Buchumschlag

Developing and investigating coating for protection from fretting-corrosion

Coatings with low adhesive activity for protection of steel and titanic parts from fretting-corrosion have been developed. It is set, that multi-layer vacuum-plasma coating is the most effective {Cr+(TiCr)N}x10, applying which provides increasing durability of a fatigue model in 20,30 folds at stres...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	Похмурський, В. І., Мацевітий, В. М., Калахан, О. С., Казак, І. Б., Вакуленко, К. В., Ляшок, С. В.
Format:	Artikel
Sprache:	Ukrainisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2017
Schlagworte:	УДК 620.193 621.793.1
Online Zugang:	https://journals.uran.ua/jme/article/view/91647
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Energy Technologies & Resource Saving

Institution

Energy Technologies & Resource Saving

Ähnliche Einträge

Developing and investigating coating for protection from fretting-corrosion
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)

Performance multilayer coatings in different environments and under cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)

Performance multilayer coatings in different environments and under cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)

Developing and investigating coating for protection from fretting-corrosion
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2010)

Influence of erosion on main operation features of the last stage movable blade of a low-pressure cylinder of a powerful steam turbine. Part 2. Prediction of vibration features of a movable blade of the last stage that change as a result of erosive wear a
von: Шубенко, А. Л., et al.
Veröffentlicht: (2016)

Influence of erosion on main operation features of the last stage movable blade of a low-pressure cylinder of a powerful steam turbine. Part 2. Prediction of vibration features of a movable blade of the last stage that change as a result of erosive wear a
von: Шубенко, А. Л., et al.
Veröffentlicht: (2016)

The method of calculating breaking capacity of a last stage rotor wheel of a powerful steam turbine by the derived condensed moisture
von: Ковальский, А. Э.
Veröffentlicht: (2016)

The method of calculating breaking capacity of a last stage rotor wheel of a powerful steam turbine by the derived condensed moisture
von: Ковальский, А. Э.
Veröffentlicht: (2016)

Some aspects of the heating of metal under cyclic loading
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016)

Some aspects of the heating of metal under cyclic loading
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016)

Features heating of steel shсh 15 under cyclic loading
von: Вакуленко, К. В.
Veröffentlicht: (2012)

Features heating of steel shсh 15 under cyclic loading
von: Вакуленко, К. В.
Veröffentlicht: (2012)

Increasing the fretting-corrosion fatigue of press joints in sea water
von: V. I. Babinets, et al.
Veröffentlicht: (2021)

Fretting-corrosion damage of steel units of a plane wing flap
von: V. O. Kralia, et al.
Veröffentlicht: (2010)

Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)

Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)

Effect of low-temperature oxidation and oxinitration on the VT22 titanium alloy fretting corrosion
von: O. I. Dukhota, et al.
Veröffentlicht: (2012)

Integrity of information in the systems of vibrations analysis and reliability of its selection
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)

Integrity of information in the systems of vibrations analysis and reliability of its selection
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)

Синтез нових піразолін-тіазолів та їх біологічна активність
von: Havrylyuk, D. Ya.
Veröffentlicht: (2014)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Restorative thermal treatment of shell parts of turbines during complex turbine reconstruction after continuous service
von: Любимов, А. А.
Veröffentlicht: (2016)

Restorative thermal treatment of shell parts of turbines during complex turbine reconstruction after continuous service
von: Любимов, А. А.
Veröffentlicht: (2016)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)

The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)

The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)

Development of investigations on corrosion and corrosion-mechanical fracture of metals and their protection methods (Review)
von: V. I. Pokhmurskyi
Veröffentlicht: (2018)

Protective properties of epoxy coating with zeolite-phosphate anti-corrosion pigment on aluminum alloy
von: B. М. Datsko, et al.
Veröffentlicht: (2024)

Corrosion. Corrosion protection of metals
von: N. R. Chervinska
Veröffentlicht: (2018)

Corrosion. Corrosion protection of metals
von: H. H. Veselivska
Veröffentlicht: (2012)

Corrosion. Corrosion protection of metals
von: N. R. Chervinska
Veröffentlicht: (2017)

Corrosion. Corrosion protection of metals
von: N. R. Chervinska
Veröffentlicht: (2016)

Corrosion. Corrosion protection of metals
von: H. H. Veselivska
Veröffentlicht: (2010)

Application of metal coatings for protecting welded joints prone to electro-chemical corrosion
von: S. F. Dudnik, et al.
Veröffentlicht: (2003)

The influence of ion nitriding modes on fretting-fatigue of 40X steel
von: P. V. Kaplun, et al.
Veröffentlicht: (2018)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
von: G. V. Tsybanev, et al.
Veröffentlicht: (2009)

Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)

Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)