ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ
Benefits of using electronic current and voltage transformers in the "digital" substations is recognized all over the world and meets the requirements of the concept of Smart Grid. The interface between the electronic sensors and secondary systems requires considerable attention, because i...
Gespeichert in:
| Datum: | 2014 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки НАН України, Київ
2014
|
| Schlagworte: | |
| Online Zugang: | https://techned.org.ua/index.php/techned/article/view/1047 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technical Electrodynamics |
Institution
Technical Electrodynamics| id |
oai:ojs.pkp.sfu.ca:article-1047 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs.pkp.sfu.ca:article-10472023-01-08T17:30:56Z INTERFACE REQUIREMENTS TO HIGH VOLTAGE ELECTRONIC TRANSDUCERS ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ Танкевич, С.Е. electronic current transducer link protocol interoperability електронний вимірювальний перетворювач протокол передачі даних інформаційна сумісність Benefits of using electronic current and voltage transformers in the "digital" substations is recognized all over the world and meets the requirements of the concept of Smart Grid. The interface between the electronic sensors and secondary systems requires considerable attention, because it determines the interoperability level with secondary equipment in the substation. Interface requirements to high voltage electronic current and voltage transducers are defined. Some variants of connecting of current and voltage transformers to process bus of digital substation are considered. Specified on the feasibility of using fiber optic lines and installing merging unit in the field of substation near the current transformers. The description of the communication stack of transmission of instantaneous sampled values of current and voltage to the secondary equipment and a description of the reference frame of transmission of these values are given. The required transmission channel width is calculated. References 7, figure 1. В статті визначено та сформовано вимоги до цифрового інтерфейсу електронних вимірювальних перетворювачів струму та напруги. Вказано на доцільність використання оптоволоконної лінії зв’язку та встановлення електронного блоку безпосередньо на приєднанні. Подано опис комунікаційного стеку передавання вибіркових миттєвих значень струму та напруги до вторинного обладнання, опис еталонного кадру передавання цих значень та розраховано необхідну ширину пропускання каналу передавання даних. Бібл. 7, рис. 1. Інститут електродинаміки НАН України, Київ 2014-08-11 Article Article application/pdf https://techned.org.ua/index.php/techned/article/view/1047 Tekhnichna Elektrodynamika; No. 5 (2014): TEKHNICHNA ELEKTRODYNAMIKA; 068 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА; № 5 (2014): ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА; 068 2218-1903 1607-7970 uk https://techned.org.ua/index.php/techned/article/view/1047/923 Авторське право (c) 2023 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА https://creativecommons.org/licenses/by-nc-nd/4.0 |
| institution |
Technical Electrodynamics |
| baseUrl_str |
|
| datestamp_date |
2023-01-08T17:30:56Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
електронний вимірювальний перетворювач протокол передачі даних інформаційна сумісність |
| spellingShingle |
електронний вимірювальний перетворювач протокол передачі даних інформаційна сумісність Танкевич, С.Е. ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ |
| topic_facet |
electronic current transducer link protocol interoperability електронний вимірювальний перетворювач протокол передачі даних інформаційна сумісність |
| format |
Article |
| author |
Танкевич, С.Е. |
| author_facet |
Танкевич, С.Е. |
| author_sort |
Танкевич, С.Е. |
| title |
ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ |
| title_short |
ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ |
| title_full |
ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ |
| title_fullStr |
ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ |
| title_full_unstemmed |
ФОРМУВАННЯ ВИМОГ ДО ІНТЕРФЕЙСУ ЕЛЕКТРОННИХ ВИСОКОВОЛЬТНИХ ВИМІРЮВАЛЬНИХ ПЕРЕТВОРЮВАЧІВ СТРУМУ ТА НАПРУГИ |
| title_sort |
формування вимог до інтерфейсу електронних високовольтних вимірювальних перетворювачів струму та напруги |
| title_alt |
INTERFACE REQUIREMENTS TO HIGH VOLTAGE ELECTRONIC TRANSDUCERS |
| description |
Benefits of using electronic current and voltage transformers in the "digital" substations is recognized all over the world and meets the requirements of the concept of Smart Grid. The interface between the electronic sensors and secondary systems requires considerable attention, because it determines the interoperability level with secondary equipment in the substation. Interface requirements to high voltage electronic current and voltage transducers are defined. Some variants of connecting of current and voltage transformers to process bus of digital substation are considered. Specified on the feasibility of using fiber optic lines and installing merging unit in the field of substation near the current transformers. The description of the communication stack of transmission of instantaneous sampled values of current and voltage to the secondary equipment and a description of the reference frame of transmission of these values are given. The required transmission channel width is calculated. References 7, figure 1. |
| publisher |
Інститут електродинаміки НАН України, Київ |
| publishDate |
2014 |
| url |
https://techned.org.ua/index.php/techned/article/view/1047 |
| work_keys_str_mv |
AT tankevičse interfacerequirementstohighvoltageelectronictransducers AT tankevičse formuvannâvimogdoínterfejsuelektronnihvisokovolʹtnihvimírûvalʹnihperetvorûvačívstrumutanaprugi |
| first_indexed |
2025-12-02T15:20:27Z |
| last_indexed |
2025-12-02T15:20:27Z |
| _version_ |
1850410352514170880 |