Вплив вологовбирання та стану поверхні скловолокон на провідність та міцність скловолоконних композитів
In glass fibre reinforced epoxy and polyester resins the effect of adsorbed water, thermal treatment at 400°C and modification of the filament surface with polymethylsiloxane hydrophobisator on conductivity and ultimate compression strength has been investigated. It has been shown that the water ads...
Збережено в:
| Дата: | 2012 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2012
|
| Онлайн доступ: | https://www.cpts.com.ua/index.php/cpts/article/view/151 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Репозитарії
Chemistry, Physics and Technology of Surface| Резюме: | In glass fibre reinforced epoxy and polyester resins the effect of adsorbed water, thermal treatment at 400°C and modification of the filament surface with polymethylsiloxane hydrophobisator on conductivity and ultimate compression strength has been investigated. It has been shown that the water adsorption along the interface is dominant in the composites and its value determines the maximum conductivity. The changes of the surface state of filaments stimulate the variations of conductivity and ultimate strength. Their behavior depends on the number of molecules of lubricant and hydrophobisator on the filament surface. |
|---|