SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES

In the work, a bimetallic cobalt-titanium oxide CoTiO3 with a perovskite structure was synthesized by a simple method of spontaneous hydrolysis with subsequent thermal annealing. The influence of the presence of hyd­rogen peroxide during synthesis and annealing temperature on the phase composition,...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2026
Автори: Shmatok, Yurii, Globa, Nataliy, Lisnycha, Tatyana, Pershina, Katherine
Формат: Стаття
Мова:Англійська
Опубліковано: V.I.Vernadsky Institute of General and Inorganic Chemistry 2026
Онлайн доступ:https://ucj.org.ua/index.php/journal/article/view/778
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Ukrainian Chemistry Journal

Репозитарії

Ukrainian Chemistry Journal
_version_ 1867026080269860864
author Shmatok, Yurii
Globa, Nataliy
Lisnycha, Tatyana
Pershina, Katherine
author_facet Shmatok, Yurii
Globa, Nataliy
Lisnycha, Tatyana
Pershina, Katherine
author_sort Shmatok, Yurii
baseUrl_str https://ucj.org.ua/index.php/journal/oai
collection OJS
datestamp_date 2026-06-03T13:56:59Z
description In the work, a bimetallic cobalt-titanium oxide CoTiO3 with a perovskite structure was synthesized by a simple method of spontaneous hydrolysis with subsequent thermal annealing. The influence of the presence of hyd­rogen peroxide during synthesis and annealing temperature on the phase composition, structural, morphological and surface characteristics of the obtained materials was studied using X-ray phase analysis, scanning electron microscopy and porometry. It was shown that the formation of the crystalline phase of perovskite CoTiO3 occurs at annealing temperatures of 500 °C and above. Increasing the annealing temperature from 400 to 800 °C leads to particle enlargement from ~50 nm to 200–400 nm and a concomitant increase in crystallinity. The electrochemical properties of CoTiO3 were studied by galvanostatic cycling in half-cells with lithium and sodium anodes in the voltage range of 0.01–3 V and current densities from 0.1 to 5 A/g. It was found that the increase in crystallinity of CoTiO3 due to an increase in the annealing temperature to 800 °C has a positive effect on the stability of the specific capacity, improves the rate characteristics and reduces the number of activation charge-discharge cycles. In lithium-ion cells, the maximum specific capacity of CoTiO3, which reaches 218 mAh/g after 190 cycles at a current density of 0.1 A/g, and the best stability during cycling and discharge at high current densities are characteristic of samples annealed at a temperature of 800 °C. The specific capa­city of CoTiO3 in the sodium-ion system is almost 2 times lower and is less dependent on the annealing temperature. It is shown that the nature of the alkali metal cation significantly affects the capacitive and kinetic characteristics of CoTiO3, respectively, the better electrochemical properties of CoTiO3 in the lithium system are associated with a higher diffusion ability and smaller kinetic limitations of the Li+ cation compared to the larger Na+ cation.
doi_str_mv 10.33609/2708-129X.92.4.2026.29-51
first_indexed 2026-06-04T01:00:20Z
format Article
id oai:ojs2.1444248.nisspano.web.hosting-test.net:article-778
institution Ukrainian Chemistry Journal
keywords_txt_mv keywords
language English
last_indexed 2026-06-04T01:00:20Z
publishDate 2026
publisher V.I.Vernadsky Institute of General and Inorganic Chemistry
record_format ojs
spelling oai:ojs2.1444248.nisspano.web.hosting-test.net:article-7782026-06-03T13:56:59Z SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES Shmatok, Yurii Globa, Nataliy Lisnycha, Tatyana Pershina, Katherine CoTiO3, perovskite structure, anode material, lithium-ion battery, sodium-ion battery. In the work, a bimetallic cobalt-titanium oxide CoTiO3 with a perovskite structure was synthesized by a simple method of spontaneous hydrolysis with subsequent thermal annealing. The influence of the presence of hyd­rogen peroxide during synthesis and annealing temperature on the phase composition, structural, morphological and surface characteristics of the obtained materials was studied using X-ray phase analysis, scanning electron microscopy and porometry. It was shown that the formation of the crystalline phase of perovskite CoTiO3 occurs at annealing temperatures of 500 °C and above. Increasing the annealing temperature from 400 to 800 °C leads to particle enlargement from ~50 nm to 200–400 nm and a concomitant increase in crystallinity. The electrochemical properties of CoTiO3 were studied by galvanostatic cycling in half-cells with lithium and sodium anodes in the voltage range of 0.01–3 V and current densities from 0.1 to 5 A/g. It was found that the increase in crystallinity of CoTiO3 due to an increase in the annealing temperature to 800 °C has a positive effect on the stability of the specific capacity, improves the rate characteristics and reduces the number of activation charge-discharge cycles. In lithium-ion cells, the maximum specific capacity of CoTiO3, which reaches 218 mAh/g after 190 cycles at a current density of 0.1 A/g, and the best stability during cycling and discharge at high current densities are characteristic of samples annealed at a temperature of 800 °C. The specific capa­city of CoTiO3 in the sodium-ion system is almost 2 times lower and is less dependent on the annealing temperature. It is shown that the nature of the alkali metal cation significantly affects the capacitive and kinetic characteristics of CoTiO3, respectively, the better electrochemical properties of CoTiO3 in the lithium system are associated with a higher diffusion ability and smaller kinetic limitations of the Li+ cation compared to the larger Na+ cation. V.I.Vernadsky Institute of General and Inorganic Chemistry 2026-05-25 Article Article application/pdf https://ucj.org.ua/index.php/journal/article/view/778 10.33609/2708-129X.92.4.2026.29-51 Ukrainian Chemistry Journal; Vol. 92 No. 4 (2026): Ukrainian Chemistry Journal; 29-51 Украинский химический журнал; Том 92 № 4 (2026): Ukrainian Chemistry Journal; 29-51 Український хімічний журнал; Том 92 № 4 (2026): Ukrainian Chemistry Journal; 29-51 2708-129X 2708-1281 en https://ucj.org.ua/index.php/journal/article/view/778/411
spellingShingle Shmatok, Yurii
Globa, Nataliy
Lisnycha, Tatyana
Pershina, Katherine
SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES
title SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES
title_full SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES
title_fullStr SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES
title_full_unstemmed SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES
title_short SYNTHESIS, PHYSICOCHEMICAL AND ELECTROCHEMICAL CHARACTERISTICS OF CoTiO3 PEROVSKITES AS ANODE MATERIALS FOR LITHIUM- AND SODIUM-ION BATTERIES
title_sort synthesis, physicochemical and electrochemical characteristics of cotio3 perovskites as anode materials for lithium- and sodium-ion batteries
topic_facet CoTiO3
perovskite structure
anode material
lithium-ion battery
sodium-ion battery.
url https://ucj.org.ua/index.php/journal/article/view/778
work_keys_str_mv AT shmatokyurii synthesisphysicochemicalandelectrochemicalcharacteristicsofcotio3perovskitesasanodematerialsforlithiumandsodiumionbatteries
AT globanataliy synthesisphysicochemicalandelectrochemicalcharacteristicsofcotio3perovskitesasanodematerialsforlithiumandsodiumionbatteries
AT lisnychatatyana synthesisphysicochemicalandelectrochemicalcharacteristicsofcotio3perovskitesasanodematerialsforlithiumandsodiumionbatteries
AT pershinakatherine synthesisphysicochemicalandelectrochemicalcharacteristicsofcotio3perovskitesasanodematerialsforlithiumandsodiumionbatteries