbodies when coating is gummed only on a fatigue model, and also increasing durability of a fatigue model in 5,43 folds at stress amplitude 150 MPa, in case of steel parts’ interaction when coating is gummed on two models – fatigue and hold-down ones. |
|---|