Одержання нанопoруватих адсорбентів з бурого вугілля лужною активацією із застосуванням теплового удару
Thermal-shock KOH activation has been used to produce nanoporous activated carbon from brown coal. The specific surface area, total pore volume, volumes of micropores and subnanometer pores were determined for activated carbons prepared at a varied alkali/coal ratio. Thermal shock was demonstrated t...
Gespeichert in:
| Datum: | 2012 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2012
|
| Online Zugang: | https://www.cpts.com.ua/index.php/cpts/article/view/155 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Institution
Chemistry, Physics and Technology of Surface| Zusammenfassung: | Thermal-shock KOH activation has been used to produce nanoporous activated carbon from brown coal. The specific surface area, total pore volume, volumes of micropores and subnanometer pores were determined for activated carbons prepared at a varied alkali/coal ratio. Thermal shock was demonstrated to be more efficient for the development of surface area with SBET equaling up to 1700 m2/g in comparison to 1000 m2/g for thermally-programmed heating. Increasing the KOH/coal ratio in the activated mixture increases the total pore volume, the micropore volume, and also the volume of subnanometer pores. Thermal shock produces nanoporosity at lower KOH/coal ratios than respective low-rate heating processes of KOH activation. |
|---|