Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2

Model well-defined MoO3/Al2O3 and MoO3/SiO2 systems were rationally designed by anchoring of MoOCl4 on the supports surface of fumed Al2O3 and SiO2 nanoparticles. The subsequent hydrolysis of the anchored groups by water vapours followed by thermal treatment resulted in the formation of Mo(VI) oxo-s...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2024
Автори: Плюто, Ю.В., Шаранда, Л.Ф., Насєдкін, Д.Б., Бабич, І.В.
Формат: Стаття
Мова:Англійська
Опубліковано: Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine 2024
Теми:
Онлайн доступ:https://surfacezbir.com.ua/index.php/surface/article/view/792
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Surface

Репозитарії

Surface
_version_ 1869292008521072640
author Плюто, Ю.В.
Шаранда, Л.Ф.
Насєдкін, Д.Б.
Бабич, І.В.
author_facet Плюто, Ю.В.
Шаранда, Л.Ф.
Насєдкін, Д.Б.
Бабич, І.В.
author_institution_txt_mv []
author_sort Плюто, Ю.В.
baseUrl_str
collection OJS
datestamp_date 2025-02-04T10:40:31Z
description Model well-defined MoO3/Al2O3 and MoO3/SiO2 systems were rationally designed by anchoring of MoOCl4 on the supports surface of fumed Al2O3 and SiO2 nanoparticles. The subsequent hydrolysis of the anchored groups by water vapours followed by thermal treatment resulted in the formation of Mo(VI) oxo-species on the supports surface. By application of the anchoring – hydrolysis cycles the model MoO3/Al2O3 systems with the molybdena loading of 1.10, 1.92 and 2.34 Mo/nm2 were synthesised. The synthesised MoO3/SiO2 systems had a molybdena loading of 0.82, 1.05 and 1.21 Mo/nm2. X-ray diffraction patterns characteristic for MoO3 crystallites were not observed in the synthesised MoO3/Al2O3 and MoO3/SiO2 systems up to the highest achieved molybdena loading of 2.34 and 1.21 Mo/nm2 respectively. This confirms that the used preparation route resulted in the formation of highly dispersed Mo(VI) oxo-species on the surface of both Al2O3 and SiO2 supports. The degree of aggregation of Mo(VI) oxo-species depends on the nature of the support surface and molybdena loading. Increase of the molybdena loading on the surface of both Al2O3 and SiO2 supports results in an increase of the degree of aggregation of Mo(VI) oxo-species. On Al2O3 support, at a molybdena loading which corresponds to the population of surface hydroxyl groups, monomeric Mo(VI) oxo-species appear to be predominant. At higher molybdena loading, the formation of polymeric Mo(VI) oxo-species was detected. On SiO2 support, at a molybdena loading which corresponds or exceeds the population of surface hydroxyl groups, simultaneous presence of monomeric and polymeric Mo(VI) oxo-species was observed.
doi_str_mv 10.15407/Surface.2024.16.164
first_indexed 2025-07-22T19:35:47Z
format Article
fulltext
id oai:ojs.pkp.sfu.ca:article-792
institution Surface
keywords_txt_mv keywords
language English
last_indexed 2026-06-29T01:16:18Z
publishDate 2024
publisher Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
record_format ojs
resource_txt_mv
spelling oai:ojs.pkp.sfu.ca:article-7922025-02-04T10:40:31Z Characterisation of Mo(VI) oxo-species on the surface of the rationally designed MoO3/Al2O3 and MoO3/SiO2 model systems Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2 Плюто, Ю.В. Шаранда, Л.Ф. Насєдкін, Д.Б. Бабич, І.В. Alumina, silica supports surface chemistry molybdena surface oxo-species UV-Vis spectroscopy оксид алюмінію кремнезем хімія поверхні носіїв оксид молібдену поверхневі оксо-структури УФ-видима спектроскопія Model well-defined MoO3/Al2O3 and MoO3/SiO2 systems were rationally designed by anchoring of MoOCl4 on the supports surface of fumed Al2O3 and SiO2 nanoparticles. The subsequent hydrolysis of the anchored groups by water vapours followed by thermal treatment resulted in the formation of Mo(VI) oxo-species on the supports surface. By application of the anchoring – hydrolysis cycles the model MoO3/Al2O3 systems with the molybdena loading of 1.10, 1.92 and 2.34 Mo/nm2 were synthesised. The synthesised MoO3/SiO2 systems had a molybdena loading of 0.82, 1.05 and 1.21 Mo/nm2. X-ray diffraction patterns characteristic for MoO3 crystallites were not observed in the synthesised MoO3/Al2O3 and MoO3/SiO2 systems up to the highest achieved molybdena loading of 2.34 and 1.21 Mo/nm2 respectively. This confirms that the used preparation route resulted in the formation of highly dispersed Mo(VI) oxo-species on the surface of both Al2O3 and SiO2 supports. The degree of aggregation of Mo(VI) oxo-species depends on the nature of the support surface and molybdena loading. Increase of the molybdena loading on the surface of both Al2O3 and SiO2 supports results in an increase of the degree of aggregation of Mo(VI) oxo-species. On Al2O3 support, at a molybdena loading which corresponds to the population of surface hydroxyl groups, monomeric Mo(VI) oxo-species appear to be predominant. At higher molybdena loading, the formation of polymeric Mo(VI) oxo-species was detected. On SiO2 support, at a molybdena loading which corresponds or exceeds the population of surface hydroxyl groups, simultaneous presence of monomeric and polymeric Mo(VI) oxo-species was observed. Модельні системи MoO3/Al2O3 і MoO3/SiO2 з добре визначеною структурою були цілеспрямовано створені закріпленням MoOCl4 на поверхні наночастинок пірогенних носіїв Al2O3 і SiO2. Подальший гідроліз закріплених груп водяною парою та наступна термічна обробка приводили до утворення Mo(VI) оксо-структур на поверхні носіїв. Застосуванням циклів закріплення-гідролізу синтезовано модельні системи MoO3/Al2O3 із вмістом молібдену 1.10, 1.92 та 2.34 Мо/нм2. Синтезовані системи MoO3/SiO2 мали вміст молібдену 0.82, 1.05 та 1.21 Mo/нм2. У синтезованих системах MoO3/Al2O3 і MoO3/SiO2 із вмістом молібдену нижче відповідно 2.34 і 1.21 Mo/нм2 не спостерігалося рентгенівської дифракційної картини, характерної для кристалітів MoO3. Це підтверджує, що використаний спосіб синтезу привів до утворення високодисперсних Mo(VI) оксо-структур на поверхні як Al2O3, так і SiO2 носіїв. Ступінь агрегації Mo(VI) оксо-структур залежить від природи поверхні носія та вмісту молібдену. Збільшення вмісту молібдену на поверхні як Al2O3, так і SiO2 носіїв приводить до підвищення ступеня агрегації Mo(VI) оксо-структур. На поверхні Al2O3 при вмісті молібдену, що відповідає або перевищує кількість наявних гідроксильних груп, мономерні Mo(VI) оксо-структури є переважаючими. При більш високому вмісті молібдену було виявлено утворення полімерних Mo(VI) оксо-структур. На поверхні SiO2 при вмісті молібдену, що відповідає або перевищує кількість наявних гідроксильних груп, спостерігалася одночасна присутність мономерних і полімерних Mo(VI) оксо-структур. Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine 2024-11-24 Article Article application/pdf https://surfacezbir.com.ua/index.php/surface/article/view/792 10.15407/Surface.2024.16.164 Surface; No. 16(31) (2024): Surface; 164-172 Поверхность; № 16(31) (2024): Поверхня; 164-172 Поверхня; № 16(31) (2024): Поверхня; 164-172 3154-8091 3154-8083 10.15407/Surface.2024.16 en https://surfacezbir.com.ua/index.php/surface/article/view/792/785 Авторське право (c) 2024 Ю.В. Плюто, Л.Ф. Шаранда, Д.Б. Насєдкін, І.В. Бабич
spellingShingle оксид алюмінію
кремнезем
хімія поверхні носіїв
оксид молібдену
поверхневі оксо-структури
УФ-видима спектроскопія
Плюто, Ю.В.
Шаранда, Л.Ф.
Насєдкін, Д.Б.
Бабич, І.В.
Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2
title Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2
title_alt Characterisation of Mo(VI) oxo-species on the surface of the rationally designed MoO3/Al2O3 and MoO3/SiO2 model systems
title_full Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2
title_fullStr Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2
title_full_unstemmed Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2
title_short Дослідження Mo(VI) оксо-структур на поверхні цілеспрямовано створених модельних систем MoO3/Al2O3 ТА MoO3/SiO2
title_sort дослідження mo(vi) оксо-структур на поверхні цілеспрямовано створених модельних систем moo3/al2o3 та moo3/sio2
topic оксид алюмінію
кремнезем
хімія поверхні носіїв
оксид молібдену
поверхневі оксо-структури
УФ-видима спектроскопія
topic_facet Alumina
silica
supports surface chemistry
molybdena
surface oxo-species
UV-Vis spectroscopy
оксид алюмінію
кремнезем
хімія поверхні носіїв
оксид молібдену
поверхневі оксо-структури
УФ-видима спектроскопія
url https://surfacezbir.com.ua/index.php/surface/article/view/792
work_keys_str_mv AT plûtoûv characterisationofmovioxospeciesonthesurfaceoftherationallydesignedmoo3al2o3andmoo3sio2modelsystems
AT šarandalf characterisationofmovioxospeciesonthesurfaceoftherationallydesignedmoo3al2o3andmoo3sio2modelsystems
AT nasêdkíndb characterisationofmovioxospeciesonthesurfaceoftherationallydesignedmoo3al2o3andmoo3sio2modelsystems
AT babičív characterisationofmovioxospeciesonthesurfaceoftherationallydesignedmoo3al2o3andmoo3sio2modelsystems
AT plûtoûv doslídžennâmovioksostrukturnapoverhnícílesprâmovanostvorenihmodelʹnihsistemmoo3al2o3tamoo3sio2
AT šarandalf doslídžennâmovioksostrukturnapoverhnícílesprâmovanostvorenihmodelʹnihsistemmoo3al2o3tamoo3sio2
AT nasêdkíndb doslídžennâmovioksostrukturnapoverhnícílesprâmovanostvorenihmodelʹnihsistemmoo3al2o3tamoo3sio2
AT babičív doslídžennâmovioksostrukturnapoverhnícílesprâmovanostvorenihmodelʹnihsistemmoo3al2o3tamoo3sio2