Probabilistic estimation of the cracked shaft durability
The paper presents the numerical modeling of the turbine shaft with the extended defect zone. During the inspection of the shaft, there have been discovered numerous cracks disposed in the extended cylindrical domain. The most affected zone is placed near the flange coupling of the shaft with the tu...
Gespeichert in:
| Datum: | 2017 |
|---|---|
| Hauptverfasser: | Стрельникова, Е. А., Сирота, И. Г., Линник, А. В., Калембет, Л. А., Зархина, В. Н., Зайденварг, О. Л. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2017
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/96733 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Energy Technologies & Resource Saving |
Institution
Energy Technologies & Resource SavingÄhnliche Einträge
Probabilistic estimation of the cracked shaft durability
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017)
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017)
Computational Model for Durability Analysis of Structure Elements with Defects
von: Hnitko, Vasyl I., et al.
Veröffentlicht: (2020)
von: Hnitko, Vasyl I., et al.
Veröffentlicht: (2020)
Computational Model for Durability Analysis of Structure Elements with Defects
von: Hnitko, Vasyl I., et al.
Veröffentlicht: (2020)
von: Hnitko, Vasyl I., et al.
Veröffentlicht: (2020)
Experimental study on the durability of composite materials collectors of solar energy
von: Surzhyk, O.
Veröffentlicht: (2016)
von: Surzhyk, O.
Veröffentlicht: (2016)
Investigation of vibrations of shafting turbine unit T-250/300-240 at drawdown of supports and instantaneous imbalance shafting
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
Investigation of vibrations of shafting turbine unit T-250/300-240 at drawdown of supports and instantaneous imbalance shafting
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
INVESTIGATION OF MECHANICAL STRESSES IN THE DRIVE SHAFT OF MV VACUUM CIRCUIT BREAKER
von: Baida, E. I., et al.
Veröffentlicht: (2017)
von: Baida, E. I., et al.
Veröffentlicht: (2017)
APPROXIMATION OF UNIVERSAL CHARACTERISTICS OF HYDROTURBINES BY ENGINEERING GEOMETRY METHODS
von: Vasko, P.
Veröffentlicht: (2021)
von: Vasko, P.
Veröffentlicht: (2021)
Statistical Analysis of Employment and Health Impacts on Demographic Trends in the Kakheti Region of Georgia
von: Dokhturishvili, Nino, et al.
Veröffentlicht: (2025)
von: Dokhturishvili, Nino, et al.
Veröffentlicht: (2025)
Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)
Structural estimation of crack resistance of welded joints of high strength steels
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)
von: Бердникова, Елена Николаевна
Veröffentlicht: (2014)
Experimental analysis of forced nonlinear vibrations of beams with breathing cracks
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
Experimental analysis of forced nonlinear vibrations of beams with breathing cracks
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
von: Полищук, О. Ф., et al.
Veröffentlicht: (2017)
3D model-based evaluation of the vibration characteristics of a rotor with a transverse crack on rigid supports
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
3D model-based evaluation of the vibration characteristics of a rotor with a transverse crack on rigid supports
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2013)
ENERGY EFFICIENCY OF LOADING MODES OF LOW POWER HYDROTURBINES WITH VARIABLE WATER CONSUMPTION
von: Vasko, P.
Veröffentlicht: (2022)
von: Vasko, P.
Veröffentlicht: (2022)
Estimation of durability and dynamic characteristics of driving wheel of turbine pump
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
Estimation of durability and dynamic characteristics of driving wheel of turbine pump
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
von: Ефименко, В. Н., et al.
Veröffentlicht: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Effect of small recesses and swellings on cohesive crack growth in stretched by two concentrated forces plate
von: Гасанов, Шахин
Veröffentlicht: (2015)
von: Гасанов, Шахин
Veröffentlicht: (2015)
Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)
Methodological scheme for ranking interval expert estimates of the territories hydrocarbon potential
von: Popov, Mykhailo, et al.
Veröffentlicht: (2019)
von: Popov, Mykhailo, et al.
Veröffentlicht: (2019)
ASPECTS OF FURTHER DEVELOPMENT OF HYDROENERGY ACCORDING TO THE MATERIALS OF THE SCIENTIFIC AND PRACTICAL CONFERENCE «RENEWABLE ENERGY AND ENERGY EFFICIENCY IN THE XXI CENTURY» 2023
von: Vasko, P.
Veröffentlicht: (2023)
von: Vasko, P.
Veröffentlicht: (2023)
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
Closure of a curvilinear crack in sheet element under influence of temperature field
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
von: Мирсалимов, В. М., et al.
Veröffentlicht: (2016)
Прогнозування динамічних VaR і CVaR на основі квінтильної регресії з використанням металог розподілу
von: Zrazhevsky, Grigoriy, et al.
Veröffentlicht: (2021)
von: Zrazhevsky, Grigoriy, et al.
Veröffentlicht: (2021)
Класифікація методів обчислення та оцінювання мір ризику VaR і CVaR
von: Zrazhevska, Nataliia G., et al.
Veröffentlicht: (2016)
von: Zrazhevska, Nataliia G., et al.
Veröffentlicht: (2016)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Computational model of cracking in circular heated disk
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
von: Калантарлы, Наиля Мерадж гызы
Veröffentlicht: (2015)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Determination of the Equi-stress Hole Shape for a Stringer Plate Weakened by a Surface Crack
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
von: Mir-Salim-zade, Minavar V.
Veröffentlicht: (2020)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Equistrong hole shape for crack growth deceleration under longitudinal shear
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
von: Калантарлы, Н. М.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Modeling Crack Initiation in a Composite Under Bending
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
von: Hasanov, Sh. G.
Veröffentlicht: (2018)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Partial closure of rectilinear bridged cracks in stringer plate with a hole
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
von: Мир-Салим-заде, М. В.
Veröffentlicht: (2017)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Assessment of crack evolution under multi-mode cyclic loading based on material scattered damage analysis
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
von: Шульженко, Н. Г., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Probabilistic estimation of the cracked shaft durability
von: Стрельникова, Е. А., et al.
Veröffentlicht: (2017) -
Computational Model for Durability Analysis of Structure Elements with Defects
von: Hnitko, Vasyl I., et al.
Veröffentlicht: (2020) -
Computational Model for Durability Analysis of Structure Elements with Defects
von: Hnitko, Vasyl I., et al.
Veröffentlicht: (2020) -
Experimental study on the durability of composite materials collectors of solar energy
von: Surzhyk, O.
Veröffentlicht: (2016) -
Investigation of vibrations of shafting turbine unit T-250/300-240 at drawdown of supports and instantaneous imbalance shafting
von: Гармаш, Н. Г.
Veröffentlicht: (2015)