Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків
The results of the study of the adsorption-structural, physicomechanical, physicochemical characteristics of micropowders of the ASM brand with a grain size of 20/14 and grinding powders of the AC20 brand with a grain size of 100/80 of synthetic diamond as-is and after modification are presented. Th...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , , , , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine
2025
|
| Теми: | |
| Онлайн доступ: | https://surfacezbir.com.ua/index.php/surface/article/view/809 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Surface |
Репозитарії
Surface| _version_ | 1869292033534853120 |
|---|---|
| author | Oлійник, Н. O. Ільницька, Г. Д. Сизоненко, O. М. Петасюк, Г. A. Торпаков, А. С. Базалій, Г. А. Заболотний, С. Д. Циба, M. M. |
| author_facet | Oлійник, Н. O. Ільницька, Г. Д. Сизоненко, O. М. Петасюк, Г. A. Торпаков, А. С. Базалій, Г. А. Заболотний, С. Д. Циба, M. M. |
| author_institution_txt_mv | [] |
| author_sort | Oлійник, Н. O. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2026-02-12T08:53:33Z |
| description | The results of the study of the adsorption-structural, physicomechanical, physicochemical characteristics of micropowders of the ASM brand with a grain size of 20/14 and grinding powders of the AC20 brand with a grain size of 100/80 of synthetic diamond as-is and after modification are presented. The modification was performed by a chemical method using a nitric acid solution and pulsed treatment with high-voltage electric discharges in an aqueous medium (HVED) with subsequent chemical purification of the powder. The was determined by analyzing the isotherms of low-temperature nitrogen adsorption-desorption (77 K) at p/pS = 0.99, which were obtained on a gas adsorption analyzer NOVA 2200 "Quantachrome" (USA). The surface topography was determined using scanning microscopy methods; morphometric characteristics - using the DiaInspect. OSM device from Vollstaedt Diamant GmbH. The physicomechanical and physicochemical characteristics of the powders were determined according to state regulatory documents. It was established that the modification of micropowders and grinding powders by both methods has the same tendency to change the physicomechanical, physicochemical and adsorption-structural characteristics of the powders. The content of impurities, the value of the incombustible residue decrease specific magnetic susceptibility, the value of the specific electrical resistance increase; abrasive ability, uniformity in size, and the coefficient of surface activity. The powders before and after modification have a developed mesoporous surface structure. Modification leads to a decrease in the specific surface area of the powder; an increase in adsorption energy; the total pore volume and does not significantly change the shape of the grains. A more rounded shape and the greatest stability and uniformity are characteristic of grains after chemical modification, a rougher surface is present in grains after HVED modification. |
| doi_str_mv | 10.15407/Surface.2025.17.282 |
| first_indexed | 2025-07-22T19:35:55Z |
| format | Article |
| fulltext | |
| id | oai:ojs.pkp.sfu.ca:article-809 |
| institution | Surface |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-06-29T01:16:42Z |
| publishDate | 2025 |
| publisher | Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine |
| record_format | ojs |
| resource_txt_mv | |
| spelling | oai:ojs.pkp.sfu.ca:article-8092026-02-12T08:53:33Z Study of adsorption and structural characteristics of the surface of synthetic diamond powders Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків Oлійник, Н. O. Ільницька, Г. Д. Сизоненко, O. М. Петасюк, Г. A. Торпаков, А. С. Базалій, Г. А. Заболотний, С. Д. Циба, M. M. synthetic diamond powder micro- and grinding powders adsorption-structural physico-chemical physico-mechanical and morphometric characteristics порошок синтетичного алмазу мікро- та шліфпорошки адсорбційно-структурні фізико-хімічні фізико-механічні та морфометричні характеристики The results of the study of the adsorption-structural, physicomechanical, physicochemical characteristics of micropowders of the ASM brand with a grain size of 20/14 and grinding powders of the AC20 brand with a grain size of 100/80 of synthetic diamond as-is and after modification are presented. The modification was performed by a chemical method using a nitric acid solution and pulsed treatment with high-voltage electric discharges in an aqueous medium (HVED) with subsequent chemical purification of the powder. The was determined by analyzing the isotherms of low-temperature nitrogen adsorption-desorption (77 K) at p/pS = 0.99, which were obtained on a gas adsorption analyzer NOVA 2200 "Quantachrome" (USA). The surface topography was determined using scanning microscopy methods; morphometric characteristics - using the DiaInspect. OSM device from Vollstaedt Diamant GmbH. The physicomechanical and physicochemical characteristics of the powders were determined according to state regulatory documents. It was established that the modification of micropowders and grinding powders by both methods has the same tendency to change the physicomechanical, physicochemical and adsorption-structural characteristics of the powders. The content of impurities, the value of the incombustible residue decrease specific magnetic susceptibility, the value of the specific electrical resistance increase; abrasive ability, uniformity in size, and the coefficient of surface activity. The powders before and after modification have a developed mesoporous surface structure. Modification leads to a decrease in the specific surface area of the powder; an increase in adsorption energy; the total pore volume and does not significantly change the shape of the grains. A more rounded shape and the greatest stability and uniformity are characteristic of grains after chemical modification, a rougher surface is present in grains after HVED modification. Подаються результати дослідження адсорбційно-структурних, фізико-механічних, фізико-хімічних характеристик мікропорошків марки АСМ зернистістю 20/14 та шліфпорошків марки АС20 зернистістю 100/80 синтетичного алмазу вихідних та після модифікування. Модифікування виконували хімічним методом при застосуванні розчину нітрогенної кислоти та імпульсним обробленням високовольтними електричними розрядами у водному середовищі (ВЕР) при наступному хімічному очищенні порошку. Визначали шляхом аналізу ізотерм низькотемпературної адсорбції-десорбції азоту (77 К) при p/pS = 0.99, які отримано на газоадсорбційному аналізаторі NOVA 2200 «Quantachrome» (США). Топографію поверхні визначали із застосуванням методів скануючої мікроскопії; морфометричні характеристики – із застосуванням приладу DiaInspect.OSM фірми Vollstaеdt Diаmant GmbH. Фізико-механічні та фізико-хімічні характеристики порошків визначали за державними нормативними документами. Встановлено, що модифікування мікропорошків та шліфпорошків обома способами має однакову тенденцією зміни фізико-механічних, фізико-хімічних та адсорбційно-структурних характеристик  порошків. Зменшуються вміст домішок, величини неспалимого залишку. питомої магнітної сприйнятливості, зростають величина питомого електричного опору; абразивна здатність, однорідність за розмірами, коефіцієнт поверхневої активності. Порошки до та після модифікування мають розвинену мезопористу структуру поверхні. Модифікування призводить до зниження  питомої площі поверхні порошку; підвищення енергії адсорбції; сумарного об'єму пор та  суттєво не змінює форму зерен. Більш округла форма та найбільша стабільність та однорідність властиві зернам після хімічного модифікування, більш шорстка поверхня притаманна зернам після ВЕР модифікування. Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine 2025-11-26 Article Article application/pdf https://surfacezbir.com.ua/index.php/surface/article/view/809 10.15407/Surface.2025.17.282 Surface; No. 17(32) (2025): Surface; 282–290 Поверхность; № 17(32) (2025): Поверхня; 282–290 Поверхня; № 17(32) (2025): Поверхня; 282–290 3154-8091 3154-8083 10.15407/Surface.2025.17 uk https://surfacezbir.com.ua/index.php/surface/article/view/809/801 Авторське право (c) 2025 Н. O. Oлійник, Г. Д. Ільницька, O. М. Сизоненко, Г. A. Петасюк, А. С. Торпаков, Г. А. Базалій, С. Д. Заболотний, M. M. Циба |
| spellingShingle | порошок синтетичного алмазу мікро- та шліфпорошки адсорбційно-структурні фізико-хімічні фізико-механічні та морфометричні характеристики Oлійник, Н. O. Ільницька, Г. Д. Сизоненко, O. М. Петасюк, Г. A. Торпаков, А. С. Базалій, Г. А. Заболотний, С. Д. Циба, M. M. Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| title | Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| title_alt | Study of adsorption and structural characteristics of the surface of synthetic diamond powders |
| title_full | Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| title_fullStr | Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| title_full_unstemmed | Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| title_short | Дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| title_sort | дослідження адсорбційно-структурних характеристик поверхні синтетичних алмазних порошків |
| topic | порошок синтетичного алмазу мікро- та шліфпорошки адсорбційно-структурні фізико-хімічні фізико-механічні та морфометричні характеристики |
| topic_facet | synthetic diamond powder micro- and grinding powders adsorption-structural physico-chemical physico-mechanical and morphometric characteristics порошок синтетичного алмазу мікро- та шліфпорошки адсорбційно-структурні фізико-хімічні фізико-механічні та морфометричні характеристики |
| url | https://surfacezbir.com.ua/index.php/surface/article/view/809 |
| work_keys_str_mv | AT olíjnikno studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT ílʹnicʹkagd studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT sizonenkoom studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT petasûkga studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT torpakovas studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT bazalíjga studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT zabolotnijsd studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT cibamm studyofadsorptionandstructuralcharacteristicsofthesurfaceofsyntheticdiamondpowders AT olíjnikno doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT ílʹnicʹkagd doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT sizonenkoom doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT petasûkga doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT torpakovas doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT bazalíjga doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT zabolotnijsd doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív AT cibamm doslídžennâadsorbcíjnostrukturnihharakteristikpoverhnísintetičnihalmaznihporoškív |