Синтез наноструктурованих порошків ітрій-алюмінієвого гранату, активованого іонами церію і їхнє застосування для формування наповнених полімерних оптичних композитів
A method of thermochemical synthesis of powders of yttrium-aluminum garnet doped with cerium (yellow phosphor) for polymer material filling with the purpose of optical composites creation has been developed. As initial ingredients for the synthesis of Y2.95Ce0.05Al5O12; Y(NO3)3•6Н2О, Al(NO3)3•9Н2О,...
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Російська |
| Опубліковано: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2017
|
| Теми: | |
| Онлайн доступ: | https://www.cpts.com.ua/index.php/cpts/article/view/432 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Chemistry, Physics and Technology of Surface |
Репозитарії
Chemistry, Physics and Technology of Surface| Резюме: | A method of thermochemical synthesis of powders of yttrium-aluminum garnet doped with cerium (yellow phosphor) for polymer material filling with the purpose of optical composites creation has been developed. As initial ingredients for the synthesis of Y2.95Ce0.05Al5O12; Y(NO3)3•6Н2О, Al(NO3)3•9Н2О, Се(NO3)3•6Н2О and two kinds of organic fuel, sucrose (C12H22O11) and carbamide (СO(NH2)2) with the addition of hexamethylenetetramine ((CH2)6N4) were used. The obtained samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and photoluminescence spectroscopy. It is found that primary particle diameter of YAG:Ce (average size of the coherent scattering) is 45 nm. Filled Polymer Composites (FPC) was formed by extrusion in the form of tape using as matrix a transparent high-density polyethylene. It has been established that the FPC luminesces with a maximum at the wavelength of 560 nm (yellow light) when excited at the wavelength of 465 nm (blue LED), and the total emission from the composite shows a bright white light. |
|---|