Визначення ступеня окиснення молібдену механохімічно обробленого MoO3
The molybdenum oxidation degree in the MoO3 samples after mechanochemical treatment in various media (air, water, ethanol) has been studied by titration, EPR and XANES methods. It has been shown that molybdenum reduction proceeds in all the media used and its degree is determined by powder loading (...
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2015
|
| Теми: | |
| Онлайн доступ: | https://www.cpts.com.ua/index.php/cpts/article/view/351 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Репозитарії
Chemistry, Physics and Technology of Surface| Резюме: | The molybdenum oxidation degree in the MoO3 samples after mechanochemical treatment in various media (air, water, ethanol) has been studied by titration, EPR and XANES methods. It has been shown that molybdenum reduction proceeds in all the media used and its degree is determined by powder loading (rotation speed and time treatment) and medium nature. The XANES spectra demonstrate that MoO3 reduction leads to Mo5+ ions formation only. The maximal reduction degree is observed at treatment in ethanol. Existence of charged oxygen species located within Mo5+ environment was also shown. |
|---|