Властивості поверхні флоат-скла після різного виду термічного оброблення
The surface properties of float glass tempered by air and by contact method have been studied. Air tempering was performed by traditional method, contact one was realized by a new method when a glass sample was fixed between the heat conductive plates and then heated to the temperature of tempering....
Збережено в:
| Дата: | 2014 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2014
|
| Теми: | |
| Онлайн доступ: | https://www.cpts.com.ua/index.php/cpts/article/view/310 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Репозитарії
Chemistry, Physics and Technology of Surface| Резюме: | The surface properties of float glass tempered by air and by contact method have been studied. Air tempering was performed by traditional method, contact one was realized by a new method when a glass sample was fixed between the heat conductive plates and then heated to the temperature of tempering. Further, the glass cooling was carried out by water spraying. The changes in thickness, density, and contact angle were examined before and after tempering. It has been found that after tempering the thickness of samples increases, and the density and the hydrophilicity decreases. After further heat treatment at the temperature of tempering followed by slow cooling it has been found that due to stress relaxation the density, thickness and contact angle decrease. |
|---|